2012 Honda Odyssey Automatic Transmission Parts

This table covers the vents on a transmission or axle housing. Read more

One part is listed for the 2012 Honda Odyssey — DORMAN 14161.

This table covers the Dipstick / Fluid Filler tubes. Read more

2 Dipstick / Fluid Filler Tube parts for the 2012 Honda Odyssey come from DORMAN.

Listed part numbers: DORMAN 921068 and DORMAN 921067.

This table covers the gaskets that seal the Drain Plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2012 Honda Odyssey — DORMAN 652530CD.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

12 Filter parts for the 2012 Honda Odyssey come from 5 brands — BECK/ARNLEY, VAICO, ATP and 2 other brands. The "Popular" part is BECK/ARNLEY 0440383.

The Economy section lists 1 option from VARIOUS MFR — the catalog's value-priced group. VARIOUS MFR PT99442 is listed in this group.

In the Standard Replacement grade, BECK/ARNLEY, VAICO, ATP and 1 other brand supply 11 parts: built to original-equipment specification. A representative part number is BECK/ARNLEY 0440383.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

2 Flexplate parts are listed for the 2012 Honda Odyssey, from ATP and PIONEER.

Listed part numbers: ATP Z634 and PIONEER FRA564.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

3 Fluid Cooler parts for the 2012 Honda Odyssey come from 2 brands — KOYORAD and TECHPRO.

Part numbers include KOYORAD EC0076, KOYORAD EC0076J and TECHPRO HO4050105.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

3 Fluid Cooler Line / Hose parts for the 2012 Honda Odyssey come from 3 brands — AUTOTECNICA, DORMAN and SUNSONG.

Listed part numbers: AUTOTECNICA HA1219033, DORMAN 724607 and SUNSONG 5801663.

This table covers the Fluid Pan drain plugs. Read more

One part is listed for the 2012 Honda Odyssey — DORMAN 090178.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

This group shows a single part: WELLS 5S9597.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Input Shaft Seal parts are listed for the 2012 Honda Odyssey, from SKF and WJB / INMOTION PARTS.

This group includes SKF 20335A and WJB / INMOTION PARTS WS20335A.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Manual Shaft Seal parts are listed for the 2012 Honda Odyssey, from BCA, NATIONAL, TIMKEN and 1 other brand.

This group includes BCA NS221207 and NATIONAL 221207 and the remaining parts above.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

11 Output Shaft Repair Sleeve parts for the 2012 Honda Odyssey come from 4 brands — NATIONAL, BCA, WJB / INMOTION PARTS and 1 other brand. The "Popular" part is NATIONAL 99139.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Output Shaft Seal parts for the 2012 Honda Odyssey come from 7 brands — NATIONAL, SKF, WJB / INMOTION PARTS and 4 other brands. The "Popular" part is NATIONAL 712551.

This table covers the rebuild kits for this assembly. Read more

TRANSTEC supplies both parts for the 2012 Honda Odyssey.

Part numbers include TRANSTEC 81000230 and TRANSTEC 81000481.

This table covers the wear sleeves used to restore a Shift Shaft seal surface. Read more

One part is listed for the 2012 Honda Odyssey — SKF 99049.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts are listed for the 2012 Honda Odyssey, from SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SS2111 and SKF 4710.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

10 Shift Solenoid parts are listed for the 2012 Honda Odyssey, from WELLS, ROSTRA, BECK/ARNLEY and 3 other brands. ROSTRA 520710 carries the "Popular" badge.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: TC REMANUFACTURING HO31.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

3 Torque Converter Repair Sleeve parts are listed for the 2012 Honda Odyssey, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

This group includes NATIONAL 99181, SCHAEFFLER SR3501 and WJB / INMOTION PARTS WS99181.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Torque Converter Shaft Seal parts are listed for the 2012 Honda Odyssey, from NATIONAL, TIMKEN and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 710868, TIMKEN 710238 and WJB / INMOTION PARTS WS710868.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

17 Transmission Fluid parts for the 2012 Honda Odyssey come from 9 brands — VALVOLINE, LIQUI MOLY, PENTOSIN and 6 other brands. The "Popular" part is ACDELCO 109243.

In the ATF 64 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058113.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

In the DW-1 grade, AISIN supplies 1 part: grouped under the catalog's "DW-1" designation — the notes column spells out what sets them apart. A representative part number is AISIN ATFDW1.

The Multi-Vehicle section lists 10 options from VALVOLINE, LIQUI MOLY, LUCAS OIL and 2 other brands — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The Type III (H) section lists 2 options from IDEMITSU — grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. IDEMITSU 30040090750 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

7 Transmission Fluid Additive parts for the 2012 Honda Odyssey come from LUBEGARD. The "Popular" part is LUBEGARD 19610.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 61910, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

9 Transmission Mount parts are listed for the 2012 Honda Odyssey, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 2 other brands. ANCHOR 9512 carries the "Popular" badge.

Listed part numbers: ANCHOR 9512, ANCHOR 9667 and BECK/ARNLEY 1042398, plus the other parts above.