1989 Hyundai Sonata Engine Parts

This table covers the Auxiliary valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Auxiliary Valve parts are listed for the 1989 Hyundai Sonata, from ITM ENGINE COMPONENTS and TOPLINE.

This group includes ITM ENGINE COMPONENTS RV9392 and TOPLINE CAVC23.

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Balance Shaft Bearing parts are listed for the 1989 Hyundai Sonata, from ENGINETECH, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 1 other brand.

Part numbers include ENGINETECH BS1811, ITM ENGINE COMPONENTS 3C9975 and MAHLE / CLEVITE SH1469S, among others listed above.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

11 Balance Shaft Belt parts for the 1989 Hyundai Sonata come from 10 brands — CONTINENTAL, CLOYES, ITM ENGINE COMPONENTS and 7 other brands. The "Popular" part is CLOYES B159.

The Economy section lists 4 options from CLOYES, CONTINENTAL, ITM ENGINE COMPONENTS and 1 other brand — the catalog's value-priced group. CLOYES B159 is listed in this group.

In the Standard Replacement grade, GATES, ACDELCO, CONTINENTAL and 3 other brands supply 6 parts: built to original-equipment specification. A representative part number is GATES T159.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Balance Shaft Belt Tensioner parts are listed for the 1989 Hyundai Sonata, from CLOYES, AUTO 7, GMB and 2 other brands. CLOYES 95161 carries the "Popular" badge.

Listed part numbers: CLOYES 95161, AUTO 7 6200025 and GMB 4488480, plus the other parts above.

This table covers the wear sleeves used to restore a Balance Shaft seal surface. Read more

3 Balance Shaft Repair Sleeve parts for the 1989 Hyundai Sonata come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

This group includes NATIONAL 99098, SCHAEFFLER SR3458 and WJB / INMOTION PARTS WS99098.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Balance Shaft Seal parts for the 1989 Hyundai Sonata come from 5 brands — JAPANESE OE, NATIONAL, WJB / INMOTION PARTS and 2 other brands. The "Popular" part is NATIONAL 712007.

Listed part numbers: NATIONAL 712007, WJB / INMOTION PARTS WS712007 and HYUNDAI 2142132030, plus the other parts above.

This table covers the camshafts that open the valves. Read more

2 Camshaft parts for the 1989 Hyundai Sonata come from 2 brands — AUTO 7 and ITM ENGINE COMPONENTS.

This group includes AUTO 7 6150033 and ITM ENGINE COMPONENTS 0564491.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Camshaft Bearing parts for the 1989 Hyundai Sonata come from 3 brands — DURA-BOND, KING ENGINE BEARINGS and MAHLE / CLEVITE.

Part numbers include DURA-BOND MIG3, DURA-BOND MIA1 and DURA-BOND MIA2, among others listed above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts are listed for the 1989 Hyundai Sonata, from NATIONAL, BCA, SKF and 2 other brands. NATIONAL 99139 carries the "Popular" badge.

Part numbers include NATIONAL 99139 and BCA NS99139, among others listed above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts are listed for the 1989 Hyundai Sonata, from FEL-PRO, NATIONAL, TIMKEN and 11 other brands. FEL-PRO TCS45483 carries the "Popular" badge.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

4 Circular / Semi-Circular Plug parts are listed for the 1989 Hyundai Sonata, from APEX, FEL-PRO, JAPANESE OE and 1 other brand.

Listed part numbers: APEX ACP201, FEL-PRO CP75001 and JAPANESE OE AM0110231, plus the other parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts for the 1989 Hyundai Sonata come from 6 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 3 other brands. The "Popular" part is ENGINETECH BB1085.

The High Performance section lists 4 options from KING ENGINE BEARINGS and MAHLE / CLEVITE — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4481XP is listed in this group.

Standard Replacement: 7 parts, from MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 3 other brands. A representative part number is ENGINETECH BB1085.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts for the 1989 Hyundai Sonata come from 5 brands — ENGINETECH, AJUSA, APEX and 2 other brands. The "Popular" part is ENGINETECH MI24CS.

Listed part numbers: ENGINETECH MI24CS, AJUSA 54089500 and APEX ACS2006, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 1989 Hyundai Sonata, from ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 2 other brands. ENGINETECH BC2821 carries the "Popular" badge.

Listed part numbers: ENGINETECH BC2821, ITM ENGINE COMPONENTS 5M9357 and KING ENGINE BEARINGS MB5227AM, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 1989 Hyundai Sonata, from TIMKEN, SCHAEFFLER, BCA and 2 other brands. BCA NS99315 carries the "Popular" badge.

Part numbers include BCA NS99315, TIMKEN KWK99181 and FEL-PRO 16275, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

20 Crankshaft Seal parts are listed for the 1989 Hyundai Sonata, from FEL-PRO, NATIONAL, TIMKEN and 10 other brands. FEL-PRO BS404081 carries the "Popular" badge.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AUTO 7 6420028.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 1989 Hyundai Sonata come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 81057300 and ELRING 709170.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 1989 Hyundai Sonata come from 6 brands — APEX, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is APEX AHG206.

This group includes APEX AHG206, FEL-PRO 9388PT and AJUSA 10079100 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts for the 1989 Hyundai Sonata come from 7 brands — APEX, ENGINETECH, CORTECO and 4 other brands. The "Popular" part is APEX AHS2006.

Part numbers include APEX AHS2006, ENGINETECH MI24HSA and CORTECO 21905, among others listed above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 1989 Hyundai Sonata — DORMAN 565093.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 1989 Hyundai Sonata come from 2 brands — ENGINETECH and SBI.

This group includes ENGINETECH CHS1003 and SBI 2302004.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1989 Hyundai Sonata — KAT'S HEATERS 11402.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 1989 Hyundai Sonata come from 4 brands — APEX, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand.

Part numbers include APEX AFS2006, ENGINETECH MI24K2 and ITM ENGINE COMPONENTS 0900328, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts are listed for the 1989 Hyundai Sonata, from ENGINETECH, ITM ENGINE COMPONENTS, QUALCAST and 2 other brands. ENGINETECH EM2481 carries the "Popular" badge.

Part numbers include ENGINETECH EM2481, ITM ENGINE COMPONENTS RX9391 and QUALCAST 1010144, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

6 Expansion Plug parts for the 1989 Hyundai Sonata come from 4 brands — DORMAN, QUALCAST, ENGINETECH and 1 other brand. The "Popular" part is DORMAN 555093.

Listed part numbers: DORMAN 555093, DORMAN 565093 and ENGINETECH PK914, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts for the 1989 Hyundai Sonata come from 5 brands — DORMAN, ATP, HYUNDAI and 2 other brands. The "Popular" part is ATP 102214.

Part numbers include ATP 102214, HYUNDAI 2312932520 and DAYCO PB1427N, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Intake Manifold Gasket parts for the 1989 Hyundai Sonata come from 8 brands — MAHLE / CLEVITE, FEL-PRO, OMNI 5 and 5 other brands. The "Popular" part is FEL-PRO MS929641.

Part numbers include FEL-PRO MS929641, OMNI 5 PWC50350 and AJUSA 13089400, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 1989 Hyundai Sonata, from ENGINETECH, ITM ENGINE COMPONENTS, QUALCAST and 2 other brands. ENGINETECH IM2408 carries the "Popular" badge.

Listed part numbers: ENGINETECH IM2408, ITM ENGINE COMPONENTS RV9405 and QUALCAST 1010143, plus the other parts above.

This table covers the seals at the Intermediate Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1989 Hyundai Sonata — ELRING 247260.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

17 Motor Mount parts are listed for the 1989 Hyundai Sonata, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 2 other brands. ANCHOR 8714 carries the "Popular" badge.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

30 Oil parts are listed for the 1989 Hyundai Sonata, from MOBIL and VALVOLINE. MOBIL 125195 carries the "Popular" badge. They are grouped as Conventional, Full Synthetic, Heavy Duty / Diesel, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 11 parts from MOBIL and VALVOLINE.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1989 Hyundai Sonata come from HAYDEN.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts are listed for the 1989 Hyundai Sonata, from DORMAN, AGS, REIN and 1 other brand. DORMAN 090033 carries the "Popular" badge. 3 parts fit every engine; the other 6 are engine-specific.

The Piggyback section lists 1 option from DORMAN — grouped under the catalog's "Piggyback" designation — the notes column spells out what sets them apart. DORMAN 65229 is listed in this group.

The Twist Drain section lists 1 option from DORMAN — grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. DORMAN 092020 is listed in this group.

The Universal section lists 1 option from DORMAN — grouped under the catalog's "Universal" designation — the notes column spells out what sets them apart. DORMAN 65102 is listed in this group.

6 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: DORMAN 090033, DORMAN 65229 and DORMAN 092020, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 1989 Hyundai Sonata come from 5 brands — DORMAN, AJUSA, ELRING and 2 other brands. The "Popular" part is DORMAN 095141.

This group includes DORMAN 095141, AJUSA 18001000 and ELRING 726760 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 1989 Hyundai Sonata, from ACDELCO, BECK/ARNLEY, HYUNDAI and 1 other brand.

This group includes ACDELCO 12C36, BECK/ARNLEY 0160050 and HYUNDAI 2651035000 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts are listed for the 1989 Hyundai Sonata, from BOSCH, FRAM, VARIOUS MFR and 10 other brands. WIX 51334XP carries the "Popular" badge.

Economy: 5 parts, from BOSCH, FRAM, FVP and 2 other brands. A representative part number is BOSCH 72228WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51334XP.

The Standard Replacement section: 10 options from BOSCH, DENSO, WIX and 7 other brands. BOSCH 3312 is listed in this group.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 1989 Hyundai Sonata — WELLS 1S6673.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 1989 Hyundai Sonata, from VICTOR REINZ, APEX, FEL-PRO and 1 other brand. VICTOR REINZ 703141410 carries the "Popular" badge.

Part numbers include VICTOR REINZ 703141410, APEX AOP203 and FEL-PRO OS30460A, among others listed above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: BECK/ARNLEY 0398016.