1986 Hyundai Stellar Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: DURA-BOND MIA3.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts are listed for the 1986 Hyundai Stellar, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS99139, NATIONAL 99139 and SCHAEFFLER SR3472, among others listed above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Camshaft Seal parts are listed for the 1986 Hyundai Stellar, from ELRING, SCHAEFFLER and WJB / INMOTION PARTS.

Part numbers include ELRING 293946, SCHAEFFLER SS2449 and WJB / INMOTION PARTS WS3771.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts are listed for the 1986 Hyundai Stellar, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO CP75001 and VICTOR REINZ 711616600.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: SEALED POWER 43485CP.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts are listed for the 1986 Hyundai Stellar, from MAHLE / CLEVITE and SEALED POWER.

This group includes MAHLE / CLEVITE MS2076A and SEALED POWER 5103M.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 1986 Hyundai Stellar, from FEL-PRO, MAHLE / CLEVITE and SKF.

Listed part numbers: FEL-PRO 16275, MAHLE / CLEVITE A354 and SKF 99284.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts are listed for the 1986 Hyundai Stellar, from NATIONAL, WJB / INMOTION PARTS, BCA and 3 other brands. NATIONAL 224460 carries the "Popular" badge.

Listed part numbers: NATIONAL 224460, WJB / INMOTION PARTS WS224460 and BCA NS224460, plus the other parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 1986 Hyundai Stellar come from ELRING.

Listed part numbers: ELRING 709190 and ELRING 709170.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 521142.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1986 Hyundai Stellar — KAT'S HEATERS 11402.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Expansion Plug parts for the 1986 Hyundai Stellar come from PIONEER.

Listed part numbers: PIONEER PE214 and PIONEER PE214R.

This table covers the seals at the Intermediate Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1986 Hyundai Stellar — ELRING 247260.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 1986 Hyundai Stellar — DEA / MARMON RIDE CONTROL A6100.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

MOBIL supplies the 10 Oil parts for the 1986 Hyundai Stellar. MOBIL 125195 carries the "Popular" badge.

In the Full Synthetic grade, MOBIL supplies 5 parts: full-synthetic oils. A representative part number is MOBIL 125195.

The High Mileage (>75,000 Miles) section lists 3 options from MOBIL — oils grouped for high-mileage engines. MOBIL 125201 is listed in this group.

In the Synthetic Blend grade, MOBIL supplies 2 parts: synthetic-blend oils. A representative part number is MOBIL 124407.

This table covers the drain plugs in the oil pan. Read more

DORMAN supplies the 3 Oil Drain Plug parts for the 1986 Hyundai Stellar.

The Piggyback section lists 1 option from DORMAN — grouped under the catalog's "Piggyback" designation — the notes column spells out what sets them apart. DORMAN 65229 is listed in this group.

The Universal section lists 1 option from DORMAN — grouped under the catalog's "Universal" designation — the notes column spells out what sets them apart. DORMAN 65102 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Part numbers include DORMAN 65229, DORMAN 65102 and DORMAN 090082.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

6 Oil Filter parts are listed for the 1986 Hyundai Stellar, from CHAMP / LUBER-FINER, PRO-TEC, VARIOUS MFR and 3 other brands. BOSCH 3421 carries the "Popular" badge.

In the Economy grade, CHAMP / LUBER-FINER, PRO-TEC and VARIOUS MFR supply 3 parts: the catalog's value-priced group. A representative part number is CHAMP / LUBER-FINER PH2856A.

The Standard Replacement section lists 3 options from BOSCH, WIX and FRAM — built to original-equipment specification. BOSCH 3421 is listed in this group.

Listed part numbers: BOSCH 3421, CHAMP / LUBER-FINER PH2856A and PRO-TEC PXL51381, plus the other parts above.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Oil Pump Seal parts for the 1986 Hyundai Stellar come from 4 brands — BCA, ELRING, NATIONAL and 1 other brand.

This group includes BCA NS221710, ELRING 801550 and NATIONAL 221710 and the remaining parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: SEALED POWER E387X.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

This group shows a single part: CLOYES B073.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 1986 Hyundai Stellar — CLOYES 95033.

This table covers the Timing Cam sprockets. Read more

One part is listed for the 1986 Hyundai Stellar — CLOYES S670.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1986 Hyundai Stellar — SKF 17168.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

One part is listed for the 1986 Hyundai Stellar — CLOYES S633.

This table covers the Torque Strut bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1986 Hyundai Stellar — DEA / MARMON RIDE CONTROL A6640.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Torque Strut Mount parts for the 1986 Hyundai Stellar come from DEA / MARMON RIDE CONTROL.

Listed part numbers: DEA / MARMON RIDE CONTROL A6122 and DEA / MARMON RIDE CONTROL A6150.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts are listed for the 1986 Hyundai Stellar, from ELRING and FEL-PRO.

This group includes ELRING 287059, ELRING 332291 and ELRING 560707 and the remaining parts above.

This table covers the Valve Cover grommets. Read more

One part is listed for the 1986 Hyundai Stellar — VICTOR REINZ 151012801.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts are listed for the 1986 Hyundai Stellar, from ELRING and VICTOR REINZ.

Part numbers include ELRING 125940, ELRING 010270 and VICTOR REINZ 121709301.