1999 Honda Civic Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Camshaft Seal parts for the 1999 Honda Civic come from 12 brands — CONTINENTAL, FEL-PRO, MAHLE / CLEVITE and 9 other brands. The "Popular" part is CONTINENTAL CS11429.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

KING ENGINE BEARINGS supplies the 5 Connecting Rod Bearing parts for the 1999 Honda Civic. KING ENGINE BEARINGS CR4046AM carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 4 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4046XPC.

The Standard Replacement section lists 1 option from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS CR4046AM is listed in this group.

This group includes KING ENGINE BEARINGS CR4046AM, KING ENGINE BEARINGS CR4046XPC and KING ENGINE BEARINGS CR4046XPCX and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 1999 Honda Civic, from APEX, FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: APEX ACS1030, FEL-PRO CS99152 and MAHLE / CLEVITE CS54234A.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts for the 1999 Honda Civic come from 3 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS and ITM ENGINE COMPONENTS. The "Popular" part is KING ENGINE BEARINGS MB5568AM.

The High Performance section: 2 options from KING ENGINE BEARINGS and MAHLE / CLEVITE. KING ENGINE BEARINGS MB5568XP is listed in this group.

Standard Replacement: 4 parts, from MAHLE / CLEVITE, KING ENGINE BEARINGS and ITM ENGINE COMPONENTS. A representative part number is KING ENGINE BEARINGS MB5568AM.

Part numbers include KING ENGINE BEARINGS MB5568AM, KING ENGINE BEARINGS MB5568XP and MAHLE / CLEVITE MS1804H, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 1999 Honda Civic come from 5 brands — BCA, FEL-PRO, SCHAEFFLER and 2 other brands. The "Popular" part is BCA NS99315.

Listed part numbers: BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3549, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

19 Crankshaft Seal parts for the 1999 Honda Civic come from 13 brands — SCHAEFFLER, NATIONAL, APEX and 10 other brands. The "Popular" part is FEL-PRO TCS45989.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1999 Honda Civic — MAHLE / CLEVITE JV1171.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 1999 Honda Civic, from APEX, ELRING and SKP.

Listed part numbers: APEX AHB130, ELRING 022590 and SKP SKHB295.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 1999 Honda Civic, from APEX, ELRING, FEL-PRO and 1 other brand.

This group includes APEX AHG130, ELRING 864250 and FEL-PRO 9915PT and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 1999 Honda Civic, from FEL-PRO, APEX, ELRING and 2 other brands. FEL-PRO HS9915PT1 carries the "Popular" badge.

This group includes FEL-PRO HS9915PT1, APEX AHS1030 and ELRING 051940 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

One part is listed for the 1999 Honda Civic — TECHPRO HO1228143.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1999 Honda Civic — APEX AFS1030.

This table covers the Engine rebuild kits. Read more

ENGINETECH supplies both parts for the 1999 Honda Civic.

Part numbers include ENGINETECH RCHO16P and ENGINETECH RCHO16AP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 1999 Honda Civic come from 2 brands — QUALCAST and ITM ENGINE COMPONENTS.

Listed part numbers: ITM ENGINE COMPONENTS RX9527HP, QUALCAST 1010525 and QUALCAST 1010435.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 1999 Honda Civic, from SKP, ATP, DAYCO and 1 other brand.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594225.

The Standard Replacement section: 3 options from ATP, DAYCO and PIONEER. ATP 102280 is listed in this group.

Part numbers include SKP SK594225, ATP 102280 and DAYCO PB1574N, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 1999 Honda Civic, from APEX, FEL-PRO, BECK/ARNLEY and 3 other brands. APEX AMS1300 carries the "Popular" badge.

Part numbers include APEX AMS1300, FEL-PRO MS91485 and BECK/ARNLEY 0376006, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts for the 1999 Honda Civic come from 2 brands — ITM ENGINE COMPONENTS and QUALCAST.

Part numbers include ITM ENGINE COMPONENTS RV9524, ITM ENGINE COMPONENTS RV9524HP and QUALCAST 1010524, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

24 Motor Mount parts for the 1999 Honda Civic come from 6 brands — SKP, DEA / MARMON RIDE CONTROL, ANCHOR and 3 other brands. The "Popular" part is SKP SKM8435.

The Economy section: 4 options from SKP. SKP SKM8435 is listed in this group.

Standard Replacement: 20 parts, from DEA / MARMON RIDE CONTROL, ANCHOR, BECK/ARNLEY and 2 other brands. A representative part number is DEA / MARMON RIDE CONTROL A6520.

This table covers the Motor Mount kits. Read more

4 Motor Mount Kit parts for the 1999 Honda Civic come from 3 brands — SKP, ANCHOR and DEA / MARMON RIDE CONTROL.

Part numbers include ANCHOR 301321, DEA / MARMON RIDE CONTROL MK5510 and SKP SKM3069K, among others listed above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

74 Oil parts for the 1999 Honda Civic come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is MOBIL 125195. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 43 parts.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1999 Honda Civic.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 1999 Honda Civic come from 2 brands — DORMAN and SKP.

Listed part numbers: DORMAN 917330 and SKP SK917330.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts for the 1999 Honda Civic come from 5 brands — DORMAN, ELRING, ENGINETECH and 2 other brands. The "Popular" part is DORMAN 090033.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 1999 Honda Civic, from DORMAN, APEX, ELRING and 2 other brands. DORMAN 095144 carries the "Popular" badge.

Listed part numbers: DORMAN 095144, APEX ADP1909 and ELRING 243600, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 1999 Honda Civic come from 4 brands — BECK/ARNLEY, GATES, MOTORAD and 1 other brand.

Listed part numbers: BECK/ARNLEY 0160125, GATES 31109 and MOTORAD MO81, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

19 Oil Filter parts for the 1999 Honda Civic come from 15 brands — BOSCH, FRAM, VARIOUS MFR and 12 other brands. The "Popular" part is WIX 51334XP.

The Economy section: 5 options from BOSCH, FRAM, FVP and 2 other brands. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 3 options from WIX, FRAM and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51334XP is listed in this group.

Standard Replacement: 11 parts, from BOSCH, DENSO, WIX and 8 other brands. A representative part number is BOSCH 3312.

This table covers the Oil Filter Support tubes. Read more

One part is listed for the 1999 Honda Civic — AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

6 Oil Pan parts are listed for the 1999 Honda Civic, from SKP, ACKOJA, ATP and 3 other brands. SKP SK264413 carries the "Popular" badge.

Listed part numbers: SKP SK264413, ACKOJA A260101 and ATP 103294, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts for the 1999 Honda Civic come from 6 brands — ELRING, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is ELRING 705110.

Listed part numbers: ELRING 705110, FEL-PRO OS30691R and AJUSA 14070800, plus the other parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

4 Oil Pump parts for the 1999 Honda Civic come from 4 brands — SKP, ULTRA-POWER, ITM ENGINE COMPONENTS and 1 other brand.

The Economy section: 2 options from SKP and ULTRA-POWER. SKP SKOM383 is listed in this group.

Standard Replacement: 2 parts, from ITM ENGINE COMPONENTS and MELLING. A representative part number is ITM ENGINE COMPONENTS 0571346.

This group includes SKP SKOM383, ULTRA-POWER M383 and ITM ENGINE COMPONENTS 0571346 and the remaining parts above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 1999 Honda Civic — ENGINETECH K47524P.

This table covers the rings that seal each piston to the cylinder wall. Read more

8 Piston Ring parts are listed for the 1999 Honda Civic, from HASTINGS MANUFACTURING, ENGINETECH, MAHLE / CLEVITE and 1 other brand. ENGINETECH S75314 carries the "Popular" badge.

The Premium section lists 3 options from ENGINETECH, MAHLE / CLEVITE and SEALED POWER — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH S75314 is listed in this group.

The Standard Replacement section: 5 options from HASTINGS MANUFACTURING. HASTINGS MANUFACTURING 2C4690 is listed in this group.

Listed part numbers: ENGINETECH S75314, MAHLE / CLEVITE 41618 and SEALED POWER E514KC, plus the other parts above.

This table covers the Thrust washers. Read more

3 Thrust Washer parts for the 1999 Honda Civic come from 3 brands — ENGINE PRO, KING ENGINE BEARINGS and MAHLE / CLEVITE.

This group includes ENGINE PRO 13473S, KING ENGINE BEARINGS TW140AM and MAHLE / CLEVITE TW473S.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

10 Timing Belt parts are listed for the 1999 Honda Civic, from GATES, CLOYES, ULTRA-POWER and 6 other brands. GATES T224RB carries the "Popular" badge.

Economy: 2 parts, from CLOYES and ULTRA-POWER. A representative part number is CLOYES B224.

High Performance: 1 part, from GATES. A representative part number is GATES T224RB.

The Standard Replacement section: 7 options from GATES, ACDELCO, BECK/ARNLEY and 4 other brands. GATES T224 is listed in this group.