2010 Honda Odyssey Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts are listed for the 2010 Honda Odyssey, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts are listed for the 2010 Honda Odyssey, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 10 other brands. FEL-PRO TCS46025 carries the "Popular" badge.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRH38Z.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts for the 2010 Honda Odyssey come from 5 brands — KING ENGINE BEARINGS, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH BB1538.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6837XP is listed in this group.

In the Standard Replacement grade, ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1538.

Listed part numbers: ENGINETECH BB1538, KING ENGINE BEARINGS CR6837XP and ITM ENGINE COMPONENTS 6B1503, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts for the 2010 Honda Odyssey come from 7 brands — ENGINETECH, FEL-PRO, AJUSA and 4 other brands. The "Popular" part is ENGINETECH HO35CSA.

This group includes ENGINETECH HO35CSA, FEL-PRO CS26265 and AJUSA 54146000 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 2010 Honda Odyssey, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH BC1537 carries the "Popular" badge.

Listed part numbers: ENGINETECH BC1537, MAHLE / CLEVITE MS2335A and ITM ENGINE COMPONENTS 4M1201, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts are listed for the 2010 Honda Odyssey, from SCHAEFFLER, SKF and WJB / INMOTION PARTS.

This group includes SCHAEFFLER SR3486, SCHAEFFLER SR4784 and SKF 99313 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts are listed for the 2010 Honda Odyssey, from ELRING, MAHLE / CLEVITE, TIMKEN and 10 other brands. ELRING 590797 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

15 Cylinder Head Bolt parts for the 2010 Honda Odyssey come from 9 brands — VICTOR REINZ, ENGINETECH, FEL-PRO and 6 other brands. The "Popular" part is ENGINETECH HB271.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

20 Cylinder Head Gasket parts for the 2010 Honda Odyssey come from 8 brands — FEL-PRO, APEX, ELRING and 5 other brands. The "Popular" part is FEL-PRO 26265PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

21 Cylinder Head Gasket Set parts for the 2010 Honda Odyssey come from 8 brands — ENGINETECH, FEL-PRO, APEX and 5 other brands. The "Popular" part is APEX AHS1069.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302172.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2010 Honda Odyssey.

Part numbers include KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2010 Honda Odyssey come from 2 brands — TECHPRO and VARIOUS MFR.

This group includes TECHPRO HO1228104 and the remaining parts above.

This table covers the Engine Cover grommets. Read more

One part is listed for the 2010 Honda Odyssey — DORMAN 49932.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts for the 2010 Honda Odyssey come from 4 brands — ENGINETECH, TOPLINE, AJUSA and 1 other brand. The "Popular" part is ENGINETECH HO35K3.

Listed part numbers: ENGINETECH HO35K3, ENGINETECH HO35K1 and AJUSA 50266900, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts are listed for the 2010 Honda Odyssey, from MELLING, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 3 other brands. ITM ENGINE COMPONENTS RX9599 carries the "Popular" badge.

Listed part numbers: ITM ENGINE COMPONENTS RX9599, MELLING V0779 and MAHLE / CLEVITE 2114674, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts for the 2010 Honda Odyssey come from 4 brands — ATP, DAYCO, SKP and 1 other brand. The "Popular" part is SKP SK594267.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594267 is listed in this group.

Standard Replacement: 5 parts, from ATP, DAYCO and DORMAN. A representative part number is ATP 102235.

Listed part numbers: SKP SK594267, ATP 102235 and ATP 102367, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

15 Intake Manifold Gasket parts for the 2010 Honda Odyssey come from 7 brands — BECK/ARNLEY, APEX, AJUSA and 4 other brands. The "Popular" part is APEX AMS1691.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Intake Plenum Gasket parts are listed for the 2010 Honda Odyssey, from BECK/ARNLEY, FEL-PRO, MAHLE / CLEVITE and 3 other brands. FEL-PRO MS96410 carries the "Popular" badge.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

11 Intake Valve parts are listed for the 2010 Honda Odyssey, from MELLING, SBI, MAHLE / CLEVITE and 4 other brands. MELLING V0778 carries the "Popular" badge.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

28 Motor Mount parts are listed for the 2010 Honda Odyssey, from ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 4 other brands. SKP SKM9411 carries the "Popular" badge. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 3 other brands.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2010 Honda Odyssey.

Part numbers include ANCHOR 300333 and ANCHOR 300336.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

48 Oil parts are listed for the 2010 Honda Odyssey, from VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands. MOBIL 124184 carries the "Popular" badge. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 25 parts from VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2010 Honda Odyssey come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2010 Honda Odyssey — DORMAN 917387.