2007 Honda CR-V Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts for the 2007 Honda CR-V come from 3 brands — SKF, TIMKEN and WJB / INMOTION PARTS.

This group includes SKF 13771A, TIMKEN SL260470 and WJB / INMOTION PARTS WS13771A.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

18 CV Axle parts for the 2007 Honda CR-V come from 6 brands — TRAKMOTIVE, GSP, TOP NOTCH and 3 other brands. The "Popular" part is GSP NCV36574.

This table covers the CV Axle Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2007 Honda CR-V — BECK/ARNLEY 0514288.

This table covers the CV Intermediate shafts. Read more

2 CV Intermediate Shaft parts are listed for the 2007 Honda CR-V, from TOP NOTCH and TRAKMOTIVE.

Part numbers include TOP NOTCH TN50307IS and TRAKMOTIVE HO3561.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

6 CV Joint Boot parts for the 2007 Honda CR-V come from 3 brands — MEVOTECH, BECK/ARNLEY and GKN. The "Popular" part is MEVOTECH DX610.

Listed part numbers: MEVOTECH DX610, BECK/ARNLEY 1032314 and BECK/ARNLEY 1032927, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

4 Differential Carrier Bearing / Race parts for the 2007 Honda CR-V come from 2 brands — SKF and SCHAEFFLER.

Listed part numbers: SCHAEFFLER 6208Z, SKF BR155 and SKF 6208ZJ, plus the other parts above.

This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Differential Mount parts are listed for the 2007 Honda CR-V, from DORMAN, SKP, AUTOTECNICA and 3 other brands. DORMAN 905539 carries the "Popular" badge.

Listed part numbers: DORMAN 905539, SKP SKMA65010 and AUTOTECNICA HA0420172, plus the other parts above.

This table covers the bearings and races on the differential pinion. Read more

6 Differential Pinion Bearing / Race parts are listed for the 2007 Honda CR-V, from SCHAEFFLER, SKF and WJB / INMOTION PARTS. SKF L44610VP carries the "Popular" badge.

In the Economy grade, WJB / INMOTION PARTS supplies 1 part: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WTL44610.

The Standard Replacement section lists 5 options from SCHAEFFLER and SKF — built to original-equipment specification. SKF L44610VP is listed in this group.

This group includes SKF L44610VP, WJB / INMOTION PARTS WTL44610 and SKF BR4 and the remaining parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Pinion Seal parts for the 2007 Honda CR-V come from 4 brands — NATIONAL, SCHAEFFLER, SKF and 1 other brand.

This group includes NATIONAL 711177, SCHAEFFLER SS2622 and SKF 15709 and the remaining parts above.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

2 Differential Repair Sleeve parts are listed for the 2007 Honda CR-V, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts are listed for the 2007 Honda CR-V, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 711087 and WJB / INMOTION PARTS WS711087.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

7 Drive Shaft parts are listed for the 2007 Honda CR-V, from SKP, WJB / INMOTION PARTS, CARDONE and 4 other brands. SKP SK654001 carries the "Popular" badge.

This group includes SKP SK654001, WJB / INMOTION PARTS WDS36002 and CARDONE 654001 and the remaining parts above.

This table covers the seals at the Transfer Case Companion Flange. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Companion Flange Seal parts for the 2007 Honda CR-V come from 2 brands — ATP and PIONEER.

This group includes ATP HO36 and PIONEER 759072.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Input Shaft Bearing parts for the 2007 Honda CR-V come from 3 brands — SKF, SCHAEFFLER and WJB / INMOTION PARTS. The "Popular" part is SKF L44610VP.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTL44610 is listed in this group.

Standard Replacement: 5 parts, from SKF and SCHAEFFLER. A representative part number is SKF L44610VP.

Listed part numbers: SKF L44610VP, WJB / INMOTION PARTS WTL44610 and SKF BR4, plus the other parts above.

This table covers the Transfer Case mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Transfer Case Mount parts are listed for the 2007 Honda CR-V, from ANCHOR and PIONEER.

This group includes ANCHOR 9879 and PIONEER 629879.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Output Shaft Bearing parts are listed for the 2007 Honda CR-V, from SKF, SCHAEFFLER, WJB / INMOTION PARTS and 1 other brand. ACDELCO A4 carries the "Popular" badge.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTL44610.

The Standard Replacement section: 5 options from SKF, SCHAEFFLER and ACDELCO. ACDELCO A4 is listed in this group.

Listed part numbers: ACDELCO A4, WJB / INMOTION PARTS WTL44610 and SKF BR4, plus the other parts above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts for the 2007 Honda CR-V come from 2 brands — SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SS2622 and SKF 15709.