1998 Honda Civic Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Camshaft Seal parts are listed for the 1998 Honda Civic, from CONTINENTAL, FEL-PRO, MAHLE / CLEVITE and 10 other brands. CONTINENTAL CS11429 carries the "Popular" badge. 12 parts fit every engine; the other 1 is engine-specific.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Connecting Rod Bearing parts for the 1998 Honda Civic come from 6 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 3 other brands. The "Popular" part is MAHLE / CLEVITE CB1461HN. 4 parts fit every engine; the other 9 are engine-specific.

The High Performance section lists 6 options from KING ENGINE BEARINGS and MAHLE / CLEVITE — engineered beyond original-equipment specification. MAHLE / CLEVITE CB1461HN is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 3 other brands supply 7 parts: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4046AM.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 1998 Honda Civic — ARP 2086001.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Conversion / Lower Gasket Set parts for the 1998 Honda Civic come from 8 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 5 other brands. The "Popular" part is APEX ACS1030. 3 parts fit every engine; the other 7 are engine-specific.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: ENGINETECH 852700.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts are listed for the 1998 Honda Civic, from MAHLE / CLEVITE, KING ENGINE BEARINGS, TOPLINE and 3 other brands. KING ENGINE BEARINGS MB5568AM carries the "Popular" badge. 6 parts fit every engine; the other 4 are engine-specific.

High Performance: 2 parts, from KING ENGINE BEARINGS and MAHLE / CLEVITE. A representative part number is KING ENGINE BEARINGS MB5568XP.

The Standard Replacement section: 8 options from MAHLE / CLEVITE, TOPLINE, KING ENGINE BEARINGS and 3 other brands. KING ENGINE BEARINGS MB5568AM is listed in this group.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 1998 Honda Civic, from BCA, FEL-PRO, SCHAEFFLER and 2 other brands. BCA NS99315 carries the "Popular" badge. All of them fit every engine offered in the 1998 Civic.

Part numbers include BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3549, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

24 Crankshaft Seal parts are listed for the 1998 Honda Civic, from VICTOR REINZ, NATIONAL, APEX and 12 other brands. FEL-PRO TCS45989 carries the "Popular" badge. 19 parts fit every engine; the other 5 are engine-specific.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE JV1171.

This table covers the bolts that clamp the cylinder head to the block. Read more

7 Cylinder Head Bolt parts for the 1998 Honda Civic come from 6 brands — ELRING, ARP, ENGINETECH and 3 other brands. The "Popular" part is ARP 2084305. 3 parts fit every engine; the other 4 are engine-specific.

This group includes ARP 2084305, ENGINETECH HB295 and APEX AHB130 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Cylinder Head Gasket parts for the 1998 Honda Civic come from 8 brands — ELRING, FEL-PRO, MAHLE / CLEVITE and 5 other brands. The "Popular" part is FEL-PRO 9915PT. 3 parts fit every engine; the other 7 are engine-specific.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

15 Cylinder Head Gasket Set parts for the 1998 Honda Civic come from 10 brands — ELRING, SKP, ITM ENGINE COMPONENTS and 7 other brands. The "Popular" part is APEX AHS1030. 5 parts fit every engine; the other 10 are engine-specific.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302188.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

2 Cylinder Repair Sleeve parts for the 1998 Honda Civic come from MELLING.

Part numbers include MELLING CSL616 and MELLING CSL716.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1998 Honda Civic — KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO HO1228143.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts for the 1998 Honda Civic come from 5 brands — FEL-PRO, AJUSA, APEX and 2 other brands. The "Popular" part is FEL-PRO 2601782. 1 part fits every engine; the other 4 are engine-specific.

Part numbers include FEL-PRO 2601782, AJUSA 50164200 and APEX AFS1030, among others listed above.

This table covers the Engine rebuild kits. Read more

2 Engine Rebuild Kit parts for the 1998 Honda Civic come from ENGINETECH. Every part fits both the 1.6L L4 and the 1.6L L4 CNG.

Part numbers include ENGINETECH RCHO16P and ENGINETECH RCHO16AP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts are listed for the 1998 Honda Civic, from ITM ENGINE COMPONENTS, SBI, MELLING and 2 other brands. ITM ENGINE COMPONENTS RX9527 carries the "Popular" badge. 2 parts fit every engine; the other 5 are engine-specific.

Listed part numbers: ITM ENGINE COMPONENTS RX9527, MELLING V5525 and ITM ENGINE COMPONENTS RX9527HP, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 1998 Honda Civic come from 4 brands — SKP, ATP, DAYCO and 1 other brand. Every part fits both the 1.6L L4 and the 1.6L L4 CNG.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594225 is listed in this group.

Standard Replacement: 3 parts, from ATP, DAYCO and PIONEER. A representative part number is ATP 102280.

This group includes SKP SK594225, ATP 102280 and DAYCO PB1574N and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 1998 Honda Civic come from 8 brands — APEX, FEL-PRO, AJUSA and 5 other brands. The "Popular" part is APEX AMS1300. 5 parts fit every engine; the other 3 are engine-specific.

Part numbers include APEX AMS1300, FEL-PRO MS91485 and AJUSA 13130400, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts are listed for the 1998 Honda Civic, from ITM ENGINE COMPONENTS, ENGINETECH, MELLING and 3 other brands. ENGINETECH IM2756 carries the "Popular" badge. 3 parts fit every engine; the other 4 are engine-specific.

This group includes ENGINETECH IM2756, MELLING V5524 and ITM ENGINE COMPONENTS RV9524 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

26 Motor Mount parts are listed for the 1998 Honda Civic, from DEA / MARMON RIDE CONTROL, SKP, ANCHOR and 4 other brands. SKP SKM8435 carries the "Popular" badge. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 22 parts from DEA / MARMON RIDE CONTROL, ANCHOR, BECK/ARNLEY and 3 other brands.

This table covers the Motor Mount inserts. Read more

This group shows a single part: ENERGY SUSPENSION 161105G.

This table covers the Motor Mount kits. Read more

5 Motor Mount Kit parts are listed for the 1998 Honda Civic, from ANCHOR, SKP and DEA / MARMON RIDE CONTROL. 4 parts fit every engine; the other 1 is engine-specific.

This group includes ANCHOR 301321, ANCHOR 301322 and DEA / MARMON RIDE CONTROL MK5510 and the remaining parts above.