The 1939 Hupmobile Model E has 6 ignition parts with verified fitment on this page — 4 part types and 3 brands, covering the 6cyl engine. Each part includes a manufacturer part number and application notes.
On the 1939 Hupmobile Model E, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 5 parts of the 6 listed are Distributor Cap (2 parts), Spark Plug (2 parts) and Condenser / Capacitor (1 part). The other 1 part type covers the remaining 1 part.
The 1939 Hupmobile Model E came with a single engine, the 6cyl, and every part is verified against it.
3 brands supply ignition parts for the 1939 Hupmobile Model E, led by STANDARD MOTOR PRODUCTS (2 parts), LILAND GLOBAL (2 parts) and CHAMPION (2 parts).
Each part number listed for the 1939 Hupmobile Model E opens a page with every vehicle that part fits.
Condenser / Capacitor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | AL111T | 🇺🇸 US | T-Series | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
This group shows a single part: STANDARD MOTOR PRODUCTS AL111T.
Distributor Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LILAND GLOBAL | AL494LG | 🇺🇸 US | View on Amazon | |
| STANDARD MOTOR PRODUCTS | AL494 | 🇺🇸 US | View on Amazon |
This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
2 Distributor Cap parts are listed for the 1939 Hupmobile Model E, from LILAND GLOBAL and STANDARD MOTOR PRODUCTS.
Part numbers include LILAND GLOBAL AL494LG and STANDARD MOTOR PRODUCTS AL494.
Distributor Rotor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LILAND GLOBAL | AL179LG | 🇺🇸 US | Premium | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
One part is listed for the 1939 Hupmobile Model E — LILAND GLOBAL AL179LG.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION | 516 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION | 541 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
CHAMPION supplies both parts for the 1939 Hupmobile Model E.
This group includes CHAMPION 516 and CHAMPION 541.
Buying Ignition Parts for a 1939 Hupmobile Model E
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 6cyl engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Distributor Cap and Spark Plug .
Frequently Asked Questions
How many ignition parts fit the 1939 Hupmobile Model E?
Our catalog currently lists 6 ignition parts for the 1939 Hupmobile Model E across 4 subcategories and 3 brands, covering the 6cyl engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1939 Hupmobile Model E?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1939 Hupmobile Model E?
Notes on this page include a 0.025" pre-set gap. Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1939 Hupmobile Model E was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1939 Hupmobile Model E?
Every part on this page is matched to the 6cyl engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1939 Hupmobile Model E
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.