2001 Honda Civic Engine Parts

This table covers the Camshaft caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

This group shows a single part: AJUSA 00794900.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Camshaft Seal parts are listed for the 2001 Honda Civic, from CONTINENTAL, FEL-PRO, MAHLE / CLEVITE and 10 other brands. CONTINENTAL CS11429 carries the "Popular" badge. 11 parts fit every engine; the other 2 are engine-specific.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts are listed for the 2001 Honda Civic, from APEX and VICTOR REINZ. All of them fit every engine offered in the 2001 Civic.

This group includes APEX ACP101 and VICTOR REINZ 711552200.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts for the 2001 Honda Civic come from 5 brands — ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 2 other brands. The "Popular" part is ENGINETECH BB1501. 4 parts fit every engine; the other 1 is engine-specific.

Part numbers include ENGINETECH BB1501, ITM ENGINE COMPONENTS 4B1204 and KING ENGINE BEARINGS CR4512SI, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Conversion / Lower Gasket Set parts for the 2001 Honda Civic come from 8 brands — FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 5 other brands. The "Popular" part is APEX ACS1043. 6 parts fit every engine; the other 5 are engine-specific.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: ENGINETECH 859000.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Crankshaft Main Bearing parts are listed for the 2001 Honda Civic, from MAHLE / CLEVITE, KING ENGINE BEARINGS, TOPLINE and 2 other brands. KING ENGINE BEARINGS MB5568AM carries the "Popular" badge. 7 parts fit every engine; the other 2 are engine-specific.

In the High Performance grade, KING ENGINE BEARINGS and MAHLE / CLEVITE supply 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS MB5568XP.

The Standard Replacement section lists 7 options from MAHLE / CLEVITE, TOPLINE, KING ENGINE BEARINGS and 2 other brands — built to original-equipment specification. KING ENGINE BEARINGS MB5568AM is listed in this group.

This group includes KING ENGINE BEARINGS MB5568AM, KING ENGINE BEARINGS MB5568XP and MAHLE / CLEVITE MS1804H and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts are listed for the 2001 Honda Civic, from BCA, WJB / INMOTION PARTS, FEL-PRO and 3 other brands. BCA NS99315 carries the "Popular" badge. 7 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: BCA NS99315, FEL-PRO 16275 and BCA NS99147, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

25 Crankshaft Seal parts are listed for the 2001 Honda Civic, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 14 other brands. FEL-PRO BS40430 carries the "Popular" badge. 24 parts fit every engine; the other 1 is engine-specific.

This table covers the cylinder heads that close the top of the block. Read more

One part is listed for the 2001 Honda Civic — ENGINETECH CH1163R.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts for the 2001 Honda Civic come from 6 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 3 other brands. The "Popular" part is FEL-PRO ES72960. Every part fits both the 1.7L L4 and the 1.7L L4 CNG.

Part numbers include FEL-PRO ES72960, MAHLE / CLEVITE GS33750 and APEX AHB143, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts for the 2001 Honda Civic come from 9 brands — ENGINETECH, FEL-PRO, MAHLE / CLEVITE and 6 other brands. The "Popular" part is ENGINETECH HHO17A. 7 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: ENGINETECH HHO17A, FEL-PRO 26236PT and MAHLE / CLEVITE 54459, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

27 Cylinder Head Gasket Set parts for the 2001 Honda Civic come from 10 brands — FEL-PRO, AJUSA, ITM ENGINE COMPONENTS and 7 other brands. The "Popular" part is APEX AHS1043. A list this long means Cylinder Head Gasket Set applications vary by configuration — the notes carry the qualifiers.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Cylinder Head Plug parts are listed for the 2001 Honda Civic, from JAPANESE OE and MAHLE / CLEVITE. 1 part fits every engine; the other 1 is engine-specific.

This group includes JAPANESE OE KF811285 and MAHLE / CLEVITE B32774.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 2001 Honda Civic come from 2 brands — ENGINETECH and SBI. Every part fits both the 1.7L L4 and the 1.7L L4 CNG.

Listed part numbers: ENGINETECH CHS1069 and SBI 2302189.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 2001 Honda Civic — KAT'S HEATERS 11419.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts for the 2001 Honda Civic come from 5 brands — ITM ENGINE COMPONENTS, ENGINETECH, AJUSA and 2 other brands. The "Popular" part is ENGINETECH HO17K1. 1 part fits every engine; the other 5 are engine-specific.

This group includes ENGINETECH HO17K1, AJUSA 50390700 and APEX AFS1043 and the remaining parts above.

This table covers the Engine rebuild kits. Read more

2 Engine Rebuild Kit parts for the 2001 Honda Civic come from ENGINETECH.

Part numbers include ENGINETECH RCHO17AP and ENGINETECH RCHO17P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts are listed for the 2001 Honda Civic, from SBI, ITM ENGINE COMPONENTS, MELLING and 2 other brands. ITM ENGINE COMPONENTS RX9527 carries the "Popular" badge. 5 parts fit every engine; the other 1 is engine-specific.

Part numbers include ITM ENGINE COMPONENTS RX9527, MELLING V5525 and QUALCAST 1010525, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2001 Honda Civic come from 5 brands — SKP, ATP, DAYCO and 2 other brands. The "Popular" part is SKP SK594192. Every part fits both the 1.7L L4 and the 1.7L L4 CNG.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594192 is listed in this group.

Standard Replacement: 4 parts, from ATP, DAYCO, DORMAN and 1 other brand. A representative part number is ATP 102167.

This group includes SKP SK594192, ATP 102167 and DAYCO PB1344N and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

18 Intake Manifold Gasket parts for the 2001 Honda Civic come from 7 brands — VICTOR REINZ, APEX, FEL-PRO and 4 other brands. The "Popular" part is APEX AMS1430. 2 parts fit every engine; the other 16 are engine-specific.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts are listed for the 2001 Honda Civic, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO MS97333 carries the "Popular" badge.

This group includes FEL-PRO MS97333, AJUSA 01110100 and APEX AMS1434 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts are listed for the 2001 Honda Civic, from ITM ENGINE COMPONENTS, ENGINETECH, MELLING and 3 other brands. ENGINETECH IM2756 carries the "Popular" badge. 6 parts fit every engine; the other 1 is engine-specific.

Part numbers include ENGINETECH IM2756, MELLING V5524 and ITM ENGINE COMPONENTS RV9524, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

25 Motor Mount parts are listed for the 2001 Honda Civic, from WESTAR, SKP, ANCHOR and 3 other brands. SKP SKM8973 carries the "Popular" badge. 13 parts fit every engine; the other 12 are engine-specific.

Economy: 4 parts, from SKP. A representative part number is SKP SKM8973.

The Standard Replacement section: 21 options from WESTAR, ANCHOR, BECK/ARNLEY and 2 other brands. ANCHOR 9277 is listed in this group.

This table covers the Motor Mount inserts. Read more

This group shows a single part: ENERGY SUSPENSION 161111G.

This table covers the Motor Mount kits. Read more

5 Motor Mount Kit parts are listed for the 2001 Honda Civic, from ANCHOR and SKP. SKP SKM3024K carries the "Popular" badge. 1 part fits every engine; the other 4 are engine-specific.

Part numbers include SKP SKM3024K, ANCHOR 301234 and ANCHOR 301223, among others listed above.