2008 Hyundai Azera Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts for the 2008 Hyundai Azera come from 2 brands — ENGINETECH and TOPLINE.

Part numbers include ENGINETECH BB1045 and TOPLINE RBHY14.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts for the 2008 Hyundai Azera come from 5 brands — APEX, AJUSA, FEL-PRO and 2 other brands. The "Popular" part is APEX ACS2093.

Listed part numbers: APEX ACS2093, AJUSA 54179100 and FEL-PRO CS26414, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts are listed for the 2008 Hyundai Azera, from TOPLINE and ENGINETECH.

This group includes ENGINETECH BC1034, TOPLINE TWHY14 and TOPLINE MBHY14.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 2008 Hyundai Azera, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99177, NATIONAL 99177 and WJB / INMOTION PARTS WS99177.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Crankshaft Seal parts are listed for the 2008 Hyundai Azera, from VICTOR REINZ, FEL-PRO, APEX and 6 other brands. FEL-PRO BS40710 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

7 Cylinder Head Bolt parts for the 2008 Hyundai Azera come from 7 brands — APEX, FEL-PRO, AJUSA and 4 other brands. The "Popular" part is APEX AHB293.

This group includes APEX AHB293, FEL-PRO ES72366 and AJUSA 81056400 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

15 Cylinder Head Gasket parts for the 2008 Hyundai Azera come from 7 brands — AJUSA, FEL-PRO, ULTRA-POWER and 4 other brands. The "Popular" part is FEL-PRO 26416PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Cylinder Head Gasket Set parts for the 2008 Hyundai Azera come from 7 brands — ENGINETECH, FEL-PRO, AJUSA and 4 other brands. The "Popular" part is ENGINETECH HY38HSB.

This group includes ENGINETECH HY38HSB, FEL-PRO HS26420PT and AJUSA 52283500 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 2008 Hyundai Azera — KAT'S HEATERS 11479.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2008 Hyundai Azera come from TECHPRO.

Part numbers include TECHPRO HY1228120, TECHPRO HY1228158 and TECHPRO HY1228159.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 2008 Hyundai Azera come from 2 brands — AJUSA and TOPLINE.

This group includes AJUSA 50595600 and TOPLINE CGSHY14.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts are listed for the 2008 Hyundai Azera, from HYUNDAI, MELLING, ENGINETECH and 3 other brands. HYUNDAI 222123C800 carries the "Popular" badge.

Listed part numbers: HYUNDAI 222123C800, MELLING V3287 and ENGINETECH EM4469, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts for the 2008 Hyundai Azera come from 6 brands — DORMAN, HL MANDO, ACKOJA and 3 other brands. The "Popular" part is DORMAN 594294.

Listed part numbers: DORMAN 594294, HL MANDO 30A5010 and ACKOJA A520618, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Manifold Gasket parts for the 2008 Hyundai Azera come from 6 brands — MAHLE / CLEVITE, AJUSA, BECK/ARNLEY and 3 other brands. The "Popular" part is FEL-PRO MS97086.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Plenum Gasket parts are listed for the 2008 Hyundai Azera, from BECK/ARNLEY, FEL-PRO, AJUSA and 3 other brands. BECK/ARNLEY 0374865 carries the "Popular" badge.

Part numbers include BECK/ARNLEY 0374865, FEL-PRO MS97227 and AJUSA 01234300, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 2008 Hyundai Azera, from MELLING, ENGINETECH, QUALCAST and 2 other brands. MELLING V3286 carries the "Popular" badge.

Listed part numbers: MELLING V3286, ENGINETECH IM4468 and QUALCAST 1013286, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

22 Motor Mount parts are listed for the 2008 Hyundai Azera, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 4 other brands. ANCHOR 9321 carries the "Popular" badge.

In the Economy grade, FAMOUS BRAND supplies 2 parts: the catalog's value-priced group. A representative part number is FAMOUS BRAND 2010501093.

The Standard Replacement section lists 20 options from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 3 other brands — built to original-equipment specification. ANCHOR 9321 is listed in this group.

This table covers the Motor Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2008 Hyundai Azera — PIONEER 607152.

This table covers the Motor Mount kits. Read more

One part is listed for the 2008 Hyundai Azera — ANCHOR 301103.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

102 Oil parts are listed for the 2008 Hyundai Azera, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. MOBIL 125195 carries the "Popular" badge. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 1 other brand.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2008 Hyundai Azera — AUTOTECNICA HY1419612.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts are listed for the 2008 Hyundai Azera, from DORMAN, AGS, ENGINETECH and 2 other brands. DORMAN 090033 carries the "Popular" badge.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Drain Plug Gasket parts for the 2008 Hyundai Azera come from 5 brands — DORMAN, JAPANESE OE, FEL-PRO and 2 other brands. The "Popular" part is DORMAN 095147.

Listed part numbers: DORMAN 095147, FEL-PRO 73346 and AJUSA 22007100, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2008 Hyundai Azera, from CALORSTAT, GATES, MOTORAD and 1 other brand.

This group includes CALORSTAT OC2331, GATES 31083 and MOTORAD MO81 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

35 Oil Filter parts are listed for the 2008 Hyundai Azera, from PUROLATOR, CHAMP / LUBER-FINER, ECOGARD and 21 other brands. CHAMP / LUBER-FINER P972 carries the "Popular" badge. They are grouped as Economy, High Performance / Heavy Duty and Standard Replacement, with Economy the largest group at 21 parts from PUROLATOR, CHAMP / LUBER-FINER, ECOGARD and 10 other brands.