1999 Honda Odyssey Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts for the 1999 Honda Odyssey come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts for the 1999 Honda Odyssey come from 13 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 10 other brands. The "Popular" part is FEL-PRO TCS46025.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 1999 Honda Odyssey — TOPLINE CRH38.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts are listed for the 1999 Honda Odyssey, from KING ENGINE BEARINGS, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. ENGINETECH BB1538 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6837XP.

The Standard Replacement section lists 5 options from ENGINETECH, KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and 2 other brands — built to original-equipment specification. ENGINETECH BB1538 is listed in this group.

Listed part numbers: ENGINETECH BB1538, KING ENGINE BEARINGS CR6837XP and KING ENGINE BEARINGS CR6837SM, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts are listed for the 1999 Honda Odyssey, from APEX, ENGINETECH, AJUSA and 5 other brands. APEX ACS1040 carries the "Popular" badge.

Part numbers include APEX ACS1040, ENGINETECH HO35CSA and AJUSA 54094400, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts for the 1999 Honda Odyssey come from 5 brands — TOPLINE, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ENGINETECH BC1537.

This group includes ENGINETECH BC1537, MAHLE / CLEVITE MS2335A and ITM ENGINE COMPONENTS 4M1201 and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 1999 Honda Odyssey come from 3 brands — SCHAEFFLER, TIMKEN and WJB / INMOTION PARTS. The "Popular" part is WJB / INMOTION PARTS WS99317.

Listed part numbers: WJB / INMOTION PARTS WS99317, SCHAEFFLER SR3549 and SCHAEFFLER SR3486, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts for the 1999 Honda Odyssey come from 15 brands — ELRING, APEX, VICTOR REINZ and 12 other brands. The "Popular" part is APEX ABS128.

This table covers the bolts that clamp the cylinder head to the block. Read more

10 Cylinder Head Bolt parts are listed for the 1999 Honda Odyssey, from ELRING, VICTOR REINZ, ENGINETECH and 5 other brands. ENGINETECH HB265 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 1999 Honda Odyssey, from APEX, FEL-PRO, AJUSA and 5 other brands. APEX AHG142 carries the "Popular" badge.

Part numbers include APEX AHG142, FEL-PRO 26260PT and AJUSA 10125500, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Cylinder Head Gasket Set parts are listed for the 1999 Honda Odyssey, from ENGINETECH, FEL-PRO, AJUSA and 4 other brands. ENGINETECH HO35HSA carries the "Popular" badge.

This group includes ENGINETECH HO35HSA, FEL-PRO HS26260PT and AJUSA 52167100 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 1999 Honda Odyssey come from KAT'S HEATERS.

This group includes KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

One part is listed for the 1999 Honda Odyssey — TECHPRO HO1228105.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 1999 Honda Odyssey, from ITM ENGINE COMPONENTS, AJUSA, APEX and 2 other brands. ITM ENGINE COMPONENTS 0900818 carries the "Popular" badge.

This group includes ITM ENGINE COMPONENTS 0900818, AJUSA 50181100 and APEX AFS1042 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts for the 1999 Honda Odyssey come from 6 brands — ENGINETECH, ITM ENGINE COMPONENTS, MELLING and 3 other brands. The "Popular" part is ENGINETECH EM4349.

Part numbers include ENGINETECH EM4349, ITM ENGINE COMPONENTS RX9558 and MELLING V5542, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 1999 Honda Odyssey, from SKP, ATP, DAYCO and 1 other brand.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594300.

The Standard Replacement section: 3 options from ATP, DAYCO and PIONEER. ATP 102275 is listed in this group.

Listed part numbers: SKP SK594300, ATP 102275 and DAYCO PB1575N, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Manifold Gasket parts are listed for the 1999 Honda Odyssey, from BECK/ARNLEY, AJUSA, ITM ENGINE COMPONENTS and 4 other brands. BECK/ARNLEY 0376168 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Intake Plenum Gasket parts for the 1999 Honda Odyssey come from 7 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 4 other brands. The "Popular" part is FEL-PRO MS961671.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 1999 Honda Odyssey come from 7 brands — ENGINETECH, MELLING, ITM ENGINE COMPONENTS and 4 other brands. The "Popular" part is ENGINETECH IM4348.

Listed part numbers: ENGINETECH IM4348, MELLING V5541 and ITM ENGINE COMPONENTS RV9560, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

19 Motor Mount parts for the 1999 Honda Odyssey come from 6 brands — WESTAR, SKP, ANCHOR and 3 other brands. The "Popular" part is ANCHOR 8974.

The Economy section: 3 options from SKP. SKP SKM8974 is listed in this group.

Standard Replacement: 16 parts, from WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. A representative part number is ANCHOR 8974.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: TECHPRO HO4141100.

This table covers the Motor Mount kits. Read more

4 Motor Mount Kit parts for the 1999 Honda Odyssey come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, SKP and 1 other brand.

This group includes ANCHOR 300337, DEA / MARMON RIDE CONTROL MK5505 and SKP SKM3002K and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

67 Oil parts for the 1999 Honda Odyssey come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is MOBIL 125195. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 2 other brands.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1999 Honda Odyssey.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts for the 1999 Honda Odyssey come from 6 brands — DORMAN, ELRING, AGS and 3 other brands. The "Popular" part is DORMAN 090033.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts are listed for the 1999 Honda Odyssey, from DORMAN, FEL-PRO, AJUSA and 3 other brands. DORMAN 095144 carries the "Popular" badge.

Listed part numbers: DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 1999 Honda Odyssey come from 4 brands — BECK/ARNLEY, GATES, MOTORAD and 1 other brand.

This group includes BECK/ARNLEY 0160125, GATES 31109 and MOTORAD MO81 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 1999 Honda Odyssey come from 14 brands — VARIOUS MFR, BOSCH, WIX and 11 other brands. The "Popular" part is BOSCH 72226WS.

The Economy section: 6 options from VARIOUS MFR, BOSCH, FRAM and 2 other brands. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51334XP is listed in this group.

Standard Replacement: 10 parts, from BOSCH, WIX, ACKOJA and 7 other brands. A representative part number is BOSCH 3323.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts are listed for the 1999 Honda Odyssey, from APEX and FEL-PRO.

Listed part numbers: APEX AOM6025 and FEL-PRO 73040.

This table covers the Oil Filter Support tubes. Read more

One part is listed for the 1999 Honda Odyssey — AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

8 Oil Pan parts are listed for the 1999 Honda Odyssey, from SKP, ACKOJA, ATP and 5 other brands. SKP SK264411 carries the "Popular" badge.

Part numbers include SKP SK264411, ACKOJA A260112 and ATP 103293, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pressure Sender / Switch Seal parts for the 1999 Honda Odyssey come from 2 brands — FEL-PRO and JAPANESE OE.

Listed part numbers: FEL-PRO 73196 and JAPANESE OE 91319PAAA01.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

5 Oil Pump parts for the 1999 Honda Odyssey come from 5 brands — SKP, MELLING, ENGINETECH and 2 other brands. The "Popular" part is MELLING M516.

The Economy section: 1 option from SKP. SKP SKPM395 is listed in this group.

Standard Replacement: 4 parts, from MELLING, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. A representative part number is MELLING M516.

Listed part numbers: MELLING M516, SKP SKPM395 and ENGINETECH EP038A, plus the other parts above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts are listed for the 1999 Honda Odyssey, from ELRING and MAHLE / CLEVITE.

Part numbers include ELRING 967650 and MAHLE / CLEVITE JV5083.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Oil Pump Seal parts are listed for the 1999 Honda Odyssey, from TIMKEN, BCA, NATIONAL and 2 other brands. TIMKEN 711181 carries the "Popular" badge.

Listed part numbers: TIMKEN 711181 and BCA NS711181, plus the other parts above.