2006 Honda Odyssey Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts for the 2006 Honda Odyssey come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts for the 2006 Honda Odyssey come from 13 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 10 other brands. The "Popular" part is FEL-PRO TCS46025.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2006 Honda Odyssey — TOPLINE CRH38Z.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts are listed for the 2006 Honda Odyssey, from KING ENGINE BEARINGS, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. ENGINETECH BB1538 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6837XP.

The Standard Replacement section lists 5 options from ENGINETECH, KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and 2 other brands — built to original-equipment specification. ENGINETECH BB1538 is listed in this group.

Part numbers include ENGINETECH BB1538, KING ENGINE BEARINGS CR6837XP and KING ENGINE BEARINGS CR6837SM, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 2006 Honda Odyssey, from ENGINETECH, FEL-PRO, AJUSA and 3 other brands. ENGINETECH HO35CSA carries the "Popular" badge.

Part numbers include ENGINETECH HO35CSA, FEL-PRO CS26265 and AJUSA 54220400, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2006 Honda Odyssey come from 4 brands — TOPLINE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. The "Popular" part is ENGINETECH BC1537.

Part numbers include ENGINETECH BC1537, KING ENGINE BEARINGS MB4508SI and MAHLE / CLEVITE MS2335A, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2006 Honda Odyssey come from 3 brands — SCHAEFFLER, SKF and WJB / INMOTION PARTS.

This group includes SCHAEFFLER SR3486, SKF 99313 and WJB / INMOTION PARTS WS99317.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts for the 2006 Honda Odyssey come from 13 brands — ELRING, MAHLE / CLEVITE, TIMKEN and 10 other brands. The "Popular" part is ELRING 590797.

This table covers the cylinder heads that close the top of the block. Read more

This group shows a single part: CYLINDER HEAD EXPRESS HO3507.

This table covers the bolts that clamp the cylinder head to the block. Read more

14 Cylinder Head Bolt parts are listed for the 2006 Honda Odyssey, from VICTOR REINZ, ENGINETECH, FEL-PRO and 5 other brands. ENGINETECH HB271 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Cylinder Head Gasket parts are listed for the 2006 Honda Odyssey, from AJUSA, FEL-PRO, ULTRA-POWER and 6 other brands. FEL-PRO 26265PT carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

21 Cylinder Head Gasket Set parts are listed for the 2006 Honda Odyssey, from ENGINETECH, FEL-PRO, APEX and 5 other brands. APEX AHS1204 carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 2006 Honda Odyssey — SBI 2302172.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2006 Honda Odyssey come from KAT'S HEATERS.

Part numbers include KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

2 Engine Cover parts are listed for the 2006 Honda Odyssey, from TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO HO1228104, among others listed above.

This table covers the Engine Cover grommets. Read more

This group shows a single part: DORMAN 49932.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 2006 Honda Odyssey, from ENGINETECH, AJUSA, ITM ENGINE COMPONENTS and 1 other brand. ENGINETECH HO35K3 carries the "Popular" badge.

Part numbers include ENGINETECH HO35K3, AJUSA 50390600 and ENGINETECH HO35K4, among others listed above.

This table covers the Engine rebuild kits. Read more

ENGINETECH supplies both parts for the 2006 Honda Odyssey.

Listed part numbers: ENGINETECH RCHO35AP and ENGINETECH RCHO35P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts for the 2006 Honda Odyssey come from 6 brands — MELLING, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 3 other brands. The "Popular" part is ITM ENGINE COMPONENTS RX9599.

Listed part numbers: ITM ENGINE COMPONENTS RX9599, MELLING V0779 and MAHLE / CLEVITE 2114674, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 2006 Honda Odyssey, from SKP, ATP, DAYCO and 2 other brands. ATP 102235 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594267.

The Standard Replacement section: 4 options from ATP, DAYCO, DORMAN and 1 other brand. ATP 102235 is listed in this group.

This group includes ATP 102235, SKP SK594267 and DAYCO PB1545N and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts are listed for the 2006 Honda Odyssey, from AJUSA, APEX, BECK/ARNLEY and 3 other brands. APEX AMS1572 carries the "Popular" badge.

This group includes APEX AMS1572, BECK/ARNLEY 0376239 and AJUSA 13208600 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Plenum Gasket parts for the 2006 Honda Odyssey come from 6 brands — BECK/ARNLEY, FEL-PRO, MAHLE / CLEVITE and 3 other brands. The "Popular" part is FEL-PRO MS96410.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts for the 2006 Honda Odyssey come from 6 brands — MELLING, SBI, ITM ENGINE COMPONENTS and 3 other brands. The "Popular" part is MELLING V0778.

This group includes MELLING V0778, SBI 10778 and ITM ENGINE COMPONENTS RV9599 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

33 Motor Mount parts for the 2006 Honda Odyssey come from 7 brands — SKP, ANCHOR, BECK/ARNLEY and 4 other brands. The "Popular" part is SKP SKM9247. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 26 parts.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts for the 2006 Honda Odyssey come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.

This group includes ANCHOR 300331, ANCHOR 300334 and DEA / MARMON RIDE CONTROL MK5506.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

41 Oil parts for the 2006 Honda Odyssey come from 5 brands — VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands. The "Popular" part is LIQUI MOLY 2259. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 22 parts from VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2006 Honda Odyssey.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: DORMAN 917387.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts for the 2006 Honda Odyssey come from 6 brands — DORMAN, ELRING, AGS and 3 other brands. The "Popular" part is DORMAN 090033.

Listed part numbers: DORMAN 090033, DORMAN 090053 and AGS ODP00007, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2006 Honda Odyssey, from DORMAN, APEX, ELRING and 2 other brands. DORMAN 095144 carries the "Popular" badge.

This group includes DORMAN 095144, APEX ADP1909 and ELRING 243600 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2006 Honda Odyssey come from 5 brands — DORMAN, BECK/ARNLEY, GATES and 2 other brands. The "Popular" part is DORMAN 80985.

Listed part numbers: DORMAN 80985, BECK/ARNLEY 0160142 and GATES 31284, plus the other parts above.