2016 Honda Fit Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

16 Coolant / Antifreeze parts for the 2016 Honda Fit come from 7 brands — PRESTONE, PEAK, VALVOLINE and 4 other brands. The "Popular" part is FVP MV5050GAL. Every part fits both the 1.5L L4 DOHC and the 1.5L L4 SOHC.

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 4 options from FVP, PRESTONE, PEAK and 1 other brand — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Premium grade, PRESTONE and PEAK supply 5 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, BECK/ARNLEY, VALVOLINE, AISIN and 2 other brands supply 6 parts: built to original-equipment specification. A representative part number is VALVOLINE 861398.

This table covers the hard pipes and extra hoses in the coolant circuit. Read more

2 Coolant Hose / Pipe parts for the 2016 Honda Fit come from 2 brands — CONTINENTAL and GATES. Every part fits both the 1.5L L4 DOHC and the 1.5L L4 SOHC.

Listed part numbers: CONTINENTAL 63706 and GATES 12210.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2016 Honda Fit — AJUSA 16022400.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

One part is listed for the 2016 Honda Fit — TECHPRO HO3014135.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

3 Coolant Reservoir Cap parts are listed for the 2016 Honda Fit, from CALORSTAT, DORMAN and MOTORAD. All of them fit every engine offered in the 2016 Fit.

Listed part numbers: CALORSTAT RC0174, DORMAN 54228 and MOTORAD T108.

This table covers the Cooling Fan control modules. Read more

US MOTOR WORKS supplies the 3 Cooling Fan Control Module parts for the 2016 Honda Fit. All of them fit every engine offered in the 2016 Fit.

Part numbers include US MOTOR WORKS 16749, US MOTOR WORKS 16789 and US MOTOR WORKS 16795.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts for the 2016 Honda Fit come from 2 brands — MOTORAD and GATES. Every part fits both the 1.5L L4 DOHC and the 1.5L L4 SOHC.

Listed part numbers: GATES 31409, MOTORAD 3124 and MOTORAD 3125.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

13 Radiator parts for the 2016 Honda Fit come from 8 brands — CSF, KOYORAD, FVP and 5 other brands. The "Popular" part is CSF 3925.

The Economy section: 1 option from GPD. GPD 13451C is listed in this group.

Standard Replacement: 5 parts, from CSF, KOYORAD, FVP and 2 other brands. A representative part number is CSF 3925.

7 further parts sit outside the graded sections, with the same engine-level match.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

5 Radiator Cap parts for the 2016 Honda Fit come from 4 brands — MOTORAD, GATES, CALORSTAT and 1 other brand. The "Popular" part is GATES 31412. Every part fits both the 1.5L L4 DOHC and the 1.5L L4 SOHC.

In the Locking Replacement grade, MOTORAD supplies 1 part: grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. A representative part number is MOTORAD ST37.

Standard Replacement: 4 parts, from GATES, CALORSTAT, MOTORAD and 1 other brand. A representative part number is GATES 31412.

Part numbers include GATES 31412, MOTORAD ST37 and CALORSTAT RC0040, among others listed above.

This table covers the petcocks used to drain the radiator. Read more

One part is listed for the 2016 Honda Fit — DORMAN 490216.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

7 Radiator Fan Assembly parts are listed for the 2016 Honda Fit, from GPD, DORMAN, VDO / CONTINENTAL and 3 other brands. DORMAN 621374 carries the "Popular" badge. 4 parts fit every engine; the other 3 are engine-specific.

Economy: 3 parts, from GPD and DORMAN. A representative part number is DORMAN 621374.

The Standard Replacement section: 4 options from VDO / CONTINENTAL, AGILITY, TYC and 1 other brand. VDO / CONTINENTAL FA70983 is listed in this group.

Part numbers include DORMAN 621374, GPD 2811996 and GPD 2812229, among others listed above.

This table covers the Radiator Fan motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

This group shows a single part: ACKOJA A26010027.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

6 Radiator Hose parts are listed for the 2016 Honda Fit, from GATES, DAYCO, CONTINENTAL and 1 other brand. CONTINENTAL 66679 carries the "Popular" badge. All of them fit every engine offered in the 2016 Fit.

Part numbers include CONTINENTAL 66679, GATES 24793 and ACDELCO 22934M, among others listed above.

This table covers the Radiator insulators. Read more

One part is listed for the 2016 Honda Fit — TECHPRO HO3013100.

This table covers the Radiator Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2016 Honda Fit — DORMAN 927241.

This table covers the Radiator Upper Air Baffle retainers and clips. Read more

One part is listed for the 2016 Honda Fit — DORMAN 963157D.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

13 Temperature Sender / Sensor parts for the 2016 Honda Fit come from 11 brands — STANDARD MOTOR PRODUCTS, HOLSTEIN, CALORSTAT and 8 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS TX215T. 12 parts fit every engine; the other 1 is engine-specific.

The Economy section: 6 options from HOLSTEIN, STANDARD MOTOR PRODUCTS, CALORSTAT and 2 other brands. STANDARD MOTOR PRODUCTS TX215T is listed in this group.

Standard Replacement: 7 parts, from STANDARD MOTOR PRODUCTS, WELLS, BECK/ARNLEY and 4 other brands. A representative part number is STANDARD MOTOR PRODUCTS TX215.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

6 Thermostat parts are listed for the 2016 Honda Fit, from GATES, CALORSTAT, AISIN and 3 other brands. GATES 33340S carries the "Popular" badge. All of them fit every engine offered in the 2016 Fit.

The Heavy Duty section lists 1 option from GATES — rated for severe service. GATES 33340S is listed in this group.

The Standard Replacement section: 5 options from CALORSTAT, AISIN, BECK/ARNLEY and 2 other brands. CALORSTAT TH626778 is listed in this group.

This group includes GATES 33340S, CALORSTAT TH626778 and AISIN THH018 and the remaining parts above.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2016 Honda Fit come from 2 brands — BECK/ARNLEY and FEL-PRO. Every part fits both the 1.5L L4 DOHC and the 1.5L L4 SOHC.

Part numbers include BECK/ARNLEY 0390123 and FEL-PRO 36158.

This table covers the housings and outlets the thermostat sits in. Read more

5 Thermostat Housing / Water Outlet parts are listed for the 2016 Honda Fit, from GATES, BECK/ARNLEY, FOUR SEASONS and 1 other brand. BECK/ARNLEY 1470104 carries the "Popular" badge. All of them fit every engine offered in the 2016 Fit.

This group includes BECK/ARNLEY 1470104, FOUR SEASONS 86280 and GATES CO35002 and the remaining parts above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

6 Water Pump parts are listed for the 2016 Honda Fit, from FVP, US MOTOR WORKS, BECK/ARNLEY and 2 other brands. US MOTOR WORKS US8119 carries the "Popular" badge. 5 parts fit every engine; the other 1 is engine-specific.

Economy: 3 parts, from US MOTOR WORKS, BECK/ARNLEY and FVP. A representative part number is US MOTOR WORKS US8119.

The Standard Replacement section: 3 options from GATES, FVP and GMB. GATES 42121 is listed in this group.

This group includes US MOTOR WORKS US8119 and BECK/ARNLEY 1312504 and the remaining parts above.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Water Pump Gasket parts for the 2016 Honda Fit come from 4 brands — AJUSA, ELRING, FEL-PRO and 1 other brand. 2 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: AJUSA 01238200, ELRING 165480 and FEL-PRO 36246, plus the other parts above.