2012 Hyundai Santa Fe Interior Parts

This table covers the Accelerator Pedal position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

2 Accelerator Pedal Position Sensor parts are listed for the 2012 Hyundai Santa Fe, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2012 Santa Fe.

Part numbers include STANDARD MOTOR PRODUCTS APS318 and WELLS 5S13056.

This table covers the clocksprings that carry airbag and steering-wheel circuits through the column. Read more

2 Air Bag Clockspring parts for the 2012 Hyundai Santa Fe come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. Every part fits both the 2.4L L4 and the 3.5L V6.

Listed part numbers: STANDARD MOTOR PRODUCTS CSP137 and WELLS 8G1100.

This table covers the dash covers that sit over the instrument panel. Read more

12 Dash Board Cover parts for the 2012 Hyundai Santa Fe come from DASH DESIGNS. The "Popular" part is DASH DESIGNS 24290C. Every part fits both the 2.4L L4 and the 3.5L V6.

In the Carpet grade, DASH DESIGNS supplies 2 parts: grouped under the catalog's "Carpet" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS 24290C.

The Suede section lists 4 options from DASH DESIGNS — grouped under the catalog's "Suede" designation — the notes column spells out what sets them apart. DASH DESIGNS 24290B is listed in this group.

In the Velour grade, DASH DESIGNS supplies 2 parts: grouped under the catalog's "Velour" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS 24290V.

In the Woven grade, DASH DESIGNS supplies 4 parts: grouped under the catalog's "Woven" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS 24290A.

This table covers the Door Panel retainers and clips. Read more

2 Door Panel Retainer / Clip parts for the 2012 Hyundai Santa Fe come from DORMAN. Every part fits both the 2.4L L4 and the 3.5L V6.

Part numbers include DORMAN 963144D and DORMAN 963138D.

This table covers the floor mats cut for this cabin. Read more

7 Floor Mat parts are listed for the 2012 Hyundai Santa Fe, from 3D, ACC and DASH DESIGNS. 3D L1HY0400150 carries the "Popular" badge. All of them fit every engine offered in the 2012 Santa Fe.

The All Weather section lists 3 options from 3D — grouped under the catalog's "All Weather" designation — the notes column spells out what sets them apart. 3D L1HY0400150 is listed in this group.

The Carpet section: 4 options from ACC and DASH DESIGNS. ACC 23048160 is listed in this group.

Listed part numbers: 3D L1HY0400150, 3D L1HY0402150 and 3D L1HY0401150, plus the other parts above.

This table covers the Hood Release cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

3 Hood Release Cable parts are listed for the 2012 Hyundai Santa Fe, from HYUNDAI and DORMAN. All of them fit every engine offered in the 2012 Santa Fe.

Listed part numbers: DORMAN 912111, HYUNDAI 811901R000 and HYUNDAI 811902B100.

This table covers the interior door handles. Typical signs include a handle that works only from one side, or a broken lever inside the housing. Confirm inside vs outside and paint code in the notes. Read more

7 Inside Door Handle parts are listed for the 2012 Hyundai Santa Fe, from DORMAN and TECHPRO. DORMAN 83470 carries the "Popular" badge. All of them fit every engine offered in the 2012 Santa Fe.

Listed part numbers: DORMAN 83470, DORMAN 83472 and DORMAN 83469, plus the other parts above.

This table covers the Radio Installation kits. Read more

3 Radio Installation Kit parts for the 2012 Hyundai Santa Fe come from METRA. Every part fits both the 2.4L L4 and the 3.5L V6.

Part numbers include METRA 957325S, METRA 957361S and METRA 997361S.

This table covers the interfaces that connect an aftermarket radio to the factory harness. Read more

One part is listed for the 2012 Hyundai Santa Fe — METRA AXSWC.

This table covers the aftermarket and replacement seat covers listed for this cabin. Typical signs include split seams, collapsed foam showing through, or a cover that has shrunk off the bolster. Confirm row and material in the notes; many covers are side- and trim-specific. Read more

DASH DESIGNS supplies the 28 Seat Cover parts for the 2012 Hyundai Santa Fe. DASH DESIGNS K020K60O carries the "Popular" badge. Mesh, Neoprene, Neosupreme, Polyester Blend, Tweed and Velour are all represented, and Neosupreme alone accounts for 8 parts.

This table covers the USB / Accessory cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

One part is listed for the 2012 Hyundai Santa Fe — METRA AXUSBHK.

This table covers the motors that drive a window regulator. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

18 Window Motor parts for the 2012 Hyundai Santa Fe come from 6 brands — WAI GLOBAL, AISIN, HYUNDAI and 3 other brands. The "Popular" part is DORMAN 742735. Every part fits both the 2.4L L4 and the 3.5L V6.

The Economy section lists 7 options from ULTRA-POWER, DORMAN, CARDONE and 1 other brand — the catalog's value-priced group. DORMAN 742735 is listed in this group.

In the Standard Replacement grade, AISIN, HYUNDAI and WAI GLOBAL supply 11 parts: built to original-equipment specification. A representative part number is WAI GLOBAL 389488.

This table covers combined regulator-and-motor assemblies for a door. Read more

One part is listed for the 2012 Hyundai Santa Fe — WAI GLOBAL 388926.