2013 Honda Pilot Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts are listed for the 2013 Honda Pilot, from SKF, TIMKEN and WJB / INMOTION PARTS.

This group includes SKF 15757A, TIMKEN 710798 and WJB / INMOTION PARTS WS15757A.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

17 CV Axle parts are listed for the 2013 Honda Pilot, from GSP, TRAKMOTIVE, CARDONE and 2 other brands. APWI HO8489 carries the "Popular" badge.

In the Economy grade, CARDONE supplies 2 parts: the catalog's value-priced group. A representative part number is CARDONE 604261.

The Standard Replacement section lists 15 options from GSP, TRAKMOTIVE, APWI and 2 other brands — built to original-equipment specification. APWI HO8489 is listed in this group.

This table covers the constant-velocity joints at each end of a drive axle. Read more

ACKOJA supplies both parts for the 2013 Honda Pilot.

This group includes ACKOJA A269870 and ACKOJA A269924.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts are listed for the 2013 Honda Pilot, from BECK/ARNLEY and MEVOTECH.

Listed part numbers: BECK/ARNLEY 1032968, BECK/ARNLEY 1032867 and MEVOTECH DX655, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

SKF supplies both parts for the 2013 Honda Pilot.

Listed part numbers: SKF BR148 and SKF BR152.

This table covers the Differential Oil temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

One part is listed for the 2013 Honda Pilot — AUTOTECNICA HA1317940.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

3 Differential Repair Sleeve parts for the 2013 Honda Pilot come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99157, SCHAEFFLER SR3483 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts for the 2013 Honda Pilot come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 710798 and WJB / INMOTION PARTS WS710798.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

8 Drive Shaft parts for the 2013 Honda Pilot come from 8 brands — CARDONE, DORMAN, GSP and 5 other brands.

Listed part numbers: CARDONE 654006, DORMAN 936024 and GSP PS900256, plus the other parts above.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

VALVOLINE supplies the 10 Transfer Case Fluid parts for the 2013 Honda Pilot. VALVOLINE VV820 carries the "Popular" badge.

In the SAE 75W-90 grade, VALVOLINE supplies 6 parts: grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV820.

In the SAE 80W-90 grade, VALVOLINE supplies 4 parts: grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV831.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Input Shaft Bearing parts are listed for the 2013 Honda Pilot, from SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER 32205 and SKF BR32205.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

4 Transfer Case Input Shaft Repair Sleeve parts for the 2013 Honda Pilot come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS99147, NATIONAL 99147 and SCHAEFFLER SR3476, among others listed above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts for the 2013 Honda Pilot come from 3 brands — WJB / INMOTION PARTS, NATIONAL and SKF.

This group includes NATIONAL 710721, SKF 18883A and WJB / INMOTION PARTS WS710721 and the remaining parts above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2013 Honda Pilot — SCHAEFFLER SS5926.