2012 Hyundai Veracruz Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN SL260523.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

6 CV Axle parts for the 2012 Hyundai Veracruz come from 4 brands — GSP, TRAKMOTIVE, APWI and 1 other brand. The "Popular" part is APWI HY8376A.

This group includes APWI HY8376A, GSP NCV37504 and CARDONE 663541 and the remaining parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

This group shows a single part: MEVOTECH DX859.

This table covers the bearings and races that support the differential carrier. Read more

10 Differential Carrier Bearing / Race parts for the 2012 Hyundai Veracruz come from 7 brands — WJB / INMOTION PARTS, SKF, SCHAEFFLER and 4 other brands. The "Popular" part is WJB / INMOTION PARTS WTA35.

The Economy section lists 2 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTA35 is listed in this group.

In the Standard Replacement grade, SKF, SCHAEFFLER, BCA and 3 other brands supply 8 parts: built to original-equipment specification. A representative part number is SKF BR35.

This table covers the bearings and races on the differential pinion. Read more

15 Differential Pinion Bearing / Race parts are listed for the 2012 Hyundai Veracruz, from WJB / INMOTION PARTS, NATIONAL, BCA and 3 other brands. WJB / INMOTION PARTS WTM86649 carries the "Popular" badge.

Economy: 5 parts, from WJB / INMOTION PARTS and FAMOUS BRAND. A representative part number is WJB / INMOTION PARTS WTM86649.

The Standard Replacement section: 10 options from NATIONAL, BCA, SCHAEFFLER and 1 other brand. NATIONAL M86610 is listed in this group.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN SL260471.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

2 Drive Shaft parts are listed for the 2012 Hyundai Veracruz, from DORMAN and WJB / INMOTION PARTS.

Listed part numbers: DORMAN 986245 and WJB / INMOTION PARTS WDS86245.

This table covers the flex joints in the driveshaft. Read more

This group shows a single part: MOOG 676.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

13 Gear Oil parts for the 2012 Hyundai Veracruz come from 5 brands — VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. The "Popular" part is MOBIL 104361.

This table covers the Transfer Case Countershaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: SKF BR35.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

12 Transfer Case Fluid parts for the 2012 Hyundai Veracruz come from 4 brands — VALVOLINE, LUCAS OIL, MOBIL and 1 other brand. The "Popular" part is MOBIL 104361.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts are listed for the 2012 Hyundai Veracruz, from SKF and WJB / INMOTION PARTS.

Listed part numbers: SKF 21252A and WJB / INMOTION PARTS WS21252A.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Transfer Case Output Shaft Bearing parts are listed for the 2012 Hyundai Veracruz, from SKF and WJB / INMOTION PARTS.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTLM501310.

The Standard Replacement section: 2 options from SKF. SKF LM501310VP is listed in this group.

Listed part numbers: WJB / INMOTION PARTS WTLM501310, SKF LM501310VP and SKF BR35.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Transfer Case Output Shaft Seal parts for the 2012 Hyundai Veracruz come from 3 brands — SKF, WJB / INMOTION PARTS and NATIONAL. The "Popular" part is SKF 13274A.

Part numbers include SKF 13274A, SKF 17700A and NATIONAL 711180, among others listed above.

This table covers the viscous couplers in the AWD driveline. Read more

One part is listed for the 2012 Hyundai Veracruz — HYUNDAI 4780024700.