2003 Honda Pilot Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts are listed for the 2003 Honda Pilot, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts are listed for the 2003 Honda Pilot, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 10 other brands. FEL-PRO TCS46025 carries the "Popular" badge.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts for the 2003 Honda Pilot come from 5 brands — KING ENGINE BEARINGS, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH BB1538.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6837XP is listed in this group.

In the Standard Replacement grade, ENGINETECH, KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1538.

Part numbers include ENGINETECH BB1538, KING ENGINE BEARINGS CR6837XP and KING ENGINE BEARINGS CR6837SM, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts for the 2003 Honda Pilot come from 8 brands — APEX, ENGINETECH, AJUSA and 5 other brands. The "Popular" part is APEX ACS1040.

Part numbers include APEX ACS1040, ENGINETECH HO35CSA and AJUSA 54094400, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 2003 Honda Pilot, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH BC1537 carries the "Popular" badge.

Listed part numbers: ENGINETECH BC1537, MAHLE / CLEVITE MS2335A and ITM ENGINE COMPONENTS 4M1201, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts are listed for the 2003 Honda Pilot, from SCHAEFFLER, SKF, TIMKEN and 1 other brand.

This group includes SCHAEFFLER SR4784, SKF 99313 and TIMKEN KWK99315 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

23 Crankshaft Seal parts are listed for the 2003 Honda Pilot, from ELRING, APEX, SKF and 13 other brands. APEX ABS128 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts for the 2003 Honda Pilot come from 7 brands — ELRING, VICTOR REINZ, FEL-PRO and 4 other brands. The "Popular" part is FEL-PRO ES71331.

Listed part numbers: FEL-PRO ES71331, MAHLE / CLEVITE GS33569 and APEX AHB140, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts for the 2003 Honda Pilot come from 8 brands — APEX, FEL-PRO, AJUSA and 5 other brands. The "Popular" part is APEX AHG142.

This group includes APEX AHG142, FEL-PRO 26260PT and AJUSA 10125500 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Cylinder Head Gasket Set parts for the 2003 Honda Pilot come from 7 brands — ENGINETECH, FEL-PRO, APEX and 4 other brands. The "Popular" part is APEX AHS1200.

Part numbers include APEX AHS1200, ENGINETECH HO35HSB and AJUSA 52167100, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2003 Honda Pilot.

Listed part numbers: KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO HO1228144.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts for the 2003 Honda Pilot come from 5 brands — ENGINETECH, AJUSA, APEX and 2 other brands. The "Popular" part is ENGINETECH HO35K2.

Part numbers include ENGINETECH HO35K2, AJUSA 50181100 and APEX AFS1200, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts are listed for the 2003 Honda Pilot, from MELLING, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 3 other brands. ITM ENGINE COMPONENTS RX9599 carries the "Popular" badge.

Part numbers include ITM ENGINE COMPONENTS RX9599, MELLING V0779 and MAHLE / CLEVITE 2114674, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 2003 Honda Pilot come from 4 brands — SKP, ATP, DAYCO and 1 other brand.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594300 is listed in this group.

Standard Replacement: 3 parts, from ATP, DAYCO and PIONEER. A representative part number is ATP 102275.

This group includes SKP SK594300, ATP 102275 and DAYCO PB1575N and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts for the 2003 Honda Pilot come from 5 brands — FEL-PRO, APEX, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is FEL-PRO MS96427.

This group includes FEL-PRO MS96427, FEL-PRO MS963843 and APEX AMS1420 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Intake Plenum Gasket parts are listed for the 2003 Honda Pilot, from MAHLE / CLEVITE, APEX, VICTOR REINZ and 3 other brands. FEL-PRO MS96384 carries the "Popular" badge.

Part numbers include FEL-PRO MS96384, MAHLE / CLEVITE MS19469 and AJUSA 00855600, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts are listed for the 2003 Honda Pilot, from MELLING, SBI, ITM ENGINE COMPONENTS and 3 other brands. MELLING V0778 carries the "Popular" badge.

Listed part numbers: MELLING V0778, SBI 10778 and ITM ENGINE COMPONENTS RV9599, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

16 Motor Mount parts are listed for the 2003 Honda Pilot, from SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 3 other brands. SKP SKM9441 carries the "Popular" badge.

Economy: 3 parts, from SKP. A representative part number is SKP SKM9441.

The Standard Replacement section: 13 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 2 other brands. ANCHOR 9389 is listed in this group.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2003 Honda Pilot — TECHPRO HO4141100.

This table covers the Motor Mount kits. Read more

One part is listed for the 2003 Honda Pilot — ANCHOR 300276.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

36 Oil parts are listed for the 2003 Honda Pilot, from VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands. LIQUI MOLY 2259 carries the "Popular" badge. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by VALVOLINE, LIQUI MOLY, MOBIL and 2 other brands.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2003 Honda Pilot come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts are listed for the 2003 Honda Pilot, from DORMAN, ELRING, AGS and 3 other brands. DORMAN 090033 carries the "Popular" badge.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2003 Honda Pilot come from 6 brands — DORMAN, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is DORMAN 095144.

This group includes DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2003 Honda Pilot, from DORMAN, BECK/ARNLEY, GATES and 2 other brands. DORMAN 80985 carries the "Popular" badge.

Part numbers include DORMAN 80985, BECK/ARNLEY 0160142 and GATES 31284, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts are listed for the 2003 Honda Pilot, from BOSCH, VARIOUS MFR, WIX and 13 other brands. MOBIL M1110A carries the "Popular" badge.

Economy: 6 parts, from BOSCH, FRAM, FVP and 3 other brands. A representative part number is BOSCH 72228WS.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1110A.

The Standard Replacement section: 12 options from ACDELCO, BOSCH, WIX and 8 other brands. BOSCH 3312 is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts for the 2003 Honda Pilot come from 2 brands — APEX and FEL-PRO.

Part numbers include APEX AOM6025 and FEL-PRO 73040.

This table covers the Oil Filter Support tubes. Read more

This group shows a single part: AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts for the 2003 Honda Pilot come from 5 brands — ULTRA-POWER, AUTOTECNICA, DORMAN and 2 other brands. The "Popular" part is ULTRA-POWER 264412.

This group includes ULTRA-POWER 264412 and AUTOTECNICA HA1415493 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2003 Honda Pilot — VICTOR REINZ 703141410.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2003 Honda Pilot — FEL-PRO 73196.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

5 Oil Pump parts are listed for the 2003 Honda Pilot, from SKP, MELLING, ENGINETECH and 2 other brands. MELLING M516 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKPM395.

The Standard Replacement section: 4 options from MELLING, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. MELLING M516 is listed in this group.

Listed part numbers: MELLING M516, SKP SKPM395 and ENGINETECH EP038A, plus the other parts above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts for the 2003 Honda Pilot come from 2 brands — ELRING and MAHLE / CLEVITE.

Part numbers include ELRING 967650 and MAHLE / CLEVITE JV5083.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

This group shows a single part: SKF 99138.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Oil Pump Seal parts for the 2003 Honda Pilot come from 6 brands — SKF, TIMKEN, BCA and 3 other brands. The "Popular" part is SKF 13907.

Part numbers include SKF 13907, TIMKEN 711181 and BCA NS711181, among others listed above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

4 Piston parts for the 2003 Honda Pilot come from 3 brands — MAHLE / CLEVITE, ENGINETECH and TOPLINE.

In the Premium grade, MAHLE / CLEVITE and ENGINETECH supply 3 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH P4836.

Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE PAH38L.

This group includes ENGINETECH P4836, MAHLE / CLEVITE 2243917WR and MAHLE / CLEVITE 2243917 and the remaining parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

4 Piston Ring parts for the 2003 Honda Pilot come from 4 brands — ENGINETECH, HASTINGS MANUFACTURING, ITM ENGINE COMPONENTS and 1 other brand.

Premium: 1 part, from ENGINETECH. A representative part number is ENGINETECH S89416.

Standard Replacement: 3 parts, from HASTINGS MANUFACTURING, ITM ENGINE COMPONENTS and TOPLINE. A representative part number is HASTINGS MANUFACTURING 2C4972.

Part numbers include ENGINETECH S89416, HASTINGS MANUFACTURING 2C4972 and ITM ENGINE COMPONENTS 0216716, among others listed above.

This table covers the Thrust washers. Read more

4 Thrust Washer parts are listed for the 2003 Honda Pilot, from ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 1 other brand.

Part numbers include ENGINETECH TW1537, ITM ENGINE COMPONENTS 1T4450 and KING ENGINE BEARINGS TW1015SI, among others listed above.