2001 Honda S2000 Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Connecting Rod Bearing parts are listed for the 2001 Honda S2000, from MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. ENGINETECH BB1520 carries the "Popular" badge.

In the High Performance grade, MAHLE / CLEVITE and KING ENGINE BEARINGS supply 3 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4033XP.

The Standard Replacement section lists 5 options from MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand — built to original-equipment specification. ENGINETECH BB1520 is listed in this group.

Listed part numbers: ENGINETECH BB1520, KING ENGINE BEARINGS CR4033XP and MAHLE / CLEVITE CB1780H, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 2001 Honda S2000, from AJUSA, APEX and VICTOR REINZ.

Part numbers include AJUSA 54111600, APEX ACS1047 and VICTOR REINZ 085371701.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2001 Honda S2000 come from 3 brands — MAHLE / CLEVITE, TOPLINE and KING ENGINE BEARINGS. The "Popular" part is MAHLE / CLEVITE MS2309H.

The High Performance section: 2 options from MAHLE / CLEVITE. MAHLE / CLEVITE MS2309H is listed in this group.

Standard Replacement: 2 parts, from TOPLINE. A representative part number is TOPLINE TWH36.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: MAHLE / CLEVITE MS2309H, MAHLE / CLEVITE MS2309HX and TOPLINE TWH36, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2001 Honda S2000 come from 5 brands — BCA, NATIONAL, SCHAEFFLER and 2 other brands. The "Popular" part is BCA NS99315.

Listed part numbers: BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3549, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

21 Crankshaft Seal parts for the 2001 Honda S2000 come from 13 brands — ELRING, NATIONAL, ACDELCO and 10 other brands. The "Popular" part is ELRING 590797.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts are listed for the 2001 Honda S2000, from AJUSA, APEX, BECK/ARNLEY and 2 other brands. AJUSA 81028700 carries the "Popular" badge.

Part numbers include AJUSA 81028700, APEX AHB147 and BECK/ARNLEY 0161034, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 2001 Honda S2000, from APEX, FEL-PRO, AJUSA and 3 other brands. APEX AHG147 carries the "Popular" badge.

Part numbers include APEX AHG147, FEL-PRO 26601PT and AJUSA 10136500, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 2001 Honda S2000, from APEX, AJUSA, ENGINETECH and 2 other brands. APEX AHS1047 carries the "Popular" badge.

This group includes APEX AHS1047, AJUSA 52189100 and ENGINETECH HO20HSG and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

TECHPRO supplies both parts for the 2001 Honda S2000.

This group includes TECHPRO HO1228129 and TECHPRO HO1228130.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 2001 Honda S2000, from AJUSA, APEX and ITM ENGINE COMPONENTS.

This group includes AJUSA 50205200, APEX AFS1047 and ITM ENGINE COMPONENTS 0901810.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: TOPLINE EVH43.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2001 Honda S2000, from BECK/ARNLEY, APEX, AJUSA and 2 other brands. APEX AMS1470 carries the "Popular" badge.

Listed part numbers: APEX AMS1470, BECK/ARNLEY 0376122 and AJUSA 13166800, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: TOPLINE IVH43.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Motor Mount parts for the 2001 Honda S2000 come from 3 brands — ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR.

Part numbers include ANCHOR 10334, DEA / MARMON RIDE CONTROL A4564 and WESTAR EM5786.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 301157.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

26 Oil parts for the 2001 Honda S2000 come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is VALVOLINE 797578. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend, with Full Synthetic the largest group at 14 parts from LIQUI MOLY, VALVOLINE, MOBIL and 1 other brand.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2001 Honda S2000.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts for the 2001 Honda S2000 come from 5 brands — DORMAN, AGS, ENGINETECH and 2 other brands. The "Popular" part is DORMAN 090033.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2001 Honda S2000, from ULTRA-POWER, DORMAN, APEX and 1 other brand. DORMAN 095144 carries the "Popular" badge.

Part numbers include DORMAN 095144, APEX ADP1909 and FEL-PRO 73346, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2001 Honda S2000 come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand.

This group includes CALORSTAT OC2315, GATES 31109 and MOTORAD MO81 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts for the 2001 Honda S2000 come from 16 brands — BOSCH, FRAM, VARIOUS MFR and 13 other brands. The "Popular" part is WIX 51334XP.

The Economy section lists 6 options from BOSCH, FAMOUS BRAND, FRAM and 3 other brands — the catalog's value-priced group. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 3 options from WIX, FRAM and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51334XP is listed in this group.

Standard Replacement: 11 parts, from BOSCH, DENSO, WIX and 8 other brands. A representative part number is BOSCH 3312.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2001 Honda S2000 — AJUSA 16021800.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the chains that drive the oil pump. Read more

3 Oil Pump Chain parts are listed for the 2001 Honda S2000, from PREFERRED COMPONENTS INC, INA and S.A. GEAR.

Economy: 1 part, from PREFERRED COMPONENTS INC. A representative part number is PREFERRED COMPONENTS INC C764.

The Standard Replacement section: 2 options from INA and S.A. GEAR. INA ZCC1063 is listed in this group.

This group includes PREFERRED COMPONENTS INC C764, INA ZCC1063 and S.A. GEAR C1063.

This table covers the Oil Pump Chain guides. Read more

3 Oil Pump Chain Guide parts are listed for the 2001 Honda S2000, from INA, PREFERRED COMPONENTS INC and S.A. GEAR.

Part numbers include INA ZG71119, PREFERRED COMPONENTS INC R76027 and S.A. GEAR 71119.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Oil Pump Chain Tensioner parts for the 2001 Honda S2000 come from 3 brands — INA, PREFERRED COMPONENTS INC and S.A. GEAR.

This group includes INA ZT91166, PREFERRED COMPONENTS INC T66119 and S.A. GEAR 91166.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts are listed for the 2001 Honda S2000, from HASTINGS MANUFACTURING, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. ENGINETECH S87124 carries the "Popular" badge.

The Premium section lists 1 option from ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH S87124 is listed in this group.

The Standard Replacement section: 4 options from HASTINGS MANUFACTURING, ITM ENGINE COMPONENTS and TOPLINE. HASTINGS MANUFACTURING 2C5147 is listed in this group.

This group includes ENGINETECH S87124, HASTINGS MANUFACTURING 2C5147 and HASTINGS MANUFACTURING 2C5147S and the remaining parts above.

This table covers the Thrust washers. Read more

2 Thrust Washer parts for the 2001 Honda S2000 come from 2 brands — ITM ENGINE COMPONENTS and KING ENGINE BEARINGS.

Part numbers include ITM ENGINE COMPONENTS 1T1039 and KING ENGINE BEARINGS TW140AM.

This table covers the Timing Cam sprockets. Read more

3 Timing Cam Sprocket parts for the 2001 Honda S2000 come from 3 brands — INA, PREFERRED COMPONENTS INC and S.A. GEAR.

This group includes INA ZSS1340, PREFERRED COMPONENTS INC G56129 and S.A. GEAR S1340.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts are listed for the 2001 Honda S2000, from INA, PREFERRED COMPONENTS INC and S.A. GEAR.

Listed part numbers: INA ZCC1062, PREFERRED COMPONENTS INC C7138 and S.A. GEAR C1062.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

5 Timing Chain & Component Kit parts for the 2001 Honda S2000 come from 3 brands — PREFERRED COMPONENTS INC, S.A. GEAR and ITM ENGINE COMPONENTS. The "Popular" part is ITM ENGINE COMPONENTS 05394383.

This group includes ITM ENGINE COMPONENTS 05394383, PREFERRED COMPONENTS INC TS23178 and PREFERRED COMPONENTS INC TS13178 and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts are listed for the 2001 Honda S2000, from S.A. GEAR, PREFERRED COMPONENTS INC and INA. S.A. GEAR 71118 carries the "Popular" badge.

Listed part numbers: S.A. GEAR 71118, INA ZG71118 and PREFERRED COMPONENTS INC R76025, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Timing Chain Tensioner parts for the 2001 Honda S2000 come from 4 brands — INA, S.A. GEAR, AISIN and 1 other brand. The "Popular" part is S.A. GEAR 91164.

Part numbers include S.A. GEAR 91164, AISIN BTH501 and INA ZC91164, among others listed above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SKF 17298.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

3 Timing Crank Sprocket parts for the 2001 Honda S2000 come from 3 brands — INA, PREFERRED COMPONENTS INC and S.A. GEAR.

Listed part numbers: INA ZSS1341, PREFERRED COMPONENTS INC G56311 and S.A. GEAR S1341.

This table covers the Timing Idler sprockets. Read more

One part is listed for the 2001 Honda S2000 — PREFERRED COMPONENTS INC G56312.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Valve Cover Gasket parts for the 2001 Honda S2000 come from 7 brands — APEX, MAHLE / CLEVITE, AJUSA and 4 other brands. The "Popular" part is APEX AVC147S.

This group includes APEX AVC147S, MAHLE / CLEVITE VS50639 and AJUSA 56029200 and the remaining parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

3 Valve Guide parts for the 2001 Honda S2000 come from 3 brands — QUALCAST, SBI and TOPLINE.

Listed part numbers: QUALCAST 303136, SBI 1403136 and TOPLINE VGH43.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

One part is listed for the 2001 Honda S2000 — MELLING VL1060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Valve Stem Seal parts for the 2001 Honda S2000 come from 10 brands — ELRING, ITM ENGINE COMPONENTS, SBI and 7 other brands. The "Popular" part is APEX AVS1003.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

6 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2001 Honda S2000 come from 6 brands — DORMAN, ULTRA-POWER, HOLSTEIN and 3 other brands. The "Popular" part is DORMAN 918079.

The Economy section: 5 options from DORMAN, ULTRA-POWER, HOLSTEIN and 2 other brands. DORMAN 918079 is listed in this group.

Standard Replacement: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS VVT280.

Listed part numbers: DORMAN 918079 and HOLSTEIN 2VTS0142, plus the other parts above.

This table covers the Variable Valve Timing (VVT) Solenoid filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

This group shows a single part: AJUSA 00976800C.