2003 Honda S2000 Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: FOUR SEASONS 70066.

This table covers the harness connectors at the A/C Compressor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2965.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2003 Honda S2000 — STANDARD MOTOR PRODUCTS S3230.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2926.

This table covers the harness connectors at the Accessory Power Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Accessory Power Relay Connector parts for the 2003 Honda S2000 come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the Air Intake / Charge Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2003 Honda S2000 — STANDARD MOTOR PRODUCTS S2543.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3205.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Blower Motor Control Module / Resistor Connector parts are listed for the 2003 Honda S2000, from FOUR SEASONS, HOLSTEIN and STANDARD MOTOR PRODUCTS.

Listed part numbers: FOUR SEASONS 70059, HOLSTEIN 2HAR0005 and STANDARD MOTOR PRODUCTS S2447.

This table covers the harness connectors at the Blower Motor Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2003 Honda S2000 — FOUR SEASONS 70059.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Brake Light Switch Connector parts are listed for the 2003 Honda S2000, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS HP4145, STANDARD MOTOR PRODUCTS S1519 and UNITED MOTOR PRODUCTS CON24, plus the other parts above.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2908.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Crankshaft Position Sensor Connector parts for the 2003 Honda S2000 come from 2 brands — HOLSTEIN and STANDARD MOTOR PRODUCTS.

Listed part numbers: HOLSTEIN 2HAR0061 and STANDARD MOTOR PRODUCTS S2854.

This table covers the harness connectors at the Door Lock Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Door Lock Actuator Connector parts for the 2003 Honda S2000 come from 2 brands — STANDARD MOTOR PRODUCTS and HOLSTEIN.

This group includes HOLSTEIN 2HAR0061, STANDARD MOTOR PRODUCTS S2854 and STANDARD MOTOR PRODUCTS S973.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Injector Connector parts for the 2003 Honda S2000 come from 3 brands — GB REMANUFACTURING, STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include GB REMANUFACTURING 5193, STANDARD MOTOR PRODUCTS S2291 and WELLS 1P4067.

This table covers the harness connectors at the Fuel Pump / Circuit Opening Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2003 Honda S2000 — GMB 5001002.

This table covers the harness connectors at the Fuel Tank Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2003 Honda S2000 — STANDARD MOTOR PRODUCTS S2547.

This table covers the harness connectors at the Headlamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Headlamp Relay Connector parts are listed for the 2003 Honda S2000, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2003 Honda S2000 — STANDARD MOTOR PRODUCTS LWH110.

This table covers the harness connectors at the Horn Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Horn Relay Connector parts for the 2003 Honda S2000 come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the HVAC Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 HVAC Relay Connector parts are listed for the 2003 Honda S2000, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the Idle Air Control (IAC) Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2003 Honda S2000 — STANDARD MOTOR PRODUCTS S2823.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Ignition Coil Connector parts for the 2003 Honda S2000 come from 4 brands — STANDARD MOTOR PRODUCTS, ULTRA-POWER, UNITED MOTOR PRODUCTS and 1 other brand.

This group includes STANDARD MOTOR PRODUCTS S2526 and UNITED MOTOR PRODUCTS CON207 and the remaining parts above.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3085.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2547.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2003 Honda S2000 — STANDARD MOTOR PRODUCTS S2543.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1474.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oxygen (O2) Sensor Connector parts for the 2003 Honda S2000 come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S2857 and STANDARD MOTOR PRODUCTS S3096.

This table covers the harness connectors at the Radiator Fan Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Radiator Fan Relay Connector parts for the 2003 Honda S2000 come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the Radiator Fan Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2003 Honda S2000 — STANDARD MOTOR PRODUCTS S2543.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies the 4 Radio Connector parts for the 2003 Honda S2000.

Listed part numbers: METRA 701721, METRA 711721 and METRA 701721T, plus the other parts above.

This table covers the harness connectors at the Speaker. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2003 Honda S2000 — METRA 727800.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2003 Honda S2000 — STANDARD MOTOR PRODUCTS S2908.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2543.

This table covers the Trailer Wire converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

One part is listed for the 2003 Honda S2000 — CURT 55151.

This table covers the harness connectors at the Turn Signal Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Turn Signal Relay Connector parts for the 2003 Honda S2000 come from 2 brands — ROSTRA and WELLS.

Part numbers include ROSTRA 610893 and WELLS 1P1206.

This table covers the harness connectors at the Voltage Regulator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2003 Honda S2000 — STANDARD MOTOR PRODUCTS S2548.