1956 Hudson Wasp Ignition Parts

Engine:
3.3L 202cid L6

The 1956 Hudson Wasp has 26 ignition parts with verified fitment on this page — 7 part types and 10 brands, covering the 3.3L 202cid L6 engine. Each part includes a manufacturer part number and application notes.

The ignition system on the 1956 Hudson Wasp delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Ignition Coil (8 parts), Spark Plug (5 parts) and Distributor Cap (4 parts). The other 4 part types cover the remaining 9 parts.

Condenser / Capacitor

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS AL111T
🇺🇸 US
T-Series
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WELLS 5H1018
🇺🇸 US
Heavy Duty
View on
Amazon
WELLS 5H1099
🇺🇸 US
Standard Duty
View on
Amazon

This table covers the capacitors used in this electrical or A/C circuit.

Distributor Cap

Premium

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL496LG
🇺🇸 US
Body Material: PhenolicBlack Brass
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL138LG
🇺🇸 US
Color: BlackBody Material: Phenolic
Fitment notes — LILAND GLOBAL AL138LG
Color: BlackBody Material: PhenolicContact Material: Aluminum
View on
Amazon
STANDARD MOTOR PRODUCTS AL138
🇺🇸 US
View on
Amazon
WELLS 5D1063
🇺🇸 US
View on
Amazon

This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Distributor Rotor

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL152LG
🇺🇸 US
PremiumBlack Brass
View on
Amazon
STANDARD MOTOR PRODUCTS AL152
🇺🇸 US
View on
Amazon

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.

Ignition Breaker Points

Brand Part Number Markets Notes Buy
WELLS 4P1012
🇺🇸 US
View on
Amazon

This table covers the breaker points in a points-type distributor.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC15T
🇺🇸 US
T-Series
View on
Amazon
FVP UC15F
🇺🇸 US
View on
Amazon
HOLSTEIN 2IGC0058
🇺🇸 US
View on
Amazon
SKP SKUC15T
🇺🇸 US
Coil Pack
View on
Amazon
SPECTRA PREMIUM C622
🇺🇸 US
Pack
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC15
🇺🇸 US
View on
Amazon
UNITED MOTOR PRODUCTS C15
🇺🇸 US
View on
Amazon
WELLS 5C1019
🇺🇸 US
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.03" and 0.032". Replacement brands in this table include CHAMPION and MOTORCRAFT.

Brand Part Number Markets Notes Buy
CHAMPION Popular 844
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 844
Copper PlusPre-Set Gap: 0.03"
Non-Resistor TypeOE-Recommended Gap: 0.032"
View on
Amazon
CHAMPION 854
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 854
Copper PlusPre-Set Gap: 0.03"
Resistor TypeOE-Recommended Gap: 0.032"
View on
Amazon
CHAMPION 8441
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 8441
Copper Plus
Non-Resistor TypeOE-Recommended Gap: 0.032"
View on
Amazon
MOTORCRAFT SP473A
🇺🇸 US
Copper Non-Resistor
Fitment notes — MOTORCRAFT SP473A
Copper Non-Resistor
OE Style.032"/0.8mm
View on
Amazon
MOTORCRAFT SP473AX
🇺🇸 US
Copper Non-Resistor
Fitment notes — MOTORCRAFT SP473AX
Copper Non-Resistor
OE Style.032"/0.8mm
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Spark Plug Wire

Premium

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS 3600
🇺🇸 US
SetCore Material: Suppression Core
Fitment notes — STANDARD MOTOR PRODUCTS 3600
SetCore Material: Suppression CoreStandard® Premium
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS 23600
🇺🇸 US
Pro SeriesSet
Fitment notes — STANDARD MOTOR PRODUCTS 23600
Pro SeriesSetCore Material: Suppression Core
View on
Amazon
UNITED MOTOR PRODUCTS 661
🇺🇸 US
SetPermashield-Delcore
View on
Amazon

This table covers the Spark Plug wires.

Buying Ignition Parts for a 1956 Hudson Wasp

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 3.3L 202cid L6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Spark Plug .

Frequently Asked Questions

How many ignition parts fit the 1956 Hudson Wasp?

Our catalog currently lists 26 ignition parts for the 1956 Hudson Wasp across 7 subcategories and 10 brands, covering the 3.3L 202cid L6 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1956 Hudson Wasp?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1956 Hudson Wasp?

Notes on this page include pre-set gaps of 0.03" and 0.032". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1956 Hudson Wasp was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1956 Hudson Wasp?

Every part on this page is matched to the 3.3L 202cid L6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1956 Hudson Wasp

Ignition Parts for Other Hudson Wasp Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.