1992 Hyundai Sonata Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Balance Shaft Bearing parts are listed for the 1992 Hyundai Sonata, from SEALED POWER, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. SEALED POWER 1810M carries the "Popular" badge.

Listed part numbers: SEALED POWER 1810M, ENGINETECH BS1811 and ITM ENGINE COMPONENTS 3C9975, plus the other parts above.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

12 Balance Shaft Belt parts for the 1992 Hyundai Sonata come from 12 brands — CLOYES, ITM ENGINE COMPONENTS, PREFERRED COMPONENTS INC and 9 other brands. The "Popular" part is CLOYES B168.

The Economy section lists 5 options from CLOYES, ITM ENGINE COMPONENTS, PREFERRED COMPONENTS INC and 2 other brands — the catalog's value-priced group. CLOYES B168 is listed in this group.

In the Standard Replacement grade, DAYCO, GATES, ACDELCO and 3 other brands supply 6 parts: built to original-equipment specification. A representative part number is DAYCO 95168.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Balance Shaft Belt Tensioner parts are listed for the 1992 Hyundai Sonata, from CLOYES, GATES, GMB and 2 other brands. CLOYES 95197 carries the "Popular" badge.

Part numbers include CLOYES 95197, GATES T41047 and GMB 4481070, among others listed above.

This table covers the wear sleeves used to restore a Balance Shaft seal surface. Read more

4 Balance Shaft Repair Sleeve parts for the 1992 Hyundai Sonata come from 4 brands — NATIONAL, SCHAEFFLER, TIMKEN and 1 other brand.

This group includes NATIONAL 99098, SCHAEFFLER SR3458 and TIMKEN KWK99098 and the remaining parts above.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Balance Shaft Seal parts for the 1992 Hyundai Sonata come from 5 brands — NATIONAL, HYUNDAI, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is NATIONAL 712007.

This group includes NATIONAL 712007, HYUNDAI 2142132030 and ITM ENGINE COMPONENTS 1500804 and the remaining parts above.

This table covers the camshafts that open the valves. Read more

6 Camshaft parts for the 1992 Hyundai Sonata come from 5 brands — AJUSA, BECK/ARNLEY, AUTO 7 and 2 other brands. The "Popular" part is BECK/ARNLEY 0200164.

Part numbers include BECK/ARNLEY 0200164, AJUSA 93005700 and AJUSA 93005800, among others listed above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Camshaft Bearing parts for the 1992 Hyundai Sonata come from 2 brands — DURA-BOND and KING ENGINE BEARINGS.

Listed part numbers: DURA-BOND MIG3 and KING ENGINE BEARINGS CS3305BB.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts are listed for the 1992 Hyundai Sonata, from NATIONAL, SCHAEFFLER, SKF and 2 other brands. NATIONAL 99139 carries the "Popular" badge.

Listed part numbers: NATIONAL 99139 and SCHAEFFLER SR3472, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Camshaft Seal parts are listed for the 1992 Hyundai Sonata, from SKF, FEL-PRO, NATIONAL and 11 other brands. FEL-PRO TCS45483 carries the "Popular" badge.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Circular / Semi-Circular Plug parts are listed for the 1992 Hyundai Sonata, from APEX, FEL-PRO and VICTOR REINZ.

Part numbers include APEX ACP200, FEL-PRO CP75013 and VICTOR REINZ 711349400.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts for the 1992 Hyundai Sonata come from 6 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 3 other brands. The "Popular" part is MAHLE / CLEVITE CB1643H.

The High Performance section lists 5 options from KING ENGINE BEARINGS and MAHLE / CLEVITE — engineered beyond original-equipment specification. MAHLE / CLEVITE CB1643H is listed in this group.

Standard Replacement: 6 parts, from ENGINETECH, MAHLE / CLEVITE, ITM ENGINE COMPONENTS and 3 other brands. A representative part number is ENGINETECH BB1085.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts for the 1992 Hyundai Sonata come from 6 brands — APEX, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is APEX ACS2003.

This group includes APEX ACS2003, FEL-PRO CS9627 and AJUSA 54089500 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 1992 Hyundai Sonata, from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 2 other brands. MAHLE / CLEVITE MS2039P carries the "Popular" badge.

Listed part numbers: MAHLE / CLEVITE MS2039P, ENGINETECH BC2821 and KING ENGINE BEARINGS MB5227AM, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 1992 Hyundai Sonata, from TIMKEN, SCHAEFFLER, BCA and 2 other brands. BCA NS99315 carries the "Popular" badge.

Listed part numbers: BCA NS99315, TIMKEN KWK99181 and NATIONAL 99315, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

19 Crankshaft Seal parts are listed for the 1992 Hyundai Sonata, from FEL-PRO, NATIONAL, TIMKEN and 10 other brands. FEL-PRO BS40444 carries the "Popular" badge.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AUTO 7 6420028.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts for the 1992 Hyundai Sonata come from 5 brands — FEL-PRO, APEX, ENGINETECH and 2 other brands. The "Popular" part is FEL-PRO ES71175.

Listed part numbers: FEL-PRO ES71175, APEX AHB203 and ENGINETECH HB219, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts for the 1992 Hyundai Sonata come from 8 brands — APEX, FEL-PRO, AJUSA and 5 other brands. The "Popular" part is APEX AHG203S.

This group includes APEX AHG203S, FEL-PRO 9627PT and AJUSA 10078900 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts for the 1992 Hyundai Sonata come from 6 brands — ENGINETECH, FEL-PRO, APEX and 3 other brands. The "Popular" part is APEX AHS2003.

This group includes APEX AHS2003, ENGINETECH MI20HSF and ENGINETECH MI20HSFWB and the remaining parts above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 1992 Hyundai Sonata — DORMAN 565095.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 1992 Hyundai Sonata come from 2 brands — ENGINETECH and SBI.

This group includes ENGINETECH CHS1001 and SBI 2302001.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1992 Hyundai Sonata — KAT'S HEATERS 11402.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts for the 1992 Hyundai Sonata come from 5 brands — APEX, AJUSA, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is APEX AFS2003.

This group includes APEX AFS2003, AJUSA 50173600 and ITM ENGINE COMPONENTS 0901206 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts are listed for the 1992 Hyundai Sonata, from ENGINETECH, MELLING, ITM ENGINE COMPONENTS and 4 other brands. ENGINETECH EM2431 carries the "Popular" badge.

Listed part numbers: ENGINETECH EM2431, MELLING V5128 and ITM ENGINE COMPONENTS RX9377, plus the other parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Expansion Plug parts for the 1992 Hyundai Sonata come from 2 brands — ENGINETECH and TOPLINE.

This group includes ENGINETECH PK914 and TOPLINE EPSMI4.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

7 Harmonic Balancer parts for the 1992 Hyundai Sonata come from 4 brands — PIONEER, ATP, DORMAN and 1 other brand. The "Popular" part is DORMAN 594055.

Listed part numbers: DORMAN 594055, ATP 102268 and ATP 102082, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts for the 1992 Hyundai Sonata come from 6 brands — FEL-PRO, AJUSA, APEX and 3 other brands. The "Popular" part is FEL-PRO MS94328.

Listed part numbers: FEL-PRO MS94328, AJUSA 13088900 and APEX AMS2030, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

10 Intake Valve parts are listed for the 1992 Hyundai Sonata, from ITM ENGINE COMPONENTS, ENGINETECH, MELLING and 5 other brands. ENGINETECH IM2400 carries the "Popular" badge.

This table covers the seals at the Intermediate Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1992 Hyundai Sonata — ELRING 247260.