2011 Honda City Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts are listed for the 2011 Honda City, from ELRING and VICTOR REINZ.

Part numbers include ELRING 290710 and VICTOR REINZ 815327200.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 2011 Honda City come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 54172900 and ELRING 522300.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

One part is listed for the 2011 Honda City — SCHAEFFLER SR3549.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts are listed for the 2011 Honda City, from ELRING, SCHAEFFLER, ACDELCO and 1 other brand. ACDELCO 228008 carries the "Popular" badge.

Part numbers include ACDELCO 228008, ELRING 590797 and AJUSA 15035700, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 2011 Honda City come from 2 brands — AJUSA and ELRING.

Part numbers include AJUSA 81034300 and ELRING 728110.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts for the 2011 Honda City come from 3 brands — AJUSA, ELRING and VICTOR REINZ.

Part numbers include AJUSA 10193300, ELRING 693980 and VICTOR REINZ 615408500.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 2011 Honda City come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 52284200 and ELRING 794780.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50304000.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 694290.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Motor Mount parts are listed for the 2011 Honda City, from ANCHOR and WESTAR.

Listed part numbers: ANCHOR 9602 and WESTAR EM5872.

This table covers the Motor Mount kits. Read more

One part is listed for the 2011 Honda City — ANCHOR 301096.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

VALVOLINE supplies the 3 Oil parts for the 2011 Honda City.

In the Full Synthetic grade, VALVOLINE supplies 2 parts: full-synthetic oils. A representative part number is VALVOLINE VV935.

The High Mileage (>75,000 Miles) section lists 1 option from VALVOLINE — oils grouped for high-mileage engines. VALVOLINE 881052 is listed in this group.

This group includes VALVOLINE VV935, VALVOLINE 881165 and VALVOLINE 881052.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2011 Honda City come from HAYDEN.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2011 Honda City, from DORMAN, ELRING and SKP. DORMAN 090033 carries the "Popular" badge.

Part numbers include DORMAN 090033, DORMAN 090053 and DORMAN 092020, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts for the 2011 Honda City come from 3 brands — AJUSA, DORMAN and ELRING.

Part numbers include AJUSA 22007400, DORMAN 095144 and ELRING 243600.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2011 Honda City, from GATES and MOTORAD.

This group includes GATES 31284 and MOTORAD MO159.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts are listed for the 2011 Honda City, from HENGST, MANN, VARIOUS MFR and 3 other brands. MOBIL M1110A carries the "Popular" badge.

In the Economy grade, VARIOUS MFR supplies 1 part: the catalog's value-priced group. A representative part number is VARIOUS MFR PG7662.

In the High Performance / Heavy Duty grade, MOBIL supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1110A.

The Standard Replacement section lists 5 options from HENGST, MANN and WIX — built to original-equipment specification. WIX 51083 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: MOBIL M1110A, VARIOUS MFR PG7662 and WIX 51083, plus the other parts above.

This table covers the oil pans that hold the engine's oil sump. Read more

This group shows a single part: SPECTRA PREMIUM HOP23A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2011 Honda City.

Listed part numbers: AJUSA 14090600 and AJUSA 59020300.

This table covers the gaskets that seal the Oil Strainer. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 01239000.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: HASTINGS MANUFACTURING 2C5394.

This table covers the Timing Cam sprockets. Read more

One part is listed for the 2011 Honda City — CLOYES S968T.

This table covers the timing chains that keep the cams in time with the crank. Read more

This group shows a single part: CLOYES C731F.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

3 Timing Chain & Component Kit parts are listed for the 2011 Honda City, from CLOYES and INA.

Listed part numbers: CLOYES 90731SX, CLOYES 90731S and INA ZC90731S.

This table covers the guides and dampers that keep the timing chain on its path. Read more

2 Timing Chain Guide / Damper parts for the 2011 Honda City come from CLOYES.

Listed part numbers: CLOYES 95643 and CLOYES 95642.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts are listed for the 2011 Honda City, from CLOYES and FVP.

Part numbers include CLOYES 95641, among others listed above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2011 Honda City — SCHAEFFLER SS5126.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

One part is listed for the 2011 Honda City — CLOYES S967.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts for the 2011 Honda City come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.

Listed part numbers: ANCHOR 9695, ANCHOR 9533 and DEA / MARMON RIDE CONTROL A4574, plus the other parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts are listed for the 2011 Honda City, from ELRING and VICTOR REINZ.

Part numbers include ELRING 703380 and VICTOR REINZ 715414600.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts are listed for the 2011 Honda City, from ELRING and AJUSA. ELRING 084300 carries the "Popular" badge.

Listed part numbers: ELRING 084300, AJUSA 57030200 and AJUSA 12014300, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2011 Honda City, from GATES and STANDARD MOTOR PRODUCTS.

Economy: 1 part, from GATES. A representative part number is GATES VVS323.

The Standard Replacement section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS VVT304 is listed in this group.

Part numbers include GATES VVS323 and STANDARD MOTOR PRODUCTS VVT304.

This table covers the Variable Valve Timing (VVT) Solenoid filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

One part is listed for the 2011 Honda City — GATES VVS909.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 703510.