2012 Honda City Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: VICTOR REINZ 815327200.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2012 Honda City — AJUSA 54172900.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

This group shows a single part: SCHAEFFLER SR3549.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts for the 2012 Honda City come from 4 brands — SCHAEFFLER, ACDELCO, AJUSA and 1 other brand. The "Popular" part is ACDELCO 228008.

Part numbers include ACDELCO 228008, AJUSA 15035700 and ELRING 290710, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2012 Honda City — AJUSA 81034300.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts are listed for the 2012 Honda City, from AJUSA and VICTOR REINZ.

This group includes AJUSA 10193300 and VICTOR REINZ 615408500.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2012 Honda City — AJUSA 52284200.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2012 Honda City — AJUSA 50304000.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Motor Mount parts for the 2012 Honda City come from 2 brands — ANCHOR and WESTAR.

Part numbers include ANCHOR 9602 and WESTAR EM5872.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 301096.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

3 Oil parts for the 2012 Honda City come from VALVOLINE.

The Full Synthetic section lists 2 options from VALVOLINE — full-synthetic oils. VALVOLINE VV935 is listed in this group.

In the High Mileage (>75,000 Miles) grade, VALVOLINE supplies 1 part: oils grouped for high-mileage engines. A representative part number is VALVOLINE 881052.

Part numbers include VALVOLINE VV935, VALVOLINE 881165 and VALVOLINE 881052.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2012 Honda City.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 2012 Honda City come from 2 brands — DORMAN and SKP.

Listed part numbers: DORMAN 090033, DORMAN 090053 and DORMAN 092020, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 2012 Honda City, from AJUSA and DORMAN.

Listed part numbers: AJUSA 22007400 and DORMAN 095144.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2012 Honda City come from 2 brands — GATES and MOTORAD.

Part numbers include GATES 31284 and MOTORAD MO159.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts for the 2012 Honda City come from 6 brands — HENGST, MANN, VARIOUS MFR and 3 other brands. The "Popular" part is MOBIL M1110A.

The Economy section lists 1 option from VARIOUS MFR — the catalog's value-priced group. VARIOUS MFR PG7662 is listed in this group.

The High Performance / Heavy Duty section lists 1 option from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1110A is listed in this group.

In the Standard Replacement grade, HENGST, MANN and WIX supply 5 parts: built to original-equipment specification. A representative part number is WIX 51083.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: MOBIL M1110A, VARIOUS MFR PG7662 and WIX 51083, plus the other parts above.

This table covers the oil pans that hold the engine's oil sump. Read more

One part is listed for the 2012 Honda City — SPECTRA PREMIUM HOP23A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pan Gasket parts for the 2012 Honda City come from AJUSA.

Listed part numbers: AJUSA 14090600 and AJUSA 59020300.

This table covers the gaskets that seal the Oil Strainer. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2012 Honda City — AJUSA 01239000.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 2012 Honda City — HASTINGS MANUFACTURING 2C5394.

This table covers the Timing Cam sprockets. Read more

This group shows a single part: CLOYES S968T.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2012 Honda City — CLOYES C731F.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

3 Timing Chain & Component Kit parts for the 2012 Honda City come from 2 brands — CLOYES and INA.

Part numbers include CLOYES 90731SX, CLOYES 90731S and INA ZC90731S.

This table covers the guides and dampers that keep the timing chain on its path. Read more

CLOYES supplies both parts for the 2012 Honda City.

Part numbers include CLOYES 95643 and CLOYES 95642.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts for the 2012 Honda City come from 2 brands — CLOYES and FVP.

Listed part numbers: CLOYES 95641, plus the other parts above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SCHAEFFLER SS5126.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

This group shows a single part: CLOYES S967.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts are listed for the 2012 Honda City, from ANCHOR and DEA / MARMON RIDE CONTROL.

This group includes ANCHOR 9695, ANCHOR 9533 and DEA / MARMON RIDE CONTROL A4574 and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 715414600.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Valve Stem Seal parts for the 2012 Honda City come from AJUSA.

Part numbers include AJUSA 57030200 and AJUSA 12014300.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2012 Honda City come from 2 brands — GATES and STANDARD MOTOR PRODUCTS.

The Economy section: 1 option from GATES. GATES VVS323 is listed in this group.

Standard Replacement: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS VVT304.

This group includes GATES VVS323 and STANDARD MOTOR PRODUCTS VVT304.

This table covers the Variable Valve Timing (VVT) Solenoid filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

This group shows a single part: GATES VVS909.