2018 Honda HR-V Engine Parts

This table covers the Camshaft caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

One part is listed for the 2018 Honda HR-V — AJUSA 00794900.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2018 Honda HR-V — ELRING 459380.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts are listed for the 2018 Honda HR-V, from ENGINETECH, MAHLE / CLEVITE and TOPLINE.

This group includes ENGINETECH BB1021, MAHLE / CLEVITE CB1976A4 and TOPLINE RBH45.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 2018 Honda HR-V, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO CS26397 carries the "Popular" badge.

Listed part numbers: FEL-PRO CS26397, AJUSA 54254000 and APEX ACS1060, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts for the 2018 Honda HR-V come from 2 brands — TOPLINE and ENGINETECH.

Part numbers include ENGINETECH BC1022, TOPLINE TWH36 and TOPLINE MBH45.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 2018 Honda HR-V come from 4 brands — BCA, NATIONAL, SKF and 1 other brand.

Listed part numbers: BCA NS99315, NATIONAL 99315 and SKF 99313, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

23 Crankshaft Seal parts for the 2018 Honda HR-V come from 12 brands — ELRING, FEL-PRO, NATIONAL and 9 other brands. The "Popular" part is FEL-PRO BS40535.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 2018 Honda HR-V, from FEL-PRO, MAHLE / CLEVITE, AJUSA and 3 other brands. FEL-PRO ES72284 carries the "Popular" badge.

Listed part numbers: FEL-PRO ES72284, MAHLE / CLEVITE GS33604 and AJUSA 81041700, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts are listed for the 2018 Honda HR-V, from APEX, FEL-PRO, AJUSA and 4 other brands. APEX AHG160 carries the "Popular" badge.

This group includes APEX AHG160, FEL-PRO 26397PT and AJUSA 10176200 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 2018 Honda HR-V, from FEL-PRO, APEX, ELRING and 1 other brand. FEL-PRO HS26397PT carries the "Popular" badge.

Part numbers include FEL-PRO HS26397PT, APEX AHS1060 and ELRING 522330, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2018 Honda HR-V come from KAT'S HEATERS.

Part numbers include KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

5 Engine Cover parts are listed for the 2018 Honda HR-V, from TECHPRO and VARIOUS MFR. TECHPRO HO1228146 carries the "Popular" badge.

This group includes TECHPRO HO1228146, TECHPRO HO1228151 and TECHPRO HO1228152 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 2018 Honda HR-V, from AJUSA and TOPLINE.

This group includes AJUSA 50441800 and TOPLINE CGSH45.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 2018 Honda HR-V come from 3 brands — QUALCAST, SBI and TOPLINE.

Listed part numbers: QUALCAST 1010525, SBI 10525 and TOPLINE EVH25.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts are listed for the 2018 Honda HR-V, from ATP, DAYCO and DORMAN.

Listed part numbers: ATP 102476, DAYCO PB1726N and DORMAN 594569.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2018 Honda HR-V — ELRING 884180.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2018 Honda HR-V — STANDARD MOTOR PRODUCTS IMA141.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2018 Honda HR-V, from APEX, FEL-PRO, AJUSA and 3 other brands. APEX AMS1600 carries the "Popular" badge.

Listed part numbers: APEX AMS1600, FEL-PRO MS97035 and AJUSA 13215400, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Plenum Gasket parts for the 2018 Honda HR-V come from 3 brands — ELRING, FEL-PRO and MAHLE / CLEVITE.

This group includes ELRING B55110, FEL-PRO MS97041 and MAHLE / CLEVITE MS19712.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: TOPLINE IVH45L.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Motor Mount parts for the 2018 Honda HR-V come from 6 brands — DEA / MARMON RIDE CONTROL, FAMOUS BRAND, BECK/ARNLEY and 3 other brands. The "Popular" part is BECK/ARNLEY 1042416.

The Economy section lists 1 option from FAMOUS BRAND — the catalog's value-priced group. FAMOUS BRAND 2010670238 is listed in this group.

In the Standard Replacement grade, DEA / MARMON RIDE CONTROL, BECK/ARNLEY, ANCHOR and 2 other brands supply 6 parts: built to original-equipment specification. A representative part number is BECK/ARNLEY 1042416.

This group includes BECK/ARNLEY 1042416, FAMOUS BRAND 2010670238 and DEA / MARMON RIDE CONTROL A65064 and the remaining parts above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2018 Honda HR-V come from ANCHOR.

Part numbers include ANCHOR 300460 and ANCHOR 300459.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

35 Oil parts for the 2018 Honda HR-V come from 5 brands — LIQUI MOLY, VALVOLINE, MOBIL and 2 other brands. The "Popular" part is LIQUI MOLY 22044. Grades run from Full Synthetic through High Mileage (>75,000 Miles); Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 2 other brands.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2018 Honda HR-V come from 2 brands — AUTOTECNICA and DORMAN.

Listed part numbers: AUTOTECNICA HA1423353 and DORMAN 921069.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts for the 2018 Honda HR-V come from 4 brands — DORMAN, ELRING, REIN and 1 other brand. The "Popular" part is DORMAN 090033.

Listed part numbers: DORMAN 090033, DORMAN 090053 and DORMAN 092020, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts are listed for the 2018 Honda HR-V, from DORMAN, FEL-PRO, AJUSA and 3 other brands. DORMAN 095144 carries the "Popular" badge.

Listed part numbers: DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2018 Honda HR-V come from 4 brands — CALORSTAT, DORMAN, GATES and 1 other brand.

Listed part numbers: CALORSTAT OC2335, DORMAN 80985 and GATES 31284, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2018 Honda HR-V come from 15 brands — BOSCH, VARIOUS MFR, WIX and 12 other brands. The "Popular" part is WIX 57356XP.

The Economy section: 6 options from BOSCH, FRAM, FVP and 3 other brands. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57356XP is listed in this group.

Standard Replacement: 10 parts, from BOSCH, DENSO, WIX and 7 other brands. A representative part number is BOSCH 3323.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2018 Honda HR-V — FEL-PRO ES71858.

This table covers the Oil Filter Support tubes. Read more

One part is listed for the 2018 Honda HR-V — AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts are listed for the 2018 Honda HR-V, from AUTOTECNICA, DORMAN, SKP and 1 other brand.

Part numbers include AUTOTECNICA HA1416278, DORMAN 264167 and SKP SKHOP35A, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO 73196.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

4 Oil Pump parts for the 2018 Honda HR-V come from 4 brands — SKP, ULTRA-POWER, MELLING and 1 other brand.

The Economy section: 2 options from SKP and ULTRA-POWER. SKP SKM532 is listed in this group.

Standard Replacement: 1 part, from MELLING. A representative part number is MELLING M532.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include SKP SKM532 and ULTRA-POWER M532, among others listed above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts are listed for the 2018 Honda HR-V, from MAHLE / CLEVITE and TOPLINE.

The Premium section lists 1 option from MAHLE / CLEVITE — a step above OE specification in materials, tolerances or warranty terms. MAHLE / CLEVITE 2243995 is listed in this group.

The Standard Replacement section: 1 option from TOPLINE. TOPLINE PAH45 is listed in this group.

Part numbers include MAHLE / CLEVITE 2243995 and TOPLINE PAH45.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: TOPLINE PBTO39.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 2018 Honda HR-V — TOPLINE RSH45.

This table covers the Timing Belt & component kits. Read more

This group shows a single part: ITM ENGINE COMPONENTS 05394386.

This table covers the Timing Cam sprockets. Read more

5 Timing Cam Sprocket parts for the 2018 Honda HR-V come from 5 brands — CLOYES, FVP, INA and 2 other brands. The "Popular" part is CLOYES S992T.

This group includes CLOYES S992T and INA ZSS992T and the remaining parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts are listed for the 2018 Honda HR-V, from MELLING, CLOYES, FVP and 2 other brands. MELLING 1035 carries the "Popular" badge.

Part numbers include MELLING 1035 and CLOYES C743, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

13 Timing Chain & Component Kit parts for the 2018 Honda HR-V come from 7 brands — S.A. GEAR, ITM ENGINE COMPONENTS, ULTRA-POWER and 4 other brands. The "Popular" part is S.A. GEAR 76257.

The Economy section: 7 options from S.A. GEAR, ITM ENGINE COMPONENTS, ULTRA-POWER and 1 other brand. S.A. GEAR 76257 is listed in this group.

Standard Replacement: 6 parts, from CLOYES, MELLING and INA. A representative part number is CLOYES 90743S.

This table covers the guides and dampers that keep the timing chain on its path. Read more

8 Timing Chain Guide / Damper parts are listed for the 2018 Honda HR-V, from MELLING, CLOYES, INA and 1 other brand. MELLING BG5080 carries the "Popular" badge.

Listed part numbers: MELLING BG5080, MELLING BT5106 and CLOYES 95727, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts for the 2018 Honda HR-V come from 5 brands — INA, MELLING, S.A. GEAR and 2 other brands. The "Popular" part is MELLING BT5105.

Part numbers include MELLING BT5105, S.A. GEAR 91105 and CLOYES 95726, among others listed above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Timing Cover Gasket parts for the 2018 Honda HR-V come from 2 brands — ELRING and MAHLE / CLEVITE.

Listed part numbers: ELRING 703520 and MAHLE / CLEVITE JV5153.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts for the 2018 Honda HR-V come from 2 brands — SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SR3502 and SKF 99182.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 2018 Honda HR-V come from 2 brands — MAHLE / CLEVITE and SKF.

This group includes MAHLE / CLEVITE 68064 and SKF 16896.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

5 Timing Crank Sprocket parts for the 2018 Honda HR-V come from 5 brands — MELLING, CLOYES, FVP and 2 other brands. The "Popular" part is MELLING S1287.

Part numbers include MELLING S1287 and CLOYES S1007, among others listed above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Torque Strut Mount parts are listed for the 2018 Honda HR-V, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 9863 carries the "Popular" badge.

This table covers the Valve covers. Read more

5 Valve Cover parts are listed for the 2018 Honda HR-V, from ACKOJA, APEX, BECK/ARNLEY and 2 other brands. ACKOJA A260325 carries the "Popular" badge.

Part numbers include ACKOJA A260325, APEX VCS160 and BECK/ARNLEY 0360041, among others listed above.