17 Drivetrain parts are listed for the 1987 Hyundai Stellar, in 5 part types, covering the 2.0L L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1987 Hyundai Stellar, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are Differential Pinion Bearing / Race (9 parts), Differential Pinion Repair Sleeve (3 parts) and Differential Pinion Seal (3 parts). The other 2 part types cover the remaining 2 parts.
The 1987 Hyundai Stellar came with a single engine, the 2.0L L4, and every part is verified against it.
6 brands supply drivetrain parts for the 1987 Hyundai Stellar, led by BCA (5 parts), TIMKEN (4 parts) and WJB / INMOTION PARTS (4 parts), plus 3 more brands. Quality grades include Standard Replacement and Economy.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1987 Hyundai Stellar. 2 parts have it, including WJB / INMOTION PARTS WTM88048 (Differential Pinion Bearing / Race) and BCA NBBR52 (Differential Pinion Bearing / Race). Each part number opens a page with every vehicle that part fits.
Differential Carrier Bearing / Race
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN | 30207 | 🇨🇦 CA | RearMIP Axle | View on Amazon |
This table covers the bearings and races that support the differential carrier.
One part is listed for the 1987 Hyundai Stellar — TIMKEN 30207.
Differential Pinion Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular | WTM88048 | 🇨🇦 CA | Bearing Shape: Cylindrical | View on Amazon |
| WJB / INMOTION PARTS | WTM88010 | 🇨🇦 CA | RaceCup Outside Diameter (In): 2.6880000000000002 In | View on Amazon |
| WJB / INMOTION PARTS | WT32207 | 🇨🇦 CA | Bearing & Race Set | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Popular | NBBR52 | 🇨🇦 CA | Bearing & Race | View on Amazon |
| BCA | NBM88010 | 🇨🇦 CA | Race | View on Amazon |
| BCA | NBM88048 | 🇨🇦 CA | Bearing Shape: Cylindrical | View on Amazon |
| BCA | NB32207 | 🇨🇦 CA | Taper Bearing SetIncludes Cup and Cone | View on Amazon |
| TIMKEN | 32207M | 🇨🇦 CA | Rear OuterMIP Axle | View on Amazon |
| TIMKEN | 32207 | 🇨🇦 CA | Rear OuterMIP Axle | View on Amazon |
This table covers the bearings and races on the differential pinion.
9 Differential Pinion Bearing / Race parts for the 1987 Hyundai Stellar come from 3 brands — BCA, WJB / INMOTION PARTS and TIMKEN. The "Popular" part is WJB / INMOTION PARTS WTM88048.
The Economy section lists 3 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTM88048 is listed in this group.
In the Standard Replacement grade, BCA and TIMKEN supply 6 parts: built to original-equipment specification. A representative part number is BCA NBBR52.
Listed part numbers: WJB / INMOTION PARTS WTM88048, WJB / INMOTION PARTS WTM88010 and WJB / INMOTION PARTS WT32207, plus the other parts above.
Differential Pinion Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA | NS99139 | 🇨🇦 CA | Rear OuterHyundai KSC Axles | View on Amazon |
| NATIONAL | 99139 | 🇨🇦 CA | Rear Outerwith Hyundai KSC Axle(s) | View on Amazon |
| WJB / INMOTION PARTS | WS99139 | 🇨🇦 CA | Rear Outerwith Hyundai KSC Axle(s) | View on Amazon |
This table covers the wear sleeves used to restore a grooved pinion seal surface.
3 Differential Pinion Repair Sleeve parts are listed for the 1987 Hyundai Stellar, from BCA, NATIONAL and WJB / INMOTION PARTS.
This group includes BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL | 471847N | 🇨🇦 CA | Rear Outerwith Hyundai KSC Axle(s) | View on Amazon |
| SCHAEFFLER | SS2436 | 🇨🇦 CA | Rear Outer2.57" O.D. X 0.39" Width | View on Amazon |
| TIMKEN | 471847N | 🇨🇦 CA | RearMIP Axle | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Differential Pinion Seal parts are listed for the 1987 Hyundai Stellar, from NATIONAL, SCHAEFFLER and TIMKEN.
This group includes NATIONAL 471847N and SCHAEFFLER SS2436 and the remaining parts above.
Gear Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL | 104361 | 🇨🇦 CA | Synthetic Gear Lube Limited Slip 75W-901 Quart | View on Amazon |
This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle.
One part is listed for the 1987 Hyundai Stellar — MOBIL 104361.
Buying Drivetrain Parts for a 1987 Hyundai Stellar
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Confirm you have the 2.0L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Differential Pinion Bearing / Race and Differential Pinion Repair Sleeve .
Frequently Asked Questions
How many drivetrain parts fit the 1987 Hyundai Stellar?
Our catalog currently lists 17 drivetrain parts for the 1987 Hyundai Stellar across 5 subcategories and 6 brands, covering the 2.0L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of drivetrain problems on a 1987 Hyundai Stellar?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1987 Hyundai Stellar was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1987 Hyundai Stellar?
Every part on this page is matched to the 2.0L L4 engine. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1987 Hyundai Stellar
Drivetrain Parts for Other Hyundai Stellar Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.