2010 Honda Pilot Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts are listed for the 2010 Honda Pilot, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Camshaft Seal parts are listed for the 2010 Honda Pilot, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 9 other brands. FEL-PRO TCS46025 carries the "Popular" badge.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts for the 2010 Honda Pilot come from 5 brands — KING ENGINE BEARINGS, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH BB1538.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6837XP is listed in this group.

In the Standard Replacement grade, ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1538.

Part numbers include ENGINETECH BB1538, KING ENGINE BEARINGS CR6837XP and ITM ENGINE COMPONENTS 6B1503, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts for the 2010 Honda Pilot come from 5 brands — FEL-PRO, AJUSA, APEX and 2 other brands. The "Popular" part is FEL-PRO CS26265.

Part numbers include FEL-PRO CS26265, AJUSA 54175400 and APEX ACS1055, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 2010 Honda Pilot, from TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. ENGINETECH BC1537 carries the "Popular" badge.

Part numbers include ENGINETECH BC1537, ITM ENGINE COMPONENTS 4M1201 and KING ENGINE BEARINGS MB4508SI, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 2010 Honda Pilot, from SCHAEFFLER, SKF and WJB / INMOTION PARTS.

This group includes SCHAEFFLER SR4784, SKF 99313 and WJB / INMOTION PARTS WS99317.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts are listed for the 2010 Honda Pilot, from ELRING, MAHLE / CLEVITE, TIMKEN and 10 other brands. FEL-PRO BS40685 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

8 Cylinder Head Bolt parts for the 2010 Honda Pilot come from 8 brands — APEX, FEL-PRO, AJUSA and 5 other brands. The "Popular" part is APEX AHB155.

Part numbers include APEX AHB155, FEL-PRO ES713291 and AJUSA 81052100, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

17 Cylinder Head Gasket parts for the 2010 Honda Pilot come from 8 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 5 other brands. The "Popular" part is FEL-PRO 26510PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Cylinder Head Gasket Set parts for the 2010 Honda Pilot come from 8 brands — ENGINETECH, FEL-PRO, ELRING and 5 other brands. The "Popular" part is APEX AHS1069.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2010 Honda Pilot.

Listed part numbers: KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO HO1228124.

This table covers the Engine Cover grommets. Read more

One part is listed for the 2010 Honda Pilot — DORMAN 49932.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2010 Honda Pilot come from 3 brands — AJUSA, FEL-PRO and TOPLINE.

Part numbers include AJUSA 50307300, FEL-PRO 2603206 and TOPLINE CGSH51.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts are listed for the 2010 Honda Pilot, from MELLING, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 3 other brands. ITM ENGINE COMPONENTS RX9599 carries the "Popular" badge.

This group includes ITM ENGINE COMPONENTS RX9599, MELLING V0779 and MAHLE / CLEVITE 2114674 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts for the 2010 Honda Pilot come from 2 brands — ATP and DAYCO.

Part numbers include ATP 102367 and DAYCO PB1713N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 2010 Honda Pilot come from 6 brands — BECK/ARNLEY, ELRING, APEX and 3 other brands. The "Popular" part is APEX AMS1691.

This group includes APEX AMS1691, MAHLE / CLEVITE MS19696 and BECK/ARNLEY 0376217 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Plenum Gasket parts are listed for the 2010 Honda Pilot, from BECK/ARNLEY, VICTOR REINZ, FEL-PRO and 3 other brands. FEL-PRO MS964093 carries the "Popular" badge.

This group includes FEL-PRO MS964093, MAHLE / CLEVITE MS19700 and AJUSA 01130900 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts are listed for the 2010 Honda Pilot, from MELLING, SBI, ENGINETECH and 3 other brands. MELLING V0336 carries the "Popular" badge.

This group includes MELLING V0336, SBI 13336 and ENGINETECH IM4476 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

16 Motor Mount parts are listed for the 2010 Honda Pilot, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 4 other brands. ANCHOR 9411 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKM9411.

The Standard Replacement section: 15 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 3 other brands. ANCHOR 9411 is listed in this group.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2010 Honda Pilot.

Part numbers include ANCHOR 300406 and ANCHOR 300407.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

38 Oil parts are listed for the 2010 Honda Pilot, from VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands. LIQUI MOLY 2259 carries the "Popular" badge. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by VALVOLINE, LIQUI MOLY, MOBIL and 2 other brands.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2010 Honda Pilot come from HAYDEN.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2010 Honda Pilot — DORMAN 917387.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 2010 Honda Pilot, from DORMAN, ELRING, AGS and 2 other brands. DORMAN 090033 carries the "Popular" badge.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2010 Honda Pilot come from 6 brands — DORMAN, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is DORMAN 095144.

Listed part numbers: DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2010 Honda Pilot, from CALORSTAT, DORMAN, GATES and 1 other brand.

This group includes CALORSTAT OC2335, DORMAN 80985 and GATES 31284 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts are listed for the 2010 Honda Pilot, from BOSCH, VARIOUS MFR, WIX and 11 other brands. WIX 57356XP carries the "Popular" badge.

Economy: 5 parts, from BOSCH, FVP, PRO-TEC and 2 other brands. A representative part number is BOSCH 72226WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57356XP.

The Standard Replacement section: 10 options from BOSCH, DENSO, WIX and 7 other brands. BOSCH 3323 is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

6 Oil Filter Adapter Gasket / O-Ring parts for the 2010 Honda Pilot come from 4 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO 73040.

Listed part numbers: FEL-PRO 73040, MAHLE / CLEVITE B31937 and APEX AOM6025, plus the other parts above.

This table covers the Oil Filter Support tubes. Read more

This group shows a single part: AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts for the 2010 Honda Pilot come from 4 brands — ATP, DORMAN, SKP and 1 other brand.

This group includes ATP 103652, DORMAN 264380 and SKP SK264380 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pan Gasket parts are listed for the 2010 Honda Pilot, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO OS30954T and VICTOR REINZ 703141410.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2010 Honda Pilot — FEL-PRO 73196.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

6 Oil Pump parts are listed for the 2010 Honda Pilot, from SKP, ENGINETECH, MELLING and 3 other brands. SKP SKPM531 carries the "Popular" badge.

Economy: 2 parts, from SKP and ENGINETECH. A representative part number is SKP SKPM531.

The Standard Replacement section: 3 options from MELLING, ITM ENGINE COMPONENTS and TOPLINE. MELLING M531 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Part numbers include SKP SKPM531, ENGINETECH EPK168 and MELLING M531, among others listed above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts for the 2010 Honda Pilot come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 01130500 and ELRING 967650.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

This group shows a single part: SKF 99138.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Oil Pump Seal parts for the 2010 Honda Pilot come from 5 brands — SKF, BCA, NATIONAL and 2 other brands. The "Popular" part is SKF 13907.

Part numbers include SKF 13907, BCA NS711181 and NATIONAL 711181, among others listed above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

7 Piston parts for the 2010 Honda Pilot come from 5 brands — MAHLE / CLEVITE, SEALED POWER, ENGINETECH and 2 other brands. The "Popular" part is ENGINETECH P4906.

In the Premium grade, MAHLE / CLEVITE supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MAHLE / CLEVITE 2243916.

Standard Replacement: 5 parts, from SEALED POWER, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. A representative part number is ENGINETECH P4906.

Part numbers include ENGINETECH P4906, MAHLE / CLEVITE 2243916 and MAHLE / CLEVITE 2243916WR, among others listed above.