1965 Humber Hawk Ignition Parts

Engine:
2.3L L4

This page lists 27 ignition parts for the 1965 Humber Hawk, across 7 part types, covering the 2.3L L4 engine. Every part shows its brand, manufacturer part number and fitment notes.

The ignition system on the 1965 Humber Hawk delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Ignition Coil (9 parts), Spark Plug (9 parts) and Condenser / Capacitor (2 parts). The other 4 part types cover the remaining 7 parts.

Condenser / Capacitor

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS LU206T
🇺🇸 US
T-Series
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS LU206
🇺🇸 US
View on
Amazon

This table covers the capacitors used in this electrical or A/C circuit.

Distributor Cap

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS LU429
🇺🇸 US
View on
Amazon
WELLS 5D1039
🇺🇸 US
View on
Amazon

This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Ignition Breaker Points

Brand Part Number Markets Notes Buy
FACET 14683MHDV
🇺🇸 US
View on
Amazon
STANDARD MOTOR PRODUCTS LU1617P
🇺🇸 US
View on
Amazon

This table covers the breaker points in a points-type distributor.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC15T
🇺🇸 US
T-Series
View on
Amazon
FVP UC15F
🇺🇸 US
View on
Amazon
HOLSTEIN 2IGC0058
🇺🇸 US
View on
Amazon
SKP SKUC15T
🇺🇸 US
Coil Pack
View on
Amazon
SPECTRA PREMIUM C622
🇺🇸 US
Pack
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
NGK Popular 48863
🇺🇸 US
Connections May be Eyelet or Spade
View on
Amazon
STANDARD MOTOR PRODUCTS UC15
🇺🇸 US
View on
Amazon
UNITED MOTOR PRODUCTS C15
🇺🇸 US
View on
Amazon
WELLS 5C1019
🇺🇸 US
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Coil Mounting Bracket

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS CB6
🇺🇸 US
View on
Amazon

This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.

Ignition Conversion Kit

Brand Part Number Markets Notes Buy
WELLS 1A4147
🇺🇸 US
with Lucas Distributor # 25D412 Volt
Fitment notes — WELLS 1A4147
with Lucas Distributor # 25D412 VoltNegative Ground
View on
Amazon
WELLS 1A4222
🇺🇸 US
with Lucas Distributor # 25D412 Volt
Fitment notes — WELLS 1A4222
with Lucas Distributor # 25D412 Voltwith Positive Ground
View on
Amazon

This table covers the Ignition Conversion kits.

Spark Plug

Summary: Notes include pre-set gaps of 0.025", 0.032", 0.033", 0.035" and 0.039". Replacement brands in this table include CHAMPION, ACDELCO and MOTORCRAFT.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular R44XLS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R44XLS
ProfessionalConventionalPre-Set Gap: 0.039"
Original Equipment-Recommended Gap: .025
View on
Amazon
CHAMPION Popular 404
🇺🇸 US
Copper PlusPre-Set Gap: 0.035"
Fitment notes — CHAMPION 404
Copper PlusPre-Set Gap: 0.035"
OE-Recommended Gap: 0.025"Resistor Plug
View on
Amazon
CHAMPION 38
🇺🇸 US
Copper PlusPre-Set Gap: 0.032"
Fitment notes — CHAMPION 38
Copper PlusPre-Set Gap: 0.032"
Non-Resistor TypeOE TypeOE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION 4041
🇺🇸 US
Copper PlusClassification: Champion Copper Plus
Fitment notes — CHAMPION 4041
Copper PlusClassification: Champion Copper Plus
OE-Recommended Gap: 0.025"Resistor Plug
View on
Amazon
MOTORCRAFT SP416A
🇺🇸 US
Copper
Fitment notes — MOTORCRAFT SP416A
Copper
OE Style.025"/0.6mm
View on
Amazon
MOTORCRAFT SP416X
🇺🇸 US
Copper
Fitment notes — MOTORCRAFT SP416X
Copper
OE Style.025"/0.6mm
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO 41828
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41828
ProfessionalDouble PlatinumPre-Set Gap: 0.033"
OE-Recommended Gap: 0.025" (IN)
View on
Amazon
CHAMPION 7322
🇺🇸 US
Double Platinum PowerPre-Set Gap: 0.032"
Fitment notes — CHAMPION 7322
Double Platinum PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025"
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
CHAMPION 3405
🇺🇸 US
Platinum PowerPlug Type: RN14PMC
Fitment notes — CHAMPION 3405
Platinum PowerPlug Type: RN14PMCPre-Set Gap: 0.035"
OE-Recommended Gap: 0.025"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1965 Humber Hawk

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 2.3L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Spark Plug .

Frequently Asked Questions

How many ignition parts fit the 1965 Humber Hawk?

Our catalog currently lists 27 ignition parts for the 1965 Humber Hawk across 7 subcategories and 12 brands, covering the 2.3L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1965 Humber Hawk?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1965 Humber Hawk?

Notes on this page include pre-set gaps of 0.025", 0.032", 0.033", 0.035" and 0.039". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1965 Humber Hawk was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1965 Humber Hawk?

Every part on this page is matched to the 2.3L L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1965 Humber Hawk

Ignition Parts for Other Humber Hawk Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.