2011 Honda CR-V Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts are listed for the 2011 Honda CR-V, from SKF, TIMKEN and WJB / INMOTION PARTS.

Part numbers include SKF 13771A, TIMKEN SL260470 and WJB / INMOTION PARTS WS13771A.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

20 CV Axle parts are listed for the 2011 Honda CR-V, from GSP, TRAKMOTIVE, TOP NOTCH and 3 other brands. GSP NCV36574 carries the "Popular" badge.

This table covers the CV Axle Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: BECK/ARNLEY 0514288.

This table covers the CV Intermediate shafts. Read more

3 CV Intermediate Shaft parts for the 2011 Honda CR-V come from 3 brands — GSP, TOP NOTCH and TRAKMOTIVE.

Part numbers include GSP NEX36007, TOP NOTCH TN50307IS and TRAKMOTIVE HO3561.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

5 CV Joint Boot parts are listed for the 2011 Honda CR-V, from MEVOTECH, BECK/ARNLEY and GKN. MEVOTECH DX610 carries the "Popular" badge.

Part numbers include MEVOTECH DX610, BECK/ARNLEY 1032314 and BECK/ARNLEY 1032927, among others listed above.

This table covers the bearings and races that support the differential carrier. Read more

SKF supplies both parts for the 2011 Honda CR-V.

Listed part numbers: SKF BR155 and SKF BR154.

This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Differential Mount parts for the 2011 Honda CR-V come from 6 brands — DORMAN, SKP, AUTOTECNICA and 3 other brands. The "Popular" part is DORMAN 905539.

Listed part numbers: DORMAN 905539, SKP SKMA65010 and AUTOTECNICA HA0420172, plus the other parts above.

This table covers the bearings and races on the differential pinion. Read more

3 Differential Pinion Bearing / Race parts for the 2011 Honda CR-V come from SCHAEFFLER.

Listed part numbers: SCHAEFFLER L44610, SCHAEFFLER KL44649 and SCHAEFFLER KT4.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Differential Pinion Seal parts are listed for the 2011 Honda CR-V, from NATIONAL, SCHAEFFLER and TIMKEN.

Part numbers include NATIONAL 711177, SCHAEFFLER SS2622 and TIMKEN 712551.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

2 Differential Repair Sleeve parts for the 2011 Honda CR-V come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts for the 2011 Honda CR-V come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 711087 and WJB / INMOTION PARTS WS711087.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

7 Drive Shaft parts for the 2011 Honda CR-V come from 7 brands — SKP, WJB / INMOTION PARTS, CARDONE and 4 other brands. The "Popular" part is SKP SK654001.

Listed part numbers: SKP SK654001, WJB / INMOTION PARTS WDS36002 and CARDONE 654001, plus the other parts above.

This table covers the seals at the Transfer Case Companion Flange. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Companion Flange Seal parts are listed for the 2011 Honda CR-V, from ATP and PIONEER.

Part numbers include ATP HO36 and PIONEER 759072.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Input Shaft Bearing parts are listed for the 2011 Honda CR-V, from SKF, SCHAEFFLER and WJB / INMOTION PARTS. SKF L44610VP carries the "Popular" badge.

In the Economy grade, WJB / INMOTION PARTS supplies 1 part: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WTL44610.

The Standard Replacement section lists 5 options from SKF and SCHAEFFLER — built to original-equipment specification. SKF L44610VP is listed in this group.

Part numbers include SKF L44610VP, WJB / INMOTION PARTS WTL44610 and SKF BR4, among others listed above.

This table covers the Transfer Case mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Transfer Case Mount parts for the 2011 Honda CR-V come from 2 brands — ANCHOR and PIONEER.

Part numbers include ANCHOR 9879 and PIONEER 629879.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Output Shaft Bearing parts for the 2011 Honda CR-V come from 4 brands — SKF, SCHAEFFLER, WJB / INMOTION PARTS and 1 other brand. The "Popular" part is ACDELCO A4.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTL44610 is listed in this group.

Standard Replacement: 5 parts, from SKF, SCHAEFFLER and ACDELCO. A representative part number is ACDELCO A4.

This group includes ACDELCO A4, WJB / INMOTION PARTS WTL44610 and SKF BR4 and the remaining parts above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts are listed for the 2011 Honda CR-V, from SCHAEFFLER and SKF.

This group includes SCHAEFFLER SS2622 and SKF 15709.