7 Steering parts are listed for the 1954 Hudson Wasp, in 3 part types, covering both the 3.8L 232cid L6 and the 4.3L 262cid L6. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1954 Hudson Wasp, the steering system connects driver to road through the rack, pump, tie rods, and column components. All 7 listed parts are Power Steering Fluid (4 parts), Steering Gear (2 parts) and Power Steering Control Valve (1 part).
The 1954 Hudson Wasp was sold with both the 3.8L 232cid L6 and the 4.3L 262cid L6. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
2 brands supply steering parts for the 1954 Hudson Wasp, led by LUBEGARD (4 parts) and LARES (3 parts).
Each part number listed for the 1954 Hudson Wasp opens a page with every vehicle that part fits.
Power Steering Control Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LARES Fits: 4.3L 262cid L6 | 94 | 🇺🇸 US | Remanufactured | View on Amazon |
This table covers the Power Steering Control valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
One part is listed for the 1954 Hudson Wasp — LARES 94.
Power Steering Fluid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUBEGARD Fits: 4.3L 262cid L6 | 23201 | 🇺🇸 US | 1 QuartSynthetic Power Steering Fluid | View on Amazon |
| LUBEGARD Fits: 4.3L 262cid L6 | 23205 | 🇺🇸 US | 5 GallonSynthetic Power Steering Fluid | View on Amazon |
| LUBEGARD Fits: 4.3L 262cid L6 | 23232 | 🇺🇸 US | Synthetic Power Steering Fluid1 Quart | View on Amazon |
| LUBEGARD Fits: 4.3L 262cid L6 | 23255 | 🇺🇸 US | 55 GallonSynthetic Power Steering Fluid | View on Amazon |
This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
4 Power Steering Fluid parts for the 1954 Hudson Wasp come from LUBEGARD.
Listed part numbers: LUBEGARD 23201, LUBEGARD 23205 and LUBEGARD 23232, plus the other parts above.
Steering Gear
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LARES Fits: 4.3L 262cid L6 | 8442 | 🇺🇸 US | Remanufactured | View on Amazon |
| LARES Fits: 4.3L 262cid L6 | 8443 | 🇺🇸 US | Remanufactured | View on Amazon |
This table covers the Steering gears.
2 Steering Gear parts for the 1954 Hudson Wasp come from LARES.
Listed part numbers: LARES 8442 and LARES 8443.
Buying Steering Parts for a 1954 Hudson Wasp
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- Match the engine first. Every steering part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Power Steering Fluid and Steering Gear .
Frequently Asked Questions
How many steering parts fit the 1954 Hudson Wasp?
Our catalog currently lists 7 steering parts for the 1954 Hudson Wasp across 3 subcategories and 2 brands, covering both the 3.8L 232cid L6 and the 4.3L 262cid L6. Each part is matched to the engine(s) it fits.
Do steering parts differ between 1954 Hudson Wasp engines?
Yes. Every steering part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of steering problems on a 1954 Hudson Wasp?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1954 Hudson Wasp was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1954 Hudson Wasp?
First match the engine — each row shows which engine(s) the part fits. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1954 Hudson Wasp
Steering Parts for Other Hudson Wasp Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.