2011 Honda Fit Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

12 Camshaft Position Sensor parts for the 2011 Honda Fit come from 12 brands — ULTRA-POWER, FAMOUS BRAND, HOLSTEIN and 9 other brands. The "Popular" part is ULTRA-POWER PC835.

The Economy section lists 5 options from ULTRA-POWER, FAMOUS BRAND, HOLSTEIN and 2 other brands — the catalog's value-priced group. ULTRA-POWER PC835 is listed in this group.

In the Standard Replacement grade, DELPHI, STANDARD MOTOR PRODUCTS, ASTEMO / HITACHI and 4 other brands supply 7 parts: built to original-equipment specification. A representative part number is DELPHI SS11944.

This table covers the seals at the Camshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2011 Honda Fit — MAHLE / CLEVITE 76757.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

11 Crankshaft Position Sensor parts for the 2011 Honda Fit come from 11 brands — SPECTRA PREMIUM, HOLSTEIN, PRENCO and 8 other brands. The "Popular" part is SPECTRA PREMIUM S10373.

The Economy section: 5 options from SPECTRA PREMIUM, HOLSTEIN, PRENCO and 2 other brands. SPECTRA PREMIUM S10373 is listed in this group.

Standard Replacement: 6 parts, from DELPHI, STANDARD MOTOR PRODUCTS, ASTEMO / HITACHI and 3 other brands. A representative part number is DELPHI SS11993.

This table covers the seals at the Crankshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

FEL-PRO supplies both parts for the 2011 Honda Fit.

Part numbers include FEL-PRO 72377 and FEL-PRO 72301.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

20 Ignition Coil parts for the 2011 Honda Fit come from 19 brands — STANDARD MOTOR PRODUCTS, SKP, ULTRA-POWER and 16 other brands. The "Popular" part is SKP SKIC092.

The Economy section: 10 options from SKP, ULTRA-POWER, AUTOTECNICA and 7 other brands. SKP SKIC092 is listed in this group.

In the Premium grade, ASTEMO / HITACHI and DELPHI supply 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ASTEMO / HITACHI IGC0073.

Standard Replacement: 8 parts, from NGK, BECK/ARNLEY, DENSO and 5 other brands. A representative part number is NGK 48938.

This table covers the lock cylinders in the ignition switch. Read more

4 Ignition Lock Cylinder parts for the 2011 Honda Fit come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS US1284, STANDARD MOTOR PRODUCTS US1280 and WELLS 4H1797 and the remaining parts above.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

14 Spark Plug parts are listed for the 2011 Honda Fit, from DENSO, NGK, CHAMPION and 2 other brands. NGK 97138 carries the "Popular" badge.

In the Copper / Nickel grade, DENSO supplies 1 part: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is DENSO 3374.

In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, CHAMPION and DENSO supply 2 parts: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is CHAMPION 7000.

The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 7 options from DENSO, NGK, BOSCH and 1 other brand — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 97138 is listed in this group.

In the Platinum (lasts up to 2x longer than Copper / Nickel) grade, DENSO, ACDELCO and NGK supply 3 parts: grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is DENSO 4504.

In the Ruthenium (maximum durability & ignitability) grade, NGK supplies 1 part: grouped under the catalog's "Ruthenium (maximum durability & ignitability)" designation — the notes column spells out what sets them apart. A representative part number is NGK 94279.

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it. Read more

7 Spark Plug / Ignition Coil Boot parts for the 2011 Honda Fit come from 7 brands — FAMOUS BRAND, PRESTOLITE, UNITED MOTOR PRODUCTS and 4 other brands. The "Popular" part is NGK 59024.

The Economy section: 4 options from FAMOUS BRAND, PRESTOLITE, UNITED MOTOR PRODUCTS and 1 other brand. FAMOUS BRAND 357099 is listed in this group.

Standard Replacement: 3 parts, from NGK, STANDARD MOTOR PRODUCTS and DENSO. A representative part number is NGK 59024.

Listed part numbers: NGK 59024, FAMOUS BRAND 357099 and UNITED MOTOR PRODUCTS 913S, plus the other parts above.