6 Wheel parts are listed for the 2024 Ineos Grenadier, in 2 part types, covering the 3.0L L6 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The wheel hardware on the 2024 Ineos Grenadier covers lug nuts, studs, hub caps, TPMS sensors and trim rings. All 6 listed parts are Tire Pressure Monitoring System (TPMS) Sensor (3 parts) and Tire Pressure Monitoring System (TPMS) Stem / Service Kit (3 parts).
The 2024 Ineos Grenadier came with a single engine, the 3.0L L6 Turbocharged, and every part is verified against it.
4 brands supply wheel parts for the 2024 Ineos Grenadier, led by BH SENS (2 parts), BOSCH (2 parts) and VDO / CONTINENTAL (1 part), plus 1 more brand. Quality grades include OE Replacement and Aftermarket / Multi-Application.
Each part number listed for the 2024 Ineos Grenadier opens a page with every vehicle that part fits.
Tire Pressure Monitoring System (TPMS) Sensor
Aftermarket / Multi-Application (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VDO / CONTINENTAL | SE10008 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Redi-Sensor433.92 MHz | View on Amazon |
OE Replacement (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS | RDE222V21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Quality 433MHZ Replacement SensorIncludes RDV021 Silver 43mm Metal Valve | View on Amazon |
| BH SENS | RDE038V21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Quality 433MHZ Replacement Sensor | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
3 Tire Pressure Monitoring System (TPMS) Sensor parts are listed for the 2024 Ineos Grenadier, from BH SENS and VDO / CONTINENTAL.
In the Aftermarket / Multi-Application (Programmed) grade, VDO / CONTINENTAL supplies 1 part: grouped under the catalog's "Aftermarket / Multi-Application (Programmed)" designation — the notes column spells out what sets them apart. A representative part number is VDO / CONTINENTAL SE10008.
The OE Replacement (Programmed) section lists 2 options from BH SENS — manufactured to match the original-equipment part in form, fit and function. BH SENS RDE222V21 is listed in this group.
This group includes VDO / CONTINENTAL SE10008, BH SENS RDE222V21 and BH SENS RDE038V21.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH | QFP085 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tire Pressure Monitoring System (TPMS) Sensor | View on Amazon |
| BOSCH | QFP086 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tire Pressure Monitoring System (TPMS) Sensor | View on Amazon |
| DILL AIR CONTROL | 7020K | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensor Service KitOE KIT (2PC SEAL AND WASHER) | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
3 Tire Pressure Monitoring System (TPMS) Stem / Service Kit parts for the 2024 Ineos Grenadier come from 2 brands — BOSCH and DILL AIR CONTROL.
Listed part numbers: BOSCH QFP085, BOSCH QFP086 and DILL AIR CONTROL 7020K.
Buying Wheel Parts for a 2024 Ineos Grenadier
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Confirm you have the 3.0L L6 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tire Pressure Monitoring System (TPMS) Sensor and Tire Pressure Monitoring System (TPMS) Stem / Service Kit .
Frequently Asked Questions
How many wheel parts fit the 2024 Ineos Grenadier?
Our catalog currently lists 6 wheel parts for the 2024 Ineos Grenadier across 2 subcategories and 4 brands, covering the 3.0L L6 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of wheel problems on a 2024 Ineos Grenadier?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2024 Ineos Grenadier was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2024 Ineos Grenadier?
Every part on this page is matched to the 3.0L L6 Turbocharged engine. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2024 Ineos Grenadier
Wheel Parts for Other Ineos Grenadier Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.