1952 Hudson Pacemaker Ignition Parts

Engine:
3.8L 232cid L6

The 1952 Hudson Pacemaker has 19 ignition parts with verified fitment on this page — 7 part types and 9 brands, covering the 3.8L 232cid L6 engine. Each part includes a manufacturer part number and application notes.

On the 1952 Hudson Pacemaker, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Ignition Coil (6 parts), Spark Plug (5 parts) and Condenser / Capacitor (2 parts). The other 4 part types cover the remaining 6 parts.

Condenser / Capacitor

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS AL111T
🇺🇸 US
T-Series
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WELLS 5H1018
🇺🇸 US
Heavy Duty
View on
Amazon

This table covers the capacitors used in this electrical or A/C circuit.

Distributor Cap

Premium

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL496LG
🇺🇸 US
Body Material: PhenolicBlack Brass
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS AL138
🇺🇸 US
View on
Amazon

This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Distributor Rotor

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL152LG
🇺🇸 US
PremiumBlack Brass
View on
Amazon
STANDARD MOTOR PRODUCTS AL152
🇺🇸 US
View on
Amazon

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC14T
🇺🇸 US
T-Series6 Volt
View on
Amazon
HOLSTEIN 2IGC0057
🇺🇸 US
View on
Amazon
SPECTRA PREMIUM C660
🇺🇸 US
Pack
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC14
🇺🇸 US
Blue Streak6 Volt
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
UNITED MOTOR PRODUCTS C14
🇺🇸 US
View on
Amazon
WELLS 5C1063
🇺🇸 US
Fits most cars, trucks, tractors & industrial engs6 Volt (Universal Coil) used with external resistor or where resistance wire is an internal part of wiring harness.
Fitment notes — WELLS 5C1063
Fits:
most cars, trucks, tractors & industrial engs6 Volt (Universal Coil) used with external resistor or where resistance wire is an internal part of wiring harness.
6 VOLT
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Coil Mounting Bracket

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS CB6
🇺🇸 US
View on
Amazon

This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.

Ignition Conversion Kit

Brand Part Number Markets Notes Buy
WELLS 1A4108
🇺🇸 US
with Autolite Distributor # IAT12 Volt
Fitment notes — WELLS 1A4108
with Autolite Distributor # IAT12 VoltNegative Ground
View on
Amazon

This table covers the Ignition Conversion kits.

Spark Plug

Summary: Notes include pre-set gaps of 0.030" and 0.032". Replacement brands in this table include CHAMPION, MOTORCRAFT and ACDELCO.

Brand Part Number Markets Notes Buy
CHAMPION Popular 844
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 844
Copper PlusPre-Set Gap: 0.03"
OE-Recommended Gap: 0.032"
View on
Amazon
ACDELCO C45L
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO C45L
ProfessionalConventionalPre-Set Gap: 0.030"
Original Equipment-Recommended Gap: .032
View on
Amazon
CHAMPION 8441
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 8441
Copper Plus
OE-Recommended Gap: 0.032"
View on
Amazon
MOTORCRAFT SP473A
🇺🇸 US
Copper Non-Resistor
Fitment notes — MOTORCRAFT SP473A
Copper Non-Resistor
OE Style.032"/0.8mm
View on
Amazon
MOTORCRAFT SP473AX
🇺🇸 US
Copper Non-Resistor
Fitment notes — MOTORCRAFT SP473AX
Copper Non-Resistor
OE Style.032"/0.8mm
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1952 Hudson Pacemaker

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 3.8L 232cid L6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Spark Plug .

Frequently Asked Questions

How many ignition parts fit the 1952 Hudson Pacemaker?

Our catalog currently lists 19 ignition parts for the 1952 Hudson Pacemaker across 7 subcategories and 9 brands, covering the 3.8L 232cid L6 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1952 Hudson Pacemaker?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1952 Hudson Pacemaker?

Notes on this page include pre-set gaps of 0.030" and 0.032". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1952 Hudson Pacemaker was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1952 Hudson Pacemaker?

Every part on this page is matched to the 3.8L 232cid L6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1952 Hudson Pacemaker

Ignition Parts for Other Hudson Pacemaker Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.