2000 Hummer H1 Drivetrain Parts

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2000 Hummer H1 — AAM 40007173.

This table covers the Axle Intermediate Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: AAM 26041516.

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2000 Hummer H1 — TIMKEN 207.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

5 CV Axle parts for the 2000 Hummer H1 come from 2 brands — GSP and TOP NOTCH. The "Popular" part is GSP NCV82999.

Listed part numbers: GSP NCV82999, GSP NCV82074 and GSP NCV82075, plus the other parts above.

This table covers the adjusters that set differential bearing preload. Read more

This group shows a single part: AAM 26045211.

This table covers the carriers that hold the differential gears in the axle. Read more

3 Differential Carrier parts for the 2000 Hummer H1 come from 2 brands — AAM and DANA.

This group includes AAM 14012695, AAM 40035046 and DANA DS27217.

This table covers the bearings and races that support the differential carrier. Read more

12 Differential Carrier Bearing / Race parts for the 2000 Hummer H1 come from 7 brands — SCHAEFFLER, SKF, WJB / INMOTION PARTS and 4 other brands. The "Popular" part is WJB / INMOTION PARTS WTA36.

The Economy section lists 2 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTA36 is listed in this group.

In the Standard Replacement grade, SCHAEFFLER, SKF, ACDELCO and 3 other brands supply 10 parts: built to original-equipment specification. A representative part number is ACDELCO A36.

This table covers the Differential Carrier shims. Read more

One part is listed for the 2000 Hummer H1 — MOTIVE GEAR 1130.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Differential Cover Gasket parts for the 2000 Hummer H1 come from 4 brands — FEL-PRO, MAHLE / CLEVITE, MOTIVE GEAR and 1 other brand.

Part numbers include FEL-PRO RDS13889, MAHLE / CLEVITE P37830 and MOTIVE GEAR 5120, among others listed above.

This table covers the Differential Crush sleeves. Read more

One part is listed for the 2000 Hummer H1 — AAM 14012691.

This table covers the Differential Gear Installation kits. Read more

One part is listed for the 2000 Hummer H1 — MOTIVE GEAR AM20IK.

This table covers the bearings and races on the differential pinion. Read more

28 Differential Pinion Bearing / Race parts are listed for the 2000 Hummer H1, from SKF, BCA, SCHAEFFLER and 4 other brands. WJB / INMOTION PARTS WTM88048 carries the "Popular" badge. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 19 parts.

This table covers the baffles that control oil at the pinion bearings. Read more

3 Differential Pinion Bearing Baffle parts are listed for the 2000 Hummer H1, from MOTIVE GEAR and RICHMOND.

Part numbers include MOTIVE GEAR 4105, MOTIVE GEAR 4104 and RICHMOND 0400111.

This table covers the flanges that connect the driveshaft to the differential pinion. Read more

This group shows a single part: AAM 40025925.

This table covers the Differential Pinion nuts. Read more

This group shows a single part: MOTIVE GEAR 379570S.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

This group shows a single part: NATIONAL 99193.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Differential Pinion Seal parts for the 2000 Hummer H1 come from 5 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 2 other brands. The "Popular" part is WJB / INMOTION PARTS WS470331N.

Part numbers include WJB / INMOTION PARTS WS470331N, BCA NS470331N and NATIONAL 470331N, among others listed above.

This table covers the Differential Pinion Shaft Lock bolts. Read more

One part is listed for the 2000 Hummer H1 — MOTIVE GEAR 305105S.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

3 Differential Rebuild Kit parts are listed for the 2000 Hummer H1, from AAM, MOTIVE GEAR and TIMKEN.

Part numbers include AAM 74067005, MOTIVE GEAR R20RH and TIMKEN DRK311J.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

7 Differential Ring and Pinion parts for the 2000 Hummer H1 come from 4 brands — AAM, RICHMOND, MOTIVE GEAR and 1 other brand. The "Popular" part is MOTIVE GEAR AM20.

The Economy section: 1 option from RICHMOND. RICHMOND AM20 is listed in this group.

Standard Replacement: 6 parts, from AAM, MOTIVE GEAR and USA STANDARD GEAR. A representative part number is MOTIVE GEAR AM20.

Listed part numbers: MOTIVE GEAR AM20 and AAM 40058536, plus the other parts above.

This table covers the Differential Ring Gear bolts. Read more

2 Differential Ring Gear Bolt parts for the 2000 Hummer H1 come from 2 brands — AAM and MOTIVE GEAR.

Listed part numbers: AAM 14012703 and MOTIVE GEAR D8OZ4216B.

This table covers the Differential Spider gears. Read more

2 Differential Spider Gear parts for the 2000 Hummer H1 come from 2 brands — AAM and MOTIVE GEAR.

Listed part numbers: AAM 74047037 and MOTIVE GEAR 8127092.

This table covers the spools that lock the differential side gears together. Read more

One part is listed for the 2000 Hummer H1 — DANA 2022500.

This table covers the Differential washers. Read more

2 Differential Washer parts for the 2000 Hummer H1 come from MOTIVE GEAR.

Part numbers include MOTIVE GEAR C9OZ4230A and MOTIVE GEAR C9OZ4228A.

This table covers the Drive Shaft Center Support bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Drive Shaft Center Support Bushing parts are listed for the 2000 Hummer H1, from ATP and PIONEER.

Part numbers include ATP JB51 and PIONEER 755068.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

18 Gear Oil parts for the 2000 Hummer H1 come from 3 brands — VALVOLINE, LUCAS OIL and ACDELCO. The "Popular" part is VALVOLINE VV820.

The SAE 75W-90 section lists 11 options from VALVOLINE, LUCAS OIL and ACDELCO — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. VALVOLINE VV820 is listed in this group.

The SAE 80W-90 section lists 7 options from VALVOLINE and LUCAS OIL — grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. LUCAS OIL 10043 is listed in this group.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

14 Transfer Case Fluid parts for the 2000 Hummer H1 come from 2 brands — VALVOLINE and ACDELCO. The "Popular" part is ACDELCO 109243.

The Dexron section lists 6 options from VALVOLINE and ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

The Mercon section lists 1 option from VALVOLINE — grouped under the catalog's "Mercon" designation — the notes column spells out what sets them apart. VALVOLINE 822345 is listed in this group.

The Multi-Vehicle section lists 4 options from VALVOLINE — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

The Type III (H) section lists 2 options from ACDELCO — grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. ACDELCO 109240 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Transfer Case Input Shaft Bearing parts for the 2000 Hummer H1 come from 5 brands — NATIONAL, BCA, SKF and 2 other brands. The "Popular" part is NATIONAL 110L.

Part numbers include NATIONAL 110L, BCA NB110L and SKF 6010NRJ, among others listed above.

This table covers the Transfer Case Input Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Input Shaft Pilot Bearing parts for the 2000 Hummer H1 come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL FC66561 and WJB / INMOTION PARTS WRFC66561.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

4 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2000 Hummer H1, from SCHAEFFLER, SKF, TIMKEN and 1 other brand.

Part numbers include SCHAEFFLER SR3509, SKF 99193 and TIMKEN KWK99193, among others listed above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Transfer Case Input Shaft Seal parts are listed for the 2000 Hummer H1, from SKF, BCA, TIMKEN and 3 other brands. NATIONAL 710928 carries the "Popular" badge.

This table covers the Transfer Case Low Gear Roller bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2000 Hummer H1 — PIONEER 764014.

This table covers the wear sleeves used to restore a Transfer Case Oil Pump Housing seal surface. Read more

5 Transfer Case Oil Pump Housing Repair Sleeve parts for the 2000 Hummer H1 come from 5 brands — NATIONAL, BCA, SKF and 2 other brands. The "Popular" part is NATIONAL 99225.

Listed part numbers: NATIONAL 99225 and BCA NS99225, plus the other parts above.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Transfer Case Output Shaft Bearing parts are listed for the 2000 Hummer H1, from WJB / INMOTION PARTS, TIMKEN, BCA and 3 other brands. WJB / INMOTION PARTS RB6207 carries the "Popular" badge.

Economy: 2 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS RB6207.

The Standard Replacement section: 10 options from TIMKEN, BCA, NATIONAL and 2 other brands. TIMKEN 207 is listed in this group.

This table covers the Transfer Case Output Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Transfer Case Output Shaft Pilot Bearing parts are listed for the 2000 Hummer H1, from NATIONAL, BCA, SKF and 2 other brands. NATIONAL J2416 carries the "Popular" badge.

This group includes NATIONAL J2416 and BCA NBJ2416 and the remaining parts above.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

7 Transfer Case Output Shaft Repair Sleeve parts for the 2000 Hummer H1 come from 5 brands — NATIONAL, WJB / INMOTION PARTS, BCA and 2 other brands. The "Popular" part is BCA NS88187.

Part numbers include BCA NS88187, NATIONAL 99187 and NATIONAL 99210, among others listed above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Transfer Case Output Shaft Seal parts for the 2000 Hummer H1 come from 5 brands — SCHAEFFLER, NATIONAL, WJB / INMOTION PARTS and 2 other brands. The "Popular" part is NATIONAL 3946.

This group includes NATIONAL 3946 and NATIONAL 710663 and the remaining parts above.

This table covers the Transfer Case Overhaul kits. Read more

This group shows a single part: SKF STCK242AA.

This table covers the U-joints in the driveshaft. Read more

17 Universal Joint parts for the 2000 Hummer H1 come from 3 brands — DANA, ACDELCO and AAM. The "Popular" part is DANA 15213X.

The Economy section: 4 options from DANA. DANA 15213X is listed in this group.

In the Heavy Duty grade, DANA and ACDELCO supply 8 parts: rated for severe service. A representative part number is DANA 51330X.

Standard Replacement: 5 parts, from DANA, ACDELCO and AAM. A representative part number is DANA 5213X.