2020 Hyundai Veloster N Engine Parts

This table covers the Balance shafts. Read more

This group shows a single part: HYUNDAI 233002GGC0.

This table covers the camshafts that open the valves. Read more

One part is listed for the 2020 Hyundai Veloster N — HYUNDAI 241002GTB0.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2020 Hyundai Veloster N — TOPLINE RBHY11L.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2020 Hyundai Veloster N, from MAHLE / CLEVITE and TOPLINE.

Part numbers include MAHLE / CLEVITE CS55400 and TOPLINE CBSHY24.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts for the 2020 Hyundai Veloster N come from 2 brands — TOPLINE and ENGINETECH.

This group includes ENGINETECH BC1030, TOPLINE TWHY11 and TOPLINE MBHY11L.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

This group shows a single part: SKF 99169.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts for the 2020 Hyundai Veloster N come from 7 brands — ACDELCO, MAHLE / CLEVITE, AJUSA and 4 other brands. The "Popular" part is ACDELCO 224200.

This group includes ACDELCO 224200, MAHLE / CLEVITE JV1715 and AJUSA 15056500 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 2020 Hyundai Veloster N, from FEL-PRO, MAHLE / CLEVITE, HYUNDAI and 1 other brand. FEL-PRO ES72486 carries the "Popular" badge.

Listed part numbers: FEL-PRO ES72486, MAHLE / CLEVITE GS33547 and FEL-PRO ES73257, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts are listed for the 2020 Hyundai Veloster N, from ELRING and MAHLE / CLEVITE.

Part numbers include ELRING 204890 and MAHLE / CLEVITE 55399.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts are listed for the 2020 Hyundai Veloster N, from MAHLE / CLEVITE and TOPLINE.

Part numbers include MAHLE / CLEVITE HS55399 and TOPLINE HSHY20GT.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2020 Hyundai Veloster N come from KAT'S HEATERS.

Part numbers include KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2020 Hyundai Veloster N — TOPLINE CGSHY20GT.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 2020 Hyundai Veloster N come from 3 brands — ENGINETECH, MELLING and TOPLINE.

This group includes ENGINETECH EM4435, MELLING V5836 and TOPLINE EVHY11.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 2020 Hyundai Veloster N, from ATP, DORMAN, HL MANDO and 1 other brand.

This group includes ATP 102422, DORMAN 594768 and HL MANDO 30A5034 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Hyundai Veloster N — FEL-PRO MS97640.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 2020 Hyundai Veloster N come from 5 brands — MELLING, ENGINETECH, QUALCAST and 2 other brands. The "Popular" part is MELLING V3255.

Listed part numbers: MELLING V3255, ENGINETECH IM4436 and QUALCAST 1013190, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Motor Mount parts for the 2020 Hyundai Veloster N come from 3 brands — ANCHOR, PIONEER and WESTAR.

Listed part numbers: ANCHOR 10029, PIONEER 610029 and WESTAR EM7395.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300735.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

30 Oil parts for the 2020 Hyundai Veloster N come from 5 brands — MOBIL, LIQUI MOLY, IDEMITSU and 2 other brands. The "Popular" part is MOBIL 125195. They are grouped as Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 24 parts from LIQUI MOLY, MOBIL, IDEMITSU and 2 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

5 Oil Cooler parts for the 2020 Hyundai Veloster N come from 5 brands — AUTOTECNICA, ACKOJA, DORMAN and 2 other brands. The "Popular" part is AUTOTECNICA HY1421719.

Part numbers include AUTOTECNICA HY1421719, ACKOJA A52600020 and DORMAN 918907, among others listed above.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2020 Hyundai Veloster N come from 4 brands — DORMAN, AGS, REIN and 1 other brand. The "Popular" part is DORMAN 090033.

Listed part numbers: DORMAN 090033, DORMAN 090053 and AGS ODP00007, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 2020 Hyundai Veloster N, from DORMAN, FEL-PRO and ULTRA-POWER.

Part numbers include DORMAN 095147, DORMAN 995147CD and FEL-PRO 73346, among others listed above.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2020 Hyundai Veloster N come from 2 brands — GATES and MOTORAD.

This group includes GATES 31083 and MOTORAD MO151.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2020 Hyundai Veloster N come from 14 brands — BOSCH, VARIOUS MFR, WIX and 11 other brands. The "Popular" part is WIX 51334XP.

The Economy section lists 5 options from BOSCH, FRAM, FVP and 2 other brands — the catalog's value-priced group. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51334XP is listed in this group.

In the Standard Replacement grade, ACDELCO, BOSCH, DENSO and 7 other brands supply 11 parts: built to original-equipment specification. A representative part number is BOSCH 3312.

This table covers the Oil nozzles. Read more

This group shows a single part: MELLING 5470N.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts for the 2020 Hyundai Veloster N come from 3 brands — ACKOJA, MELLING and SEALED POWER.

Part numbers include ACKOJA A520590, MELLING M577 and SEALED POWER 22443705.

This table covers the chains that drive the oil pump. Read more

4 Oil Pump Chain parts are listed for the 2020 Hyundai Veloster N, from MELLING and S.A. GEAR.

In the Kit grade, MELLING and S.A. GEAR supply 2 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is MELLING 31231S.

The Standard Replacement section: 2 options from MELLING and S.A. GEAR. MELLING 1231 is listed in this group.

Listed part numbers: MELLING 31231S, S.A. GEAR 76457P and MELLING 1231, plus the other parts above.

This table covers the Oil Pump Chain guides. Read more

2 Oil Pump Chain Guide parts are listed for the 2020 Hyundai Veloster N, from MELLING and S.A. GEAR.

This group includes MELLING BG7057 and S.A. GEAR 71309.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Oil Pump Chain Tensioner parts for the 2020 Hyundai Veloster N come from 3 brands — HYUNDAI, MELLING and S.A. GEAR.

This group includes HYUNDAI 244712GGA1, MELLING BT7066 and S.A. GEAR 91415.

This table covers the rings that seal each piston to the cylinder wall. Read more

2 Piston Ring parts are listed for the 2020 Hyundai Veloster N, from ENGINETECH and TOPLINE.

The Premium section lists 1 option from ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH M86024 is listed in this group.

The Standard Replacement section: 1 option from TOPLINE. TOPLINE RSHY20GT is listed in this group.

This group includes ENGINETECH M86024 and TOPLINE RSHY20GT.

This table covers the Thrust washers. Read more

This group shows a single part: ENGINETECH TW1041.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: HYUNDAI 244702G803.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts are listed for the 2020 Hyundai Veloster N, from S.A. GEAR, CLOYES, HYUNDAI and 2 other brands. S.A. GEAR C1087 carries the "Popular" badge.

Listed part numbers: S.A. GEAR C1087, CLOYES C976 and HYUNDAI 243212G111, plus the other parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

9 Timing Chain & Component Kit parts for the 2020 Hyundai Veloster N come from 5 brands — S.A. GEAR, INA, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is S.A. GEAR 76311TS.

The Economy section: 5 options from S.A. GEAR and ITM ENGINE COMPONENTS. S.A. GEAR 76311TS is listed in this group.

Standard Replacement: 4 parts, from INA, ENGINETECH and MELLING. A representative part number is ENGINETECH TS2024.

This group includes S.A. GEAR 76311TS, ITM ENGINE COMPONENTS 05391903 and S.A. GEAR 76457T and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

9 Timing Chain Guide / Damper parts are listed for the 2020 Hyundai Veloster N, from S.A. GEAR, CLOYES, HYUNDAI and 1 other brand. S.A. GEAR 91194 carries the "Popular" badge.

This group includes S.A. GEAR 91194, S.A. GEAR 71142 and CLOYES 96121 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

7 Timing Chain Tensioner parts for the 2020 Hyundai Veloster N come from 5 brands — HYUNDAI, MELLING, S.A. GEAR and 2 other brands. The "Popular" part is HYUNDAI 244102G810.

Part numbers include HYUNDAI 244102G810, S.A. GEAR 91195 and CLOYES 96117, among others listed above.

This table covers the Timing covers. Read more

One part is listed for the 2020 Hyundai Veloster N — ACKOJA A520550.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 67825.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

4 Timing Crank Sprocket parts for the 2020 Hyundai Veloster N come from 2 brands — MELLING and S.A. GEAR.

Part numbers include MELLING S1291, MELLING S1520 and S.A. GEAR S1364, among others listed above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts are listed for the 2020 Hyundai Veloster N, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Listed part numbers: ANCHOR 10136, DEA / MARMON RIDE CONTROL A71100 and PIONEER 630136, plus the other parts above.

This table covers the turbochargers that compress intake air. Read more

This group shows a single part: HYUNDAI 282312GTB1.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Turbocharger Boost Sensor parts are listed for the 2020 Hyundai Veloster N, from NTK and WELLS.

Listed part numbers: NTK MA0054 and WELLS 5S13369.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Hyundai Veloster N — MAHLE / CLEVITE GS33760.

This table covers the Valve covers. Read more

One part is listed for the 2020 Hyundai Veloster N — HYUNDAI 224002GGB0.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts for the 2020 Hyundai Veloster N come from 3 brands — BECK/ARNLEY, FEL-PRO and MAHLE / CLEVITE.

Part numbers include BECK/ARNLEY 0362098, FEL-PRO VS51015R and MAHLE / CLEVITE VS50892.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

3 Valve Guide parts for the 2020 Hyundai Veloster N come from 3 brands — QUALCAST, SBI and TOPLINE.

This group includes QUALCAST 303154, SBI 1403154 and TOPLINE VGHY11.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts are listed for the 2020 Hyundai Veloster N, from HYUNDAI and MELLING.

Part numbers include HYUNDAI 2222125020 and MELLING VS2277.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

4 Valve Spring Retainer Keeper parts are listed for the 2020 Hyundai Veloster N, from HYUNDAI, MELLING, QUALCAST and 1 other brand.

Listed part numbers: HYUNDAI 2222302500, MELLING VL1060 and QUALCAST 345008, plus the other parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Valve Stem Seal parts for the 2020 Hyundai Veloster N come from 6 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 3 other brands. The "Popular" part is APEX AVS2085.

This group includes APEX AVS2085, FEL-PRO SS71268 and MAHLE / CLEVITE SS45992 and the remaining parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

13 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2020 Hyundai Veloster N come from 12 brands — HYUNDAI, SKP, DORMAN and 9 other brands. The "Popular" part is SKP SK918036.

The Economy section: 6 options from SKP, DORMAN, HOLSTEIN and 3 other brands. SKP SK918036 is listed in this group.

Standard Replacement: 7 parts, from HYUNDAI, NTK, BECK/ARNLEY and 3 other brands. A representative part number is HYUNDAI 243602GGD0.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

5 Variable Valve Timing (VVT) Sprocket parts for the 2020 Hyundai Veloster N come from 5 brands — DORMAN, ULTRA-POWER, HYUNDAI and 2 other brands. The "Popular" part is HYUNDAI 243702G750.

The Economy section: 2 options from DORMAN and ULTRA-POWER. DORMAN 918701 is listed in this group.

Standard Replacement: 3 parts, from HYUNDAI, ACKOJA and S.A. GEAR. A representative part number is HYUNDAI 243702G750.

Listed part numbers: HYUNDAI 243702G750 and DORMAN 918701, plus the other parts above.