11 Ignition parts are listed for the 1949 Humber Super Snipe, in 4 part types, covering the 4.1L 249cid L6 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The ignition system on the 1949 Humber Super Snipe delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Ignition Coil (6 parts), Spark Plug (3 parts) and Ignition Coil Mounting Bracket (1 part). The other 1 part type covers the remaining 1 part.
Every part on this page is matched to the 4.1L 249cid L6 — the only engine offered in the 1949 Humber Super Snipe.
The most listed brands for 1949 Humber Super Snipe ignition parts are STANDARD MOTOR PRODUCTS (3 parts), WELLS (2 parts) and FVP (1 part), plus 5 more brands. Quality grades include Economy and Standard Replacement.
2 parts on this 1949 Humber Super Snipe page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including STANDARD MOTOR PRODUCTS UC15T (Ignition Coil) and STANDARD MOTOR PRODUCTS UC15 (Ignition Coil). Click any part number to see every vehicle that part fits.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | UC15T | 🇺🇸 US | T-Series | View on Amazon |
| FVP | UC15F | 🇺🇸 US | View on Amazon | |
| HOLSTEIN | 2IGC0058 | 🇺🇸 US | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | UC15 | 🇺🇸 US | View on Amazon | |
| UNITED MOTOR PRODUCTS | C15 | 🇺🇸 US | View on Amazon | |
| WELLS | 5C1019 | 🇺🇸 US | Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
6 Ignition Coil parts are listed for the 1949 Humber Super Snipe, from STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 2 other brands. STANDARD MOTOR PRODUCTS UC15T carries the "Popular" badge.
In the Economy grade, STANDARD MOTOR PRODUCTS, FVP and HOLSTEIN supply 3 parts: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS UC15T.
The Standard Replacement section lists 3 options from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS — built to original-equipment specification. STANDARD MOTOR PRODUCTS UC15 is listed in this group.
This group includes STANDARD MOTOR PRODUCTS UC15T, FVP UC15F and HOLSTEIN 2IGC0058 and the remaining parts above.
Ignition Coil Mounting Bracket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | CB6 | 🇺🇸 US | View on Amazon |
This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.
This group shows a single part: STANDARD MOTOR PRODUCTS CB6.
Ignition Conversion Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS | 1A4230 | 🇺🇸 US | Lucas Distributor # DVXH6A, Lobe Sensor Module, with Counter Clockwise Rotation12 Volt | View on Amazon |
This table covers the Ignition Conversion kits.
This group shows a single part: WELLS 1A4230.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO | R44F | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| AUTOLITE | 425 | 🇺🇸 US | Center Electrode Projection: Short ProjectionCopper Resistor | View on Amazon |
| CHAMPION | 896 | 🇺🇸 US | Copper Plus | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
3 Spark Plug parts for the 1949 Humber Super Snipe come from 3 brands — ACDELCO, AUTOLITE and CHAMPION.
Part numbers include ACDELCO R44F, AUTOLITE 425 and CHAMPION 896.
Buying Ignition Parts for a 1949 Humber Super Snipe
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 4.1L 249cid L6 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Spark Plug .
Frequently Asked Questions
How many ignition parts fit the 1949 Humber Super Snipe?
Our catalog currently lists 11 ignition parts for the 1949 Humber Super Snipe across 4 subcategories and 8 brands, covering the 4.1L 249cid L6 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1949 Humber Super Snipe?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1949 Humber Super Snipe?
Notes on this page include pre-set gaps of 0.025" and 0.030". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1949 Humber Super Snipe was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1949 Humber Super Snipe?
Every part on this page is matched to the 4.1L 249cid L6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1949 Humber Super Snipe
Ignition Parts for Other Humber Super Snipe Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.