2002 Honda Civic Engine Parts

This table covers the chains that drive the balance shafts. Read more

7 Balance Shaft Chain parts are listed for the 2002 Honda Civic, from S.A. GEAR, MELLING and INA. MELLING 712F carries the "Popular" badge.

The Chain Only section lists 5 options from S.A. GEAR, MELLING and INA — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. MELLING 712F is listed in this group.

In the Kit grade, INA and MELLING supply 2 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is INA ZC76231.

This group includes MELLING 712F, S.A. GEAR C712F and INA ZCC712F and the remaining parts above.

This table covers the guides that keep the balance-shaft chain on its path. Read more

5 Balance Shaft Chain Guide parts are listed for the 2002 Honda Civic, from S.A. GEAR, BECK/ARNLEY, CLOYES and 2 other brands. S.A. GEAR 7518 carries the "Popular" badge.

Listed part numbers: S.A. GEAR 7518, BECK/ARNLEY 0241929 and CLOYES 95570, plus the other parts above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Balance Shaft Chain Tensioner parts for the 2002 Honda Civic come from 5 brands — MELLING, CLOYES, FVP and 2 other brands. The "Popular" part is MELLING BT5569.

Part numbers include MELLING BT5569 and CLOYES 95569, among others listed above.

This table covers the Balance Shaft sprockets. Read more

5 Balance Shaft Sprocket parts are listed for the 2002 Honda Civic, from MELLING, CLOYES, FVP and 2 other brands. MELLING S939 carries the "Popular" badge.

This group includes MELLING S939 and the remaining parts above.

This table covers the Camshaft caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

One part is listed for the 2002 Honda Civic — AJUSA 00794900.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Camshaft Seal parts for the 2002 Honda Civic come from 13 brands — CONTINENTAL, FEL-PRO, MAHLE / CLEVITE and 10 other brands. The "Popular" part is CONTINENTAL CS11429.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts for the 2002 Honda Civic come from 2 brands — APEX and VICTOR REINZ.

This group includes APEX ACP101 and VICTOR REINZ 711552200.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2002 Honda Civic — TOPLINE CRH46.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Connecting Rod Bearing parts are listed for the 2002 Honda Civic, from KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 2 other brands. ENGINETECH BB1536 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4541XP.

The Standard Replacement section lists 5 options from MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand — built to original-equipment specification. ENGINETECH BB1536 is listed in this group.

6 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

18 Conversion / Lower Gasket Set parts are listed for the 2002 Honda Civic, from FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 6 other brands. APEX ACS1043 carries the "Popular" badge.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 2002 Honda Civic — ENGINETECH 859000.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

15 Crankshaft Main Bearing parts for the 2002 Honda Civic come from 5 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE, TOPLINE and 2 other brands. The "Popular" part is KING ENGINE BEARINGS MB5259XPC.

The High Performance section: 3 options from KING ENGINE BEARINGS and MAHLE / CLEVITE. KING ENGINE BEARINGS MB5259XPC is listed in this group.

Standard Replacement: 12 parts, from MAHLE / CLEVITE, TOPLINE, KING ENGINE BEARINGS and 2 other brands. A representative part number is KING ENGINE BEARINGS MB5568AM.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

12 Crankshaft Repair Sleeve parts for the 2002 Honda Civic come from 7 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 4 other brands. The "Popular" part is BCA NS99315.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

55 Crankshaft Seal parts for the 2002 Honda Civic come from 19 brands — VICTOR REINZ, ELRING, APEX and 16 other brands. The "Popular" part is APEX ABS100. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the cylinder heads that close the top of the block. Read more

This group shows a single part: ENGINETECH CH1163R.

This table covers the bolts that clamp the cylinder head to the block. Read more

15 Cylinder Head Bolt parts are listed for the 2002 Honda Civic, from APEX, FEL-PRO, MAHLE / CLEVITE and 7 other brands. APEX AHB149 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

18 Cylinder Head Gasket parts are listed for the 2002 Honda Civic, from FEL-PRO, ELRING, MAHLE / CLEVITE and 6 other brands. FEL-PRO 26236PT carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

30 Cylinder Head Gasket Set parts are listed for the 2002 Honda Civic, from FEL-PRO, AJUSA, ITM ENGINE COMPONENTS and 9 other brands. APEX AHS1043 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MAHLE / CLEVITE B32774.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts are listed for the 2002 Honda Civic, from ENGINETECH and SBI.

Listed part numbers: ENGINETECH CHS1069 and SBI 2302189.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

One part is listed for the 2002 Honda Civic — TECHPRO HO1228118.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Engine Kit Gasket Set parts are listed for the 2002 Honda Civic, from AJUSA, ITM ENGINE COMPONENTS, ENGINETECH and 2 other brands. APEX AFS1043 carries the "Popular" badge.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2002 Honda Civic — ENGINETECH RCHO17P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

12 Exhaust Valve parts for the 2002 Honda Civic come from 6 brands — SBI, ITM ENGINE COMPONENTS, MELLING and 3 other brands. The "Popular" part is ENGINETECH EM1009.