1930 Hupmobile Model S Ignition Parts

Engine:
212cid L6

13 Ignition parts are listed for the 1930 Hupmobile Model S, in 6 part types, covering the 212cid L6 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1930 Hupmobile Model S, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Ignition Coil (5 parts), Distributor Cap (2 parts) and Distributor Rotor (2 parts). The other 3 part types cover the remaining 4 parts.

Condenser / Capacitor

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS AL111T
🇺🇸 US
T-Series
View on
Amazon

This table covers the capacitors used in this electrical or A/C circuit.

Distributor Cap

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL494LG
🇺🇸 US
View on
Amazon
STANDARD MOTOR PRODUCTS AL494
🇺🇸 US
View on
Amazon

This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Distributor Rotor

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL179LG
🇺🇸 US
Premium
View on
Amazon
STANDARD MOTOR PRODUCTS AL179
🇺🇸 US
View on
Amazon

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC14T
🇺🇸 US
T-Series6 Volt
View on
Amazon
FVP UC14F
🇺🇸 US
View on
Amazon
HOLSTEIN 2IGC0057
🇺🇸 US
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS UC14
🇺🇸 US
Blue Streak6 Volt
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
UNITED MOTOR PRODUCTS C14
🇺🇸 US
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Coil Mounting Bracket

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS CB6
🇺🇸 US
View on
Amazon

This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.

Spark Plug

Brand Part Number Markets Notes Buy
CHAMPION 516
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 516
Copper PlusPre-Set Gap: 0.025"
Non-Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION 541
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 541
Copper PlusPre-Set Gap: 0.025"
Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1930 Hupmobile Model S

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 212cid L6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Distributor Cap .

Frequently Asked Questions

How many ignition parts fit the 1930 Hupmobile Model S?

Our catalog currently lists 13 ignition parts for the 1930 Hupmobile Model S across 6 subcategories and 6 brands, covering the 212cid L6 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1930 Hupmobile Model S?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1930 Hupmobile Model S?

Notes on this page include a 0.025" pre-set gap. Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1930 Hupmobile Model S was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1930 Hupmobile Model S?

Every part on this page is matched to the 212cid L6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1930 Hupmobile Model S

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.