This page lists 11 ignition parts for the 1953 Humber Super Snipe, across 5 part types, covering the 4.1L L6 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 1953 Humber Super Snipe, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 9 parts of the 11 listed are Spark Plug (7 parts), Distributor Rotor (1 part) and Ignition Breaker Points (1 part). The other 2 part types cover the remaining 2 parts.
The 1953 Humber Super Snipe came with a single engine, the 4.1L L6, and every part is verified against it.
5 brands supply ignition parts for the 1953 Humber Super Snipe, led by CHAMPION (4 parts), STANDARD MOTOR PRODUCTS (3 parts) and ACDELCO (2 parts), plus 2 more brands. Quality grades include Copper / Nickel, Double Platinum and Iridium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1953 Humber Super Snipe. 2 parts have it, including ACDELCO R44F (Spark Plug) and CHAMPION 9804 (Spark Plug). Each part number opens a page with every vehicle that part fits.
Distributor Rotor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU302 | 🇺🇸 US | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
One part is listed for the 1953 Humber Super Snipe — STANDARD MOTOR PRODUCTS LU302.
Ignition Breaker Points
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU1316 | 🇺🇸 US | View on Amazon |
This table covers the breaker points in a points-type distributor.
This group shows a single part: STANDARD MOTOR PRODUCTS LU1316.
Ignition Coil Mounting Bracket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | CB6 | 🇺🇸 US | View on Amazon |
This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.
One part is listed for the 1953 Humber Super Snipe — STANDARD MOTOR PRODUCTS CB6.
Ignition Conversion Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS | 1A4230 | 🇺🇸 US | Lucas Distributor # DVXH6A, Lobe Sensor Module, with Counter Clockwise Rotation12 Volt | View on Amazon |
This table covers the Ignition Conversion kits.
One part is listed for the 1953 Humber Super Snipe — WELLS 1A4230.
Spark Plug
Summary: Notes include pre-set gaps of 0.025", 0.030" and 0.035". Replacement brands in this table include CHAMPION, ACDELCO and AUTOLITE.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular | R44F | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| AUTOLITE | 425 | 🇺🇸 US | Center Electrode Projection: Short ProjectionCopper Resistor | View on Amazon |
| CHAMPION | 315 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION | 332 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION | 3321 | 🇺🇸 US | Copper Plus | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO | 41804 | 🇺🇸 US 🇨🇦 CA | ProfessionalDouble Platinum | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION Popular | 9804 | 🇺🇸 US | IridiumPre-Set Gap: 0.03" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
7 Spark Plug parts are listed for the 1953 Humber Super Snipe, from CHAMPION, ACDELCO and AUTOLITE. ACDELCO R44F carries the "Popular" badge.
In the Copper / Nickel grade, CHAMPION, ACDELCO and AUTOLITE supply 5 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO R44F.
In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, ACDELCO supplies 1 part: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 41804.
The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 1 option from CHAMPION — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. CHAMPION 9804 is listed in this group.
Listed part numbers: ACDELCO R44F, AUTOLITE 425 and CHAMPION 315, plus the other parts above.
Buying Ignition Parts for a 1953 Humber Super Snipe
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 4.1L L6 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Distributor Rotor .
Frequently Asked Questions
How many ignition parts fit the 1953 Humber Super Snipe?
Our catalog currently lists 11 ignition parts for the 1953 Humber Super Snipe across 5 subcategories and 5 brands, covering the 4.1L L6 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1953 Humber Super Snipe?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1953 Humber Super Snipe?
Notes on this page include pre-set gaps of 0.025", 0.030" and 0.035". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1953 Humber Super Snipe was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1953 Humber Super Snipe?
Every part on this page is matched to the 4.1L L6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1953 Humber Super Snipe
Ignition Parts for Other Humber Super Snipe Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.