2011 Hyundai Veracruz Engine Parts

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2011 Hyundai Veracruz — HYUNDAI 235103L100.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts are listed for the 2011 Hyundai Veracruz, from ENGINETECH and TOPLINE.

Part numbers include ENGINETECH BB1045 and TOPLINE RBHY14.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 2011 Hyundai Veracruz, from APEX, FEL-PRO, AJUSA and 3 other brands. APEX ACS2093 carries the "Popular" badge.

Listed part numbers: APEX ACS2093, FEL-PRO CS26414 and AJUSA 54172400, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts for the 2011 Hyundai Veracruz come from 2 brands — TOPLINE and ENGINETECH.

Part numbers include ENGINETECH BC1034, TOPLINE TWHY14 and TOPLINE MBHY14.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2011 Hyundai Veracruz come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99177, NATIONAL 99177 and WJB / INMOTION PARTS WS99177.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Crankshaft Seal parts for the 2011 Hyundai Veracruz come from 9 brands — VICTOR REINZ, FEL-PRO, APEX and 6 other brands. The "Popular" part is FEL-PRO BS40710.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 2011 Hyundai Veracruz, from APEX, FEL-PRO, AJUSA and 3 other brands. APEX AHB293 carries the "Popular" badge.

Listed part numbers: APEX AHB293, FEL-PRO ES72366 and AJUSA 81056400, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

15 Cylinder Head Gasket parts are listed for the 2011 Hyundai Veracruz, from AJUSA, FEL-PRO, ULTRA-POWER and 4 other brands. FEL-PRO 26416PT carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts are listed for the 2011 Hyundai Veracruz, from FEL-PRO, APEX, AJUSA and 3 other brands. APEX AHS11051 carries the "Popular" badge.

Listed part numbers: APEX AHS11051, FEL-PRO HS26420PT2 and AJUSA 52283500, plus the other parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2011 Hyundai Veracruz come from KAT'S HEATERS.

This group includes KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

4 Engine Cover parts are listed for the 2011 Hyundai Veracruz, from TECHPRO and VARIOUS MFR.

This group includes TECHPRO HY1228146 and TECHPRO HY1228145 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 2011 Hyundai Veracruz, from AJUSA and TOPLINE.

This group includes AJUSA 50303300 and TOPLINE CGSHY14.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts for the 2011 Hyundai Veracruz come from 6 brands — HYUNDAI, MELLING, ENGINETECH and 3 other brands. The "Popular" part is HYUNDAI 222123C800.

Listed part numbers: HYUNDAI 222123C800, MELLING V3287 and ENGINETECH EM4469, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 2011 Hyundai Veracruz, from HL MANDO, ATP, DAYCO and 2 other brands. HL MANDO 30A5010 carries the "Popular" badge.

Listed part numbers: HL MANDO 30A5010, ATP 102222 and DAYCO PB1528N, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Intake Manifold Gasket parts are listed for the 2011 Hyundai Veracruz, from VICTOR REINZ, MAHLE / CLEVITE, AJUSA and 3 other brands. APEX AMS2930 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts for the 2011 Hyundai Veracruz come from 5 brands — FEL-PRO, APEX, BECK/ARNLEY and 2 other brands. The "Popular" part is FEL-PRO MS97227.

Listed part numbers: FEL-PRO MS97227, APEX AMS2932 and BECK/ARNLEY 0374872, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 2011 Hyundai Veracruz come from 5 brands — MELLING, ENGINETECH, QUALCAST and 2 other brands. The "Popular" part is MELLING V3286.

Listed part numbers: MELLING V3286, ENGINETECH IM4468 and QUALCAST 1013286, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

17 Motor Mount parts for the 2011 Hyundai Veracruz come from 7 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 4 other brands. The "Popular" part is ANCHOR 9355.

The Economy section lists 1 option from FAMOUS BRAND — the catalog's value-priced group. FAMOUS BRAND 2010501111 is listed in this group.

In the Standard Replacement grade, ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 3 other brands supply 15 parts: built to original-equipment specification. A representative part number is ANCHOR 9355.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300384.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

104 Oil parts for the 2011 Hyundai Veracruz come from 7 brands — VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. The "Popular" part is MOBIL 125195. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend, with Full Synthetic the largest group at 62 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: AUTOTECNICA HY1419612.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2011 Hyundai Veracruz come from 4 brands — DORMAN, AGS, REIN and 1 other brand. The "Popular" part is DORMAN 090033.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2011 Hyundai Veracruz, from DORMAN, AJUSA, FEL-PRO and 1 other brand. DORMAN 095147 carries the "Popular" badge.

This group includes DORMAN 095147, AJUSA 22007100 and DORMAN 995147CD and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2011 Hyundai Veracruz come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand.

Part numbers include CALORSTAT OC2331, GATES 31083 and MOTORAD MO151, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

32 Oil Filter parts for the 2011 Hyundai Veracruz come from 21 brands — FRAM, CHAMP / LUBER-FINER, FAMOUS BRAND and 18 other brands. The "Popular" part is MOBIL M1C255A. They are grouped as Economy, High Performance / Heavy Duty and Standard Replacement, with Economy the largest group at 16 parts from FAMOUS BRAND, CHAMP / LUBER-FINER, FRAM and 8 other brands.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts are listed for the 2011 Hyundai Veracruz, from FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO 72340 and MAHLE / CLEVITE B33280.

This table covers the Oil Filter covers. Read more

One part is listed for the 2011 Hyundai Veracruz — MOTORAD MO381.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

HYUNDAI supplies both parts for the 2011 Hyundai Veracruz.

Part numbers include HYUNDAI 263453C300 and HYUNDAI 263433C300.

This table covers the Oil Filter housings. Read more

One part is listed for the 2011 Hyundai Veracruz — HYUNDAI 263003C261.

This table covers the oil pans that hold the engine's oil sump. Read more

7 Oil Pan parts are listed for the 2011 Hyundai Veracruz, from SKP, ACKOJA, ATP and 4 other brands. SKP SK264606 carries the "Popular" badge.

Part numbers include SKP SK264606, ACKOJA A520278 and ATP 103419, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts for the 2011 Hyundai Veracruz come from 4 brands — VICTOR REINZ, APEX, FEL-PRO and 1 other brand. The "Popular" part is VICTOR REINZ 703141410.

Part numbers include VICTOR REINZ 703141410, APEX AOP293 and FEL-PRO OS30822, among others listed above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

5 Oil Pump parts for the 2011 Hyundai Veracruz come from 5 brands — ENGINETECH, SKP, HYUNDAI and 2 other brands.

The Economy section: 2 options from ENGINETECH and SKP. ENGINETECH EPK146 is listed in this group.

Standard Replacement: 3 parts, from HYUNDAI, MELLING and TOPLINE. A representative part number is HYUNDAI 213103C300.

This group includes ENGINETECH EPK146, SKP SKPM513 and HYUNDAI 213103C300 and the remaining parts above.