2007 Honda Odyssey Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts are listed for the 2007 Honda Odyssey, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts are listed for the 2007 Honda Odyssey, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 10 other brands. FEL-PRO TCS46025 carries the "Popular" badge.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRH38Z.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts for the 2007 Honda Odyssey come from 5 brands — KING ENGINE BEARINGS, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH BB1538.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6837XP is listed in this group.

In the Standard Replacement grade, ENGINETECH, KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1538.

Part numbers include ENGINETECH BB1538, KING ENGINE BEARINGS CR6837XP and KING ENGINE BEARINGS CR6837SM, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts for the 2007 Honda Odyssey come from 7 brands — ENGINETECH, FEL-PRO, AJUSA and 4 other brands. The "Popular" part is ENGINETECH HO35CSA.

Listed part numbers: ENGINETECH HO35CSA, FEL-PRO CS26265 and AJUSA 54220400, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 2007 Honda Odyssey, from TOPLINE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. ENGINETECH BC1537 carries the "Popular" badge.

Part numbers include ENGINETECH BC1537, KING ENGINE BEARINGS MB4508SI and MAHLE / CLEVITE MS2335A, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 2007 Honda Odyssey, from SCHAEFFLER, SKF and WJB / INMOTION PARTS.

Part numbers include SCHAEFFLER SR3486, SKF 99313 and WJB / INMOTION PARTS WS99317.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts are listed for the 2007 Honda Odyssey, from ELRING, MAHLE / CLEVITE, TIMKEN and 10 other brands. ELRING 590797 carries the "Popular" badge.

This table covers the cylinder heads that close the top of the block. Read more

One part is listed for the 2007 Honda Odyssey — CYLINDER HEAD EXPRESS HO3507.

This table covers the bolts that clamp the cylinder head to the block. Read more

14 Cylinder Head Bolt parts for the 2007 Honda Odyssey come from 8 brands — VICTOR REINZ, ENGINETECH, FEL-PRO and 5 other brands. The "Popular" part is ENGINETECH HB271.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Cylinder Head Gasket parts for the 2007 Honda Odyssey come from 9 brands — AJUSA, FEL-PRO, ULTRA-POWER and 6 other brands. The "Popular" part is FEL-PRO 26265PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

21 Cylinder Head Gasket Set parts for the 2007 Honda Odyssey come from 8 brands — ENGINETECH, FEL-PRO, APEX and 5 other brands. The "Popular" part is APEX AHS1204.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302172.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2007 Honda Odyssey.

Part numbers include KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2007 Honda Odyssey come from 2 brands — TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO HO1228104, among others listed above.

This table covers the Engine Cover grommets. Read more

One part is listed for the 2007 Honda Odyssey — DORMAN 49932.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts for the 2007 Honda Odyssey come from 4 brands — ENGINETECH, AJUSA, ITM ENGINE COMPONENTS and 1 other brand. The "Popular" part is ENGINETECH HO35K3.

Part numbers include ENGINETECH HO35K3, AJUSA 50390600 and ENGINETECH HO35K4, among others listed above.

This table covers the Engine rebuild kits. Read more

2 Engine Rebuild Kit parts for the 2007 Honda Odyssey come from ENGINETECH.

This group includes ENGINETECH RCHO35AP and ENGINETECH RCHO35P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts are listed for the 2007 Honda Odyssey, from MELLING, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 3 other brands. ITM ENGINE COMPONENTS RX9599 carries the "Popular" badge.

Listed part numbers: ITM ENGINE COMPONENTS RX9599, MELLING V0779 and MAHLE / CLEVITE 2114674, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts for the 2007 Honda Odyssey come from 4 brands — ATP, DAYCO, SKP and 1 other brand. The "Popular" part is SKP SK594267.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594267 is listed in this group.

Standard Replacement: 5 parts, from ATP, DAYCO and DORMAN. A representative part number is ATP 102235.

Part numbers include SKP SK594267, ATP 102235 and ATP 102367, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts for the 2007 Honda Odyssey come from 6 brands — AJUSA, APEX, BECK/ARNLEY and 3 other brands. The "Popular" part is APEX AMS1572.

This group includes APEX AMS1572, BECK/ARNLEY 0376239 and AJUSA 13208600 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Plenum Gasket parts are listed for the 2007 Honda Odyssey, from BECK/ARNLEY, FEL-PRO, MAHLE / CLEVITE and 3 other brands. FEL-PRO MS96410 carries the "Popular" badge.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts are listed for the 2007 Honda Odyssey, from MELLING, SBI, ITM ENGINE COMPONENTS and 3 other brands. MELLING V0778 carries the "Popular" badge.

This group includes MELLING V0778, SBI 10778 and ITM ENGINE COMPONENTS RV9599 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

33 Motor Mount parts are listed for the 2007 Honda Odyssey, from SKP, ANCHOR, BECK/ARNLEY and 4 other brands. SKP SKM9247 carries the "Popular" badge. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 26 parts from ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 3 other brands.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2007 Honda Odyssey.

This group includes ANCHOR 300332 and ANCHOR 300335.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

41 Oil parts are listed for the 2007 Honda Odyssey, from VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands. LIQUI MOLY 2259 carries the "Popular" badge. Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 22 parts.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2007 Honda Odyssey come from HAYDEN.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2007 Honda Odyssey — DORMAN 917387.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts are listed for the 2007 Honda Odyssey, from DORMAN, ELRING, AGS and 3 other brands. DORMAN 090033 carries the "Popular" badge.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2007 Honda Odyssey come from 5 brands — DORMAN, APEX, ELRING and 2 other brands. The "Popular" part is DORMAN 095144.

Part numbers include DORMAN 095144, APEX ADP1909 and ELRING 243600, among others listed above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2007 Honda Odyssey, from DORMAN, CALORSTAT, GATES and 2 other brands. DORMAN 80985 carries the "Popular" badge.

This group includes DORMAN 80985, CALORSTAT OC2335 and GATES 31284 and the remaining parts above.