The 1961 Humber Hawk has 7 steering parts with verified fitment on this page — 2 part types and 4 brands, covering the 2.3L L4 engine. Each part includes a manufacturer part number and application notes.
On the 1961 Humber Hawk, the steering system connects driver to road through the rack, pump, tie rods, and column components. All 7 listed parts are Power Steering Fluid (4 parts) and Power Steering Pump Shaft Bearing (3 parts).
The 1961 Humber Hawk came with a single engine, the 2.3L L4, and every part is verified against it.
4 brands supply steering parts for the 1961 Humber Hawk, led by LUBEGARD (4 parts), WJB / INMOTION PARTS (1 part) and BCA (1 part), plus 1 more brand. Quality grades include Standard Replacement and Economy.
Each part number listed for the 1961 Humber Hawk opens a page with every vehicle that part fits.
Power Steering Fluid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUBEGARD | 23201 | 🇺🇸 US | 1 QuartSynthetic Power Steering Fluid | View on Amazon |
| LUBEGARD | 23205 | 🇺🇸 US | 5 GallonSynthetic Power Steering Fluid | View on Amazon |
| LUBEGARD | 23232 | 🇺🇸 US | Synthetic Power Steering Fluid1 Quart | View on Amazon |
| LUBEGARD | 23255 | 🇺🇸 US | 55 GallonSynthetic Power Steering Fluid | View on Amazon |
This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
4 Power Steering Fluid parts for the 1961 Humber Hawk come from LUBEGARD.
Listed part numbers: LUBEGARD 23201, LUBEGARD 23205 and LUBEGARD 23232, plus the other parts above.
Power Steering Pump Shaft Bearing
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS | RB6203 | 🇺🇸 US | U/K Steering System | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA | NB203 | 🇺🇸 US | View on Amazon | |
| NATIONAL | 203 | 🇺🇸 US | View on Amazon |
This table covers the Power Steering Pump Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Power Steering Pump Shaft Bearing parts for the 1961 Humber Hawk come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.
The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB6203 is listed in this group.
In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NB203.
Listed part numbers: WJB / INMOTION PARTS RB6203, BCA NB203 and NATIONAL 203.
Buying Steering Parts for a 1961 Humber Hawk
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- Confirm you have the 2.3L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Power Steering Fluid and Power Steering Pump Shaft Bearing .
Frequently Asked Questions
How many steering parts fit the 1961 Humber Hawk?
Our catalog currently lists 7 steering parts for the 1961 Humber Hawk across 2 subcategories and 4 brands, covering the 2.3L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of steering problems on a 1961 Humber Hawk?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1961 Humber Hawk was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1961 Humber Hawk?
Every part on this page is matched to the 2.3L L4 engine. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1961 Humber Hawk
Steering Parts for Other Humber Hawk Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.