2011 Honda Odyssey Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

12 Camshaft Position Sensor parts are listed for the 2011 Honda Odyssey, from HOLSTEIN, PRENCO, ULTRA-POWER and 9 other brands. ASTEMO / HITACHI CPS0025 carries the "Popular" badge.

In the Economy grade, HOLSTEIN, PRENCO, ULTRA-POWER and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is HOLSTEIN 2CAM0357.

The Standard Replacement section lists 8 options from ASTEMO / HITACHI, DELPHI, STANDARD MOTOR PRODUCTS and 5 other brands — built to original-equipment specification. ASTEMO / HITACHI CPS0025 is listed in this group.

This table covers the seals at the Camshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 76757.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

16 Crankshaft Position Sensor parts are listed for the 2011 Honda Odyssey, from STANDARD MOTOR PRODUCTS, DORMAN, HOLSTEIN and 12 other brands. STANDARD MOTOR PRODUCTS PC813T carries the "Popular" badge.

Economy: 7 parts, from STANDARD MOTOR PRODUCTS, DORMAN, HOLSTEIN and 4 other brands. A representative part number is STANDARD MOTOR PRODUCTS PC813T.

The Standard Replacement section: 9 options from DELPHI, DENSO, STANDARD MOTOR PRODUCTS and 6 other brands. DELPHI SS11389 is listed in this group.

This table covers the seals at the Crankshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO 72301.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

20 Ignition Coil parts are listed for the 2011 Honda Odyssey, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, AUTOTECNICA and 14 other brands. AUTOTECNICA HA1319609 carries the "Popular" badge.

Economy: 10 parts, from STANDARD MOTOR PRODUCTS, AUTOTECNICA, ULTRA-POWER and 6 other brands. A representative part number is AUTOTECNICA HA1319609.

The Premium section lists 3 options from ASTEMO / HITACHI, DELPHI and STANDARD MOTOR PRODUCTS — a step above OE specification in materials, tolerances or warranty terms. ASTEMO / HITACHI IGC0056 is listed in this group.

The Standard Replacement section: 7 options from WALKER PRODUCTS, DENSO, BECK/ARNLEY and 3 other brands. DENSO 6732311 is listed in this group.

This table covers the lock cylinders in the ignition switch. Read more

One part is listed for the 2011 Honda Odyssey — STANDARD MOTOR PRODUCTS US1116.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

9 Spark Plug parts for the 2011 Honda Odyssey come from 4 brands — NGK, BOSCH, DENSO and 1 other brand. The "Popular" part is NGK 93175.

In the Iridium (lasts up to 4x longer than Copper / Nickel) grade, NGK, BOSCH, DENSO and 1 other brand supply 7 parts: grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 93175.

The Platinum (lasts up to 2x longer than Copper / Nickel) section lists 1 option from NGK — grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 97390 is listed in this group.

The Ruthenium (maximum durability & ignitability) section lists 1 option from NGK — grouped under the catalog's "Ruthenium (maximum durability & ignitability)" designation — the notes column spells out what sets them apart. NGK 96358 is listed in this group.

Listed part numbers: NGK 93175, BOSCH 96337 and BOSCH 96305, plus the other parts above.

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it. Read more

5 Spark Plug / Ignition Coil Boot parts are listed for the 2011 Honda Odyssey, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, ACDELCO and 1 other brand. STANDARD MOTOR PRODUCTS SPP155E carries the "Popular" badge.

Economy: 2 parts, from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS 19581.

The Standard Replacement section: 3 options from STANDARD MOTOR PRODUCTS, ACDELCO and NGK. STANDARD MOTOR PRODUCTS SPP155E is listed in this group.

Part numbers include STANDARD MOTOR PRODUCTS SPP155E, STANDARD MOTOR PRODUCTS 19581 and WALKER PRODUCTS 900P2123, among others listed above.

This table covers the Spark Plug tubes. Read more

This group shows a single part: MELLING MSPT6.

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Spark Plug Tube Seal parts are listed for the 2011 Honda Odyssey, from BECK/ARNLEY and MAHLE / CLEVITE.

Part numbers include BECK/ARNLEY 0396579 and MAHLE / CLEVITE GS33778.