2003 Honda Insight Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts are listed for the 2003 Honda Insight, from ELRING and SCHAEFFLER.

This group includes ELRING 290710 and SCHAEFFLER SR4134.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 2003 Honda Insight come from 2 brands — AJUSA and TOPLINE.

This group includes AJUSA 54110900 and TOPLINE CBSH39.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts are listed for the 2003 Honda Insight, from BCA, SCHAEFFLER, SKF and 1 other brand.

Listed part numbers: BCA NS99254, SCHAEFFLER SR4134 and SKF 99254, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts are listed for the 2003 Honda Insight, from TIMKEN, FEL-PRO, APEX and 2 other brands. FEL-PRO TCS46175 carries the "Popular" badge.

This group includes FEL-PRO TCS46175, TIMKEN 473677 and APEX ATC1541 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts for the 2003 Honda Insight come from 3 brands — APEX, ITM ENGINE COMPONENTS and VICTOR REINZ.

Listed part numbers: APEX AHG141, ITM ENGINE COMPONENTS 0941414 and VICTOR REINZ 615371500.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 2003 Honda Insight come from 2 brands — APEX and ITM ENGINE COMPONENTS.

Part numbers include APEX AHS1041 and ITM ENGINE COMPONENTS 0911812.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2003 Honda Insight come from 3 brands — AJUSA, APEX and ITM ENGINE COMPONENTS.

Part numbers include AJUSA 50204100, APEX AFS1041 and ITM ENGINE COMPONENTS 0900819.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts for the 2003 Honda Insight come from 4 brands — AJUSA, APEX, MAHLE / CLEVITE and 1 other brand.

This group includes AJUSA 13166100, APEX AMS1410 and MAHLE / CLEVITE MS19866 and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

27 Oil parts are listed for the 2003 Honda Insight, from VALVOLINE, MOBIL, LIQUI MOLY and 1 other brand. LIQUI MOLY 2208 carries the "Popular" badge. Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 16 parts.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2003 Honda Insight come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts are listed for the 2003 Honda Insight, from DORMAN and SKP.

Listed part numbers: DORMAN 090033, DORMAN 090053 and DORMAN 092020, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2003 Honda Insight come from 4 brands — ULTRA-POWER, DORMAN, APEX and 1 other brand. The "Popular" part is DORMAN 095144.

This group includes DORMAN 095144, APEX ADP1909 and FEL-PRO 73346 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2003 Honda Insight, from DORMAN, BECK/ARNLEY, GATES and 2 other brands. DORMAN 80985 carries the "Popular" badge.

Part numbers include DORMAN 80985, BECK/ARNLEY 0160142 and GATES 31284, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts are listed for the 2003 Honda Insight, from BOSCH, WIX, FAMOUS BRAND and 12 other brands. BOSCH 72230WS carries the "Popular" badge.

In the Economy grade, BOSCH, FAMOUS BRAND, FRAM and 2 other brands supply 5 parts: the catalog's value-priced group. A representative part number is BOSCH 72230WS.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1110A.

The Standard Replacement section lists 10 options from BOSCH, MOTORCRAFT, ACKOJA and 7 other brands — built to original-equipment specification. BOSCH 3300 is listed in this group.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pan Gasket parts are listed for the 2003 Honda Insight, from AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 59013900 and MAHLE / CLEVITE OS32414.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2003 Honda Insight — FEL-PRO 73196.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

7 Oil Pump Repair Sleeve parts for the 2003 Honda Insight come from 6 brands — SCHAEFFLER, NATIONAL, SKF and 3 other brands. The "Popular" part is NATIONAL 99157.

This group includes NATIONAL 99157, SKF 99163 and BCA NS99157 and the remaining parts above.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Oil Pump Seal parts for the 2003 Honda Insight come from 5 brands — NATIONAL, SCHAEFFLER, SKF and 2 other brands. The "Popular" part is NATIONAL 473677.

Listed part numbers: NATIONAL 473677, SCHAEFFLER SS2641 and SKF 16147, plus the other parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

This group shows a single part: PREFERRED COMPONENTS INC C7128.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

PREFERRED COMPONENTS INC supplies both parts for the 2003 Honda Insight.

Listed part numbers: PREFERRED COMPONENTS INC TS21850 and PREFERRED COMPONENTS INC TS11850.

This table covers the guides and dampers that keep the timing chain on its path. Read more

2 Timing Chain Guide / Damper parts for the 2003 Honda Insight come from PREFERRED COMPONENTS INC.

Part numbers include PREFERRED COMPONENTS INC R76035 and PREFERRED COMPONENTS INC R76036.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2003 Honda Insight — PREFERRED COMPONENTS INC T66344.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

One part is listed for the 2003 Honda Insight — SCHAEFFLER SR3487.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Timing Cover Seal parts are listed for the 2003 Honda Insight, from ITM ENGINE COMPONENTS, MAHLE / CLEVITE, SCHAEFFLER and 1 other brand.

Part numbers include ITM ENGINE COMPONENTS 1501528, MAHLE / CLEVITE 67932 and SCHAEFFLER SS5126, among others listed above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Valve Cover Gasket parts are listed for the 2003 Honda Insight, from BECK/ARNLEY, MAHLE / CLEVITE, AJUSA and 3 other brands. BECK/ARNLEY 0361601 carries the "Popular" badge.

This group includes BECK/ARNLEY 0361601, MAHLE / CLEVITE VS50638 and AJUSA 11086200 and the remaining parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

3 Valve Guide parts are listed for the 2003 Honda Insight, from QUALCAST, SBI and TOPLINE.

Listed part numbers: QUALCAST 308158, SBI 1408158 and TOPLINE IVGH21.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts for the 2003 Honda Insight come from 2 brands — QUALCAST and SBI.

This group includes QUALCAST 345008 and SBI 1211060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Valve Stem Seal parts are listed for the 2003 Honda Insight, from ELRING, SBI, VICTOR REINZ and 5 other brands. APEX AVS1003 carries the "Popular" badge.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

5 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2003 Honda Insight, from ULTRA-POWER, DORMAN, HOLSTEIN and 2 other brands. ULTRA-POWER 918068 carries the "Popular" badge.

Economy: 4 parts, from ULTRA-POWER, DORMAN, HOLSTEIN and 1 other brand. A representative part number is ULTRA-POWER 918068.

The Standard Replacement section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS VVT226 is listed in this group.

Part numbers include ULTRA-POWER 918068 and HOLSTEIN 2VTS0151, among others listed above.

This table covers the Variable Valve Timing (VVT) Solenoid filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

7 Variable Valve Timing (VVT) Solenoid Filter parts are listed for the 2003 Honda Insight, from STANDARD MOTOR PRODUCTS, FEL-PRO, GATES and 3 other brands. FEL-PRO ES73238 carries the "Popular" badge.

Part numbers include FEL-PRO ES73238, GATES VVS901 and AJUSA 00961000, among others listed above.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 519600.