22 Engine parts are listed for the 2018 Hyundai H200, in 15 part types, covering the 2.5L L4 DIESEL Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2018 Hyundai H200, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 8 parts of the 22 listed are Cylinder Head Gasket (3 parts), Oil Filter (3 parts) and Crankshaft Seal (2 parts). The other 12 part types cover the remaining 14 parts.
Every part on this page is matched to the 2.5L L4 DIESEL Turbocharged — the only engine offered in the 2018 Hyundai H200.
The most listed brands for 2018 Hyundai H200 engine parts are AJUSA (18 parts), VARIOUS MFR (1 part) and HENGST (1 part), plus 2 more brands. Quality grades include Standard Replacement and Economy.
Each part number listed for the 2018 Hyundai H200 opens a page with every vehicle that part fits.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 54281600 | 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 54281600.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 15048600 | 🇲🇽 MX | Complete Set | View on Amazon |
| AJUSA | 15088900 | 🇲🇽 MX | FrontClockwise | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
AJUSA supplies both parts for the 2018 Hyundai H200.
This group includes AJUSA 15048600 and AJUSA 15088900.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 81045800 | 🇲🇽 MX | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
This group shows a single part: AJUSA 81045800.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 10210800 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA | 10210810 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA | 10210820 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Cylinder Head Gasket parts for the 2018 Hyundai H200 come from AJUSA.
This group includes AJUSA 10210800, AJUSA 10210810 and AJUSA 10210820.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 53086100 | 🇲🇽 MX | Does Not Include Cylinder Head Gasket | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 53086100.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 51092800 | 🇲🇽 MX | Does Not Include Cylinder Head Gasket | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 51092800.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 13282300 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA 13282300.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 22007100 | 🇲🇽 MX | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA 22007100.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR | PG4750 | 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HENGST | H209W | 🇲🇽 MX | Spin-On | View on Amazon |
| WIX | 51067 | 🇲🇽 MX | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
3 Oil Filter parts are listed for the 2018 Hyundai H200, from VARIOUS MFR, HENGST and WIX.
In the Economy grade, VARIOUS MFR supplies 1 part: the catalog's value-priced group. A representative part number is VARIOUS MFR PG4750.
The Standard Replacement section lists 2 options from HENGST and WIX — built to original-equipment specification. HENGST H209W is listed in this group.
Part numbers include VARIOUS MFR PG4750, HENGST H209W and WIX 51067.
Piston Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING | 2C7361 | 🇲🇽 MX | Full SetTop Groove: 2.50 mm | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
This group shows a single part: HASTINGS MANUFACTURING 2C7361.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | JTC12417 | 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA JTC12417.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | OP10129 | 🇲🇽 MX | Supply tube | View on Amazon |
| AJUSA | OPR00198 | 🇲🇽 MX | Return Line | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
AJUSA supplies both parts for the 2018 Hyundai H200.
Listed part numbers: AJUSA OP10129 and AJUSA OPR00198.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 11133900 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2018 Hyundai H200 — AJUSA 11133900.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 85009300 | 🇲🇽 MX | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
One part is listed for the 2018 Hyundai H200 — AJUSA 85009300.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 12026100 | 🇲🇽 MX | View on Amazon | |
| AJUSA | 57047800 | 🇲🇽 MX | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
AJUSA supplies both parts for the 2018 Hyundai H200.
This group includes AJUSA 12026100 and AJUSA 57047800.
Buying Engine Parts for a 2018 Hyundai H200
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 2.5L L4 DIESEL Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Cylinder Head Gasket and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2018 Hyundai H200?
Our catalog currently lists 22 engine parts for the 2018 Hyundai H200 across 15 subcategories and 5 brands, covering the 2.5L L4 DIESEL Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2018 Hyundai H200?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Hyundai H200 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Hyundai H200?
Every part on this page is matched to the 2.5L L4 DIESEL Turbocharged engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Hyundai H200
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.