2011 Hyundai Accent Engine Parts

This table covers the camshafts that open the valves. Read more

2 Camshaft parts are listed for the 2011 Hyundai Accent, from HYUNDAI and SKP.

Listed part numbers: HYUNDAI 2420026704 and SKP SKES1558.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

4 Camshaft Plug parts are listed for the 2011 Hyundai Accent, from FEL-PRO, HYUNDAI, MAHLE / CLEVITE and 1 other brand.

This group includes FEL-PRO CP75023, HYUNDAI 2232735504 and MAHLE / CLEVITE 67728 and the remaining parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

6 Camshaft Repair Sleeve parts for the 2011 Hyundai Accent come from 6 brands — NATIONAL, SKF, BCA and 3 other brands. The "Popular" part is NATIONAL 99139.

Part numbers include NATIONAL 99139 and BCA NS99139, among others listed above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Camshaft Seal parts for the 2011 Hyundai Accent come from 11 brands — NATIONAL, SKF, TIMKEN and 8 other brands. The "Popular" part is NATIONAL 3771.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts for the 2011 Hyundai Accent come from 2 brands — APEX and HYUNDAI.

Part numbers include APEX ACP203 and HYUNDAI 2244223500.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2011 Hyundai Accent — TOPLINE CRHY2.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts are listed for the 2011 Hyundai Accent, from ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 2 other brands. ENGINETECH BB1023 carries the "Popular" badge.

This group includes ENGINETECH BB1023, ITM ENGINE COMPONENTS 4B9643 and KING ENGINE BEARINGS CR4655AM and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts are listed for the 2011 Hyundai Accent, from AJUSA, ITM ENGINE COMPONENTS, APEX and 4 other brands. AJUSA 54244600 carries the "Popular" badge.

Part numbers include AJUSA 54244600, ITM ENGINE COMPONENTS 0921905 and APEX ACS2090, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2011 Hyundai Accent come from 4 brands — AUTO 7, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 1 other brand. The "Popular" part is ITM ENGINE COMPONENTS 5M9516.

This group includes ITM ENGINE COMPONENTS 5M9516, AUTO 7 6000263 and AUTO 7 6000266 and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2011 Hyundai Accent come from 5 brands — NATIONAL, BCA, SCHAEFFLER and 2 other brands. The "Popular" part is NATIONAL 99139.

Listed part numbers: NATIONAL 99139, BCA NS99139 and SCHAEFFLER SR3540, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

20 Crankshaft Seal parts for the 2011 Hyundai Accent come from 13 brands — ELRING, FEL-PRO, AJUSA and 10 other brands. The "Popular" part is ELRING 902760.

This table covers the bolts that clamp the cylinder head to the block. Read more

10 Cylinder Head Bolt parts are listed for the 2011 Hyundai Accent, from AJUSA, ENGINETECH, APEX and 6 other brands. AJUSA 81061400 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 2011 Hyundai Accent, from FEL-PRO, MAHLE / CLEVITE, AJUSA and 5 other brands. FEL-PRO 26224PT carries the "Popular" badge.

Listed part numbers: FEL-PRO 26224PT, MAHLE / CLEVITE 54484 and AJUSA 10197100, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Cylinder Head Gasket Set parts are listed for the 2011 Hyundai Accent, from ENGINETECH, FEL-PRO, ELRING and 7 other brands. ENGINETECH HY16HSB carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 2011 Hyundai Accent — SBI 2302190.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11485.

This table covers the Engine covers. Read more

TECHPRO supplies both parts for the 2011 Hyundai Accent.

Part numbers include TECHPRO HY1228107 and TECHPRO HY1228109.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts are listed for the 2011 Hyundai Accent, from ELRING, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. ENGINETECH HY16K3 carries the "Popular" badge.

This group includes ENGINETECH HY16K3, ITM ENGINE COMPONENTS 0900880 and AJUSA 50425100 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Exhaust Valve parts for the 2011 Hyundai Accent come from 7 brands — HYUNDAI, ITM ENGINE COMPONENTS, ENGINETECH and 4 other brands. The "Popular" part is HYUNDAI 2221226050.

This group includes HYUNDAI 2221226050, ITM ENGINE COMPONENTS RX9642 and ENGINETECH EM4421 and the remaining parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2011 Hyundai Accent — TOPLINE EPSC11.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

One part is listed for the 2011 Hyundai Accent — HYUNDAI 353252G700.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 2011 Hyundai Accent, from SKP, ATP, DAYCO and 2 other brands. SKP SK594053 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594053.

The Standard Replacement section lists 4 options from ATP, DAYCO, HL MANDO and 1 other brand — built to original-equipment specification. ATP 102152 is listed in this group.

Part numbers include SKP SK594053, ATP 102152 and DAYCO PB1458N, among others listed above.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2011 Hyundai Accent — SKP SK283202.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2011 Hyundai Accent, from ELRING, FEL-PRO, APEX and 2 other brands. ELRING 310560 carries the "Popular" badge.

This group includes ELRING 310560, FEL-PRO MS96331 and APEX AMS2280 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 2011 Hyundai Accent come from 7 brands — HYUNDAI, MELLING, ENGINETECH and 4 other brands. The "Popular" part is HYUNDAI 2221126600.

This group includes HYUNDAI 2221126600, MELLING V3047 and ENGINETECH IM4420 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

18 Motor Mount parts for the 2011 Hyundai Accent come from 7 brands — SKP, ANCHOR, BECK/ARNLEY and 4 other brands. The "Popular" part is SKP SKM9309.

The Economy section: 3 options from SKP. SKP SKM9309 is listed in this group.

Standard Replacement: 15 parts, from ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 3 other brands. A representative part number is HYUNDAI 219101G000.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2011 Hyundai Accent come from 2 brands — ANCHOR and WESTAR.

Part numbers include ANCHOR 300385 and WESTAR ETK071.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

102 Oil parts for the 2011 Hyundai Accent come from 7 brands — VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. The "Popular" part is MOBIL 125195. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2011 Hyundai Accent.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

10 Oil Drain Plug parts for the 2011 Hyundai Accent come from 6 brands — DORMAN, ELRING, ACKOJA and 3 other brands. The "Popular" part is DORMAN 090033.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Drain Plug Gasket parts are listed for the 2011 Hyundai Accent, from DORMAN, FEL-PRO, ACKOJA and 2 other brands. DORMAN 095147 carries the "Popular" badge.

Listed part numbers: DORMAN 095147, FEL-PRO 72515 and ACKOJA A532804, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2011 Hyundai Accent come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand.

This group includes CALORSTAT OC2331, GATES 31083 and MOTORAD MO151 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts for the 2011 Hyundai Accent come from 16 brands — BOSCH, VARIOUS MFR, WIX and 13 other brands. The "Popular" part is WIX 51334XP.

The Economy section: 5 options from BOSCH, FRAM, FVP and 2 other brands. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51334XP is listed in this group.

Standard Replacement: 13 parts, from HYUNDAI, BOSCH, DENSO and 9 other brands. A representative part number is BOSCH 3312.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 453220.