2003 Honda CR-V Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts for the 2003 Honda CR-V come from 3 brands — SKF, TIMKEN and WJB / INMOTION PARTS.

Part numbers include SKF 13771A, TIMKEN SL260470 and WJB / INMOTION PARTS WS13771A.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

17 CV Axle parts for the 2003 Honda CR-V come from 4 brands — TRAKMOTIVE, GSP, TOP NOTCH and 1 other brand. The "Popular" part is GSP NCV36123.

This table covers the CV Axle Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2003 Honda CR-V — BECK/ARNLEY 0514288.

This table covers the CV Intermediate shafts. Read more

4 CV Intermediate Shaft parts are listed for the 2003 Honda CR-V, from TRAKMOTIVE, GSP and TOP NOTCH.

Listed part numbers: GSP NEX36008, TOP NOTCH TN50324IS and TRAKMOTIVE HO3555, plus the other parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

7 CV Joint Boot parts for the 2003 Honda CR-V come from 3 brands — BECK/ARNLEY, MEVOTECH and VAICO. The "Popular" part is BECK/ARNLEY 1032314.

Listed part numbers: BECK/ARNLEY 1032314, MEVOTECH DX610 and BECK/ARNLEY 1032927, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

6 Differential Carrier Bearing / Race parts for the 2003 Honda CR-V come from 4 brands — SKF, BCA, SCHAEFFLER and 1 other brand. The "Popular" part is BCA NB208S.

This group includes BCA NB208S, SKF BR95 and SCHAEFFLER 6208Z and the remaining parts above.

This table covers the Differential Carrier bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: BECK/ARNLEY 1042421.

This table covers the dampers that quiet the differential. Read more

3 Differential Dampener parts for the 2003 Honda CR-V come from 3 brands — DORMAN, SKP and ULTRA-POWER.

Part numbers include DORMAN 924441 and SKP SK924441, among others listed above.

This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Differential Mount parts are listed for the 2003 Honda CR-V, from DORMAN, SKP, AUTOTECNICA and 3 other brands. DORMAN 905539 carries the "Popular" badge.

This group includes DORMAN 905539, SKP SKMA65010 and AUTOTECNICA HA0420172 and the remaining parts above.

This table covers the bearings and races on the differential pinion. Read more

7 Differential Pinion Bearing / Race parts are listed for the 2003 Honda CR-V, from SCHAEFFLER, SKF, WJB / INMOTION PARTS and 1 other brand. ACDELCO A4 carries the "Popular" badge.

In the Economy grade, WJB / INMOTION PARTS supplies 1 part: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WTL44610.

The Standard Replacement section lists 6 options from SCHAEFFLER, SKF and ACDELCO — built to original-equipment specification. ACDELCO A4 is listed in this group.

Listed part numbers: ACDELCO A4, WJB / INMOTION PARTS WTL44610 and SKF BR4, plus the other parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Pinion Seal parts for the 2003 Honda CR-V come from 4 brands — NATIONAL, SCHAEFFLER, SKF and 1 other brand.

This group includes NATIONAL 711177, SCHAEFFLER SS2622 and SKF 15709 and the remaining parts above.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

2 Differential Repair Sleeve parts are listed for the 2003 Honda CR-V, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts are listed for the 2003 Honda CR-V, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 711087 and WJB / INMOTION PARTS WS711087.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

6 Drive Shaft parts are listed for the 2003 Honda CR-V, from SKP, WJB / INMOTION PARTS, CARDONE and 3 other brands. SKP SK936001 carries the "Popular" badge.

Part numbers include SKP SK936001, WJB / INMOTION PARTS WDS36001 and CARDONE 654000, among others listed above.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Drive Shaft Center Support Bearing parts are listed for the 2003 Honda CR-V, from SKP, DORMAN, WESTAR and 3 other brands. SKP SK934001 carries the "Popular" badge.

Economy: 3 parts, from SKP, DORMAN and WESTAR. A representative part number is SKP SK934001.

The Standard Replacement section: 3 options from ANCHOR, BECK/ARNLEY and DANA. ANCHOR 6069 is listed in this group.

Listed part numbers: SKP SK934001, DORMAN 934001 and WESTAR DS6069, plus the other parts above.

This table covers the seals at the Transfer Case Companion Flange. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Companion Flange Seal parts for the 2003 Honda CR-V come from 2 brands — ATP and PIONEER.

Part numbers include ATP HO36 and PIONEER 759072.