2004 Honda CR-V Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts are listed for the 2004 Honda CR-V, from SKF, TIMKEN and WJB / INMOTION PARTS.

Listed part numbers: SKF 13771A, TIMKEN SL260470 and WJB / INMOTION PARTS WS13771A.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

17 CV Axle parts are listed for the 2004 Honda CR-V, from TRAKMOTIVE, GSP, TOP NOTCH and 1 other brand. GSP NCV36123 carries the "Popular" badge.

This table covers the CV Axle Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: BECK/ARNLEY 0514288.

This table covers the CV Intermediate shafts. Read more

4 CV Intermediate Shaft parts for the 2004 Honda CR-V come from 3 brands — TRAKMOTIVE, GSP and TOP NOTCH.

This group includes GSP NEX36008, TOP NOTCH TN50324IS and TRAKMOTIVE HO3555 and the remaining parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

7 CV Joint Boot parts are listed for the 2004 Honda CR-V, from BECK/ARNLEY, MEVOTECH and VAICO. BECK/ARNLEY 1032314 carries the "Popular" badge.

This group includes BECK/ARNLEY 1032314, MEVOTECH DX610 and BECK/ARNLEY 1032927 and the remaining parts above.

This table covers the bearings and races that support the differential carrier. Read more

6 Differential Carrier Bearing / Race parts are listed for the 2004 Honda CR-V, from SKF, BCA, SCHAEFFLER and 1 other brand. BCA NB208S carries the "Popular" badge.

This group includes BCA NB208S, SKF BR95 and SCHAEFFLER 6208Z and the remaining parts above.

This table covers the Differential Carrier bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2004 Honda CR-V — BECK/ARNLEY 1042421.

This table covers the dampers that quiet the differential. Read more

3 Differential Dampener parts are listed for the 2004 Honda CR-V, from DORMAN, SKP and ULTRA-POWER.

Listed part numbers: DORMAN 924441 and SKP SK924441, plus the other parts above.

This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Differential Mount parts for the 2004 Honda CR-V come from 6 brands — DORMAN, SKP, AUTOTECNICA and 3 other brands. The "Popular" part is DORMAN 905539.

Listed part numbers: DORMAN 905539, SKP SKMA65010 and AUTOTECNICA HA0420172, plus the other parts above.

This table covers the bearings and races on the differential pinion. Read more

7 Differential Pinion Bearing / Race parts for the 2004 Honda CR-V come from 4 brands — SCHAEFFLER, SKF, WJB / INMOTION PARTS and 1 other brand. The "Popular" part is ACDELCO A4.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTL44610 is listed in this group.

In the Standard Replacement grade, SCHAEFFLER, SKF and ACDELCO supply 6 parts: built to original-equipment specification. A representative part number is ACDELCO A4.

This group includes ACDELCO A4, WJB / INMOTION PARTS WTL44610 and SKF BR4 and the remaining parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Pinion Seal parts are listed for the 2004 Honda CR-V, from NATIONAL, SCHAEFFLER, SKF and 1 other brand.

This group includes NATIONAL 711177, SCHAEFFLER SS2622 and SKF 15709 and the remaining parts above.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

2 Differential Repair Sleeve parts for the 2004 Honda CR-V come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts for the 2004 Honda CR-V come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 711087 and WJB / INMOTION PARTS WS711087.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

6 Drive Shaft parts for the 2004 Honda CR-V come from 6 brands — SKP, WJB / INMOTION PARTS, CARDONE and 3 other brands. The "Popular" part is SKP SK936001.

Listed part numbers: SKP SK936001, WJB / INMOTION PARTS WDS36001 and CARDONE 654000, plus the other parts above.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Drive Shaft Center Support Bearing parts for the 2004 Honda CR-V come from 6 brands — SKP, DORMAN, WESTAR and 3 other brands. The "Popular" part is SKP SK934001.

The Economy section: 3 options from SKP, DORMAN and WESTAR. SKP SK934001 is listed in this group.

Standard Replacement: 3 parts, from ANCHOR, BECK/ARNLEY and DANA. A representative part number is ANCHOR 6069.

Listed part numbers: SKP SK934001, DORMAN 934001 and WESTAR DS6069, plus the other parts above.

This table covers the seals at the Transfer Case Companion Flange. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Companion Flange Seal parts are listed for the 2004 Honda CR-V, from ATP and PIONEER.

Listed part numbers: ATP HO36 and PIONEER 759072.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Transfer Case Input Shaft Bearing parts are listed for the 2004 Honda CR-V, from SKF, SCHAEFFLER and WJB / INMOTION PARTS. SKF BR4 carries the "Popular" badge.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTL44610.

The Standard Replacement section: 6 options from SKF and SCHAEFFLER. SKF BR4 is listed in this group.

This group includes SKF BR4, WJB / INMOTION PARTS WTL44610 and SKF 32008XVP and the remaining parts above.

This table covers the Transfer Case mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Transfer Case Mount parts for the 2004 Honda CR-V come from 2 brands — ANCHOR and PIONEER.

Part numbers include ANCHOR 9879 and PIONEER 629879.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Output Shaft Bearing parts for the 2004 Honda CR-V come from 4 brands — SKF, SCHAEFFLER, WJB / INMOTION PARTS and 1 other brand. The "Popular" part is ACDELCO A4.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTL44610 is listed in this group.

Standard Replacement: 5 parts, from SKF, SCHAEFFLER and ACDELCO. A representative part number is ACDELCO A4.

This group includes ACDELCO A4, WJB / INMOTION PARTS WTL44610 and SKF BR4 and the remaining parts above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts are listed for the 2004 Honda CR-V, from SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SS2622 and SKF 15709.