The 2021 Infiniti Q50 has 153 engine parts with verified fitment on this page — 30 part types and 48 brands, covering both the 3.0L V6 Turbocharged and the 3.5L V6 ELECTRIC/GAS. Each part includes a manufacturer part number and application notes.
The engine on the 2021 Infiniti Q50 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil (33 parts), Oil Filter (16 parts) and Motor Mount (10 parts). The other 27 part types cover the remaining 94 parts.
The 2021 Infiniti Q50 was sold with both the 3.0L V6 Turbocharged and the 3.5L V6 ELECTRIC/GAS. 16 parts fit every engine; the other 137 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2021 Infiniti Q50 engine parts are AJUSA (34 parts), VALVOLINE (9 parts) and LIQUI MOLY (8 parts), plus 45 more brands. Quality grades include Standard Replacement, Economy and High Performance.
17 parts on this 2021 Infiniti Q50 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including FEL-PRO BS40694 (Crankshaft Seal) and TECHPRO IN1228131 (Engine Cover). Click any part number to see every vehicle that part fits.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 3.0L V6 Turbocharged | RBD41HR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: TOPLINE RBD41HR.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 54338800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 54212000 | 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Conversion / Lower Gasket Set parts for the 2021 Infiniti Q50 come from AJUSA.
Listed part numbers: AJUSA 54338800 and AJUSA 54212000.
Crankshaft Main Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: all 2021 Q50 engines | MB4524XPC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Setpmaxkote, polymer coated | View on Amazon |
| KING ENGINE BEARINGS Fits: all 2021 Q50 engines | MB4524XPCX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Setpmaxkote, polymer coated | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: all 2021 Q50 engines | MB4524SI | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | BI-Metal (aluminum silicon base)Set | View on Amazon |
| TOPLINE Fits: 3.0L V6 Turbocharged | MBD41HR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
4 Crankshaft Main Bearing parts are listed for the 2021 Infiniti Q50, from KING ENGINE BEARINGS and TOPLINE. 3 parts fit every engine; the other 1 is engine-specific.
In the High Performance grade, KING ENGINE BEARINGS supplies 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS MB4524XPC.
The Standard Replacement section lists 2 options from KING ENGINE BEARINGS and TOPLINE — built to original-equipment specification. KING ENGINE BEARINGS MB4524SI is listed in this group.
Listed part numbers: KING ENGINE BEARINGS MB4524XPC, KING ENGINE BEARINGS MB4524XPCX and KING ENGINE BEARINGS MB4524SI, plus the other parts above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.0L V6 Turbocharged | BS40694 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| AJUSA Fits: all 2021 Q50 engines | 15060100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
| AJUSA Fits: all 2021 Q50 engines | 15092900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontClockwise | View on Amazon |
| JAPANESE OE Fits: 3.0L V6 Turbocharged | N2348 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Musashi | View on Amazon |
| SKF Fits: 3.0L V6 Turbocharged | 33007 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Crankshaft Seal parts are listed for the 2021 Infiniti Q50, from AJUSA, FEL-PRO, JAPANESE OE and 1 other brand. FEL-PRO BS40694 carries the "Popular" badge. 2 parts fit every engine; the other 3 are engine-specific.
Part numbers include FEL-PRO BS40694, AJUSA 15060100 and AJUSA 15092900, among others listed above.
Crankshaft Thrust Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: all 2021 Q50 engines | TW1042AM | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | BI-Metal (aluminum base) | View on Amazon |
| TOPLINE Fits: 3.0L V6 Turbocharged | TWD41HR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thrust Bearing | View on Amazon |
This table covers the Crankshaft Thrust washers.
2 Crankshaft Thrust Washer parts for the 2021 Infiniti Q50 come from 2 brands — KING ENGINE BEARINGS and TOPLINE. 1 part fits every engine; the other 1 is engine-specific.
This group includes KING ENGINE BEARINGS TW1042AM and TOPLINE TWD41HR.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 81086100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 81062500 | 🇲🇽 MX | View on Amazon | |
| TOPLINE Fits: 3.0L V6 Turbocharged | HBD34 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
3 Cylinder Head Bolt parts for the 2021 Infiniti Q50 come from 2 brands — AJUSA and TOPLINE.
Part numbers include AJUSA 81086100, AJUSA 81062500 and TOPLINE HBD34.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 10275500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 10275600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 52654300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 52654400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 10181300 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 10181200 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 52407800 | 🇲🇽 MX | Right | View on Amazon |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 52407900 | 🇲🇽 MX | Left | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
8 Cylinder Head Gasket parts for the 2021 Infiniti Q50 come from AJUSA.
Listed part numbers: AJUSA 10275500, AJUSA 10275600 and AJUSA 52654300, plus the other parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 52654200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Complete Set | View on Amazon |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 52407700 | 🇲🇽 MX | Complete Set | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Cylinder Head Gasket Set parts for the 2021 Infiniti Q50 come from AJUSA.
This group includes AJUSA 52654200 and AJUSA 52407700.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Popular Fits: all 2021 Q50 engines | IN1228131 | 🇺🇸 US 🇲🇽 MX | LowerRWD | View on Amazon |
| TECHPRO Fits: 3.0L V6 Turbocharged | IN1228132 | 🇺🇸 US 🇨🇦 CA | CAPA Certified | View on Amazon |
| VARIOUS MFR Fits: 3.0L V6 Turbocharged | IN1228130 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CAPA Certified | View on Amazon |
| VARIOUS MFR Fits: all 2021 Q50 engines | IN1228131 | 🇺🇸 US 🇲🇽 MX | LowerRWD | View on Amazon |
| VARIOUS MFR Fits: 3.0L V6 Turbocharged | IN1228132 | 🇺🇸 US 🇨🇦 CA | CAPA Certified | View on Amazon |
This table covers the Engine covers.
5 Engine Cover parts for the 2021 Infiniti Q50 come from 2 brands — VARIOUS MFR and TECHPRO. The "Popular" part is TECHPRO IN1228131. 2 parts fit every engine; the other 3 are engine-specific.
This group includes TECHPRO IN1228131, TECHPRO IN1228132 and VARIOUS MFR IN1228130 and the remaining parts above.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 50582800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 50369700 | 🇲🇽 MX | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Engine Kit Gasket Set parts for the 2021 Infiniti Q50 come from AJUSA.
This group includes AJUSA 50582800 and AJUSA 50369700.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 13347100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 13347200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 13241200 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Intake Manifold Gasket parts for the 2021 Infiniti Q50 come from AJUSA.
Part numbers include AJUSA 13347100, AJUSA 13347200 and AJUSA 13241200.
Motor Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 3.0L V6 Turbocharged | SKM9774 | 🇺🇸 US 🇲🇽 MX | Fits Front RightRWD | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DEA / MARMON RIDE CONTROL Popular Fits: 3.0L V6 Turbocharged | A4370 | 🇺🇸 US 🇨🇦 CA | Fits Front RightAWD | View on Amazon |
| ANCHOR Fits: 3.0L V6 Turbocharged | 9774 | 🇺🇸 US 🇲🇽 MX | Fits Front LeftRWD | View on Amazon |
| ANCHOR Fits: 3.0L V6 Turbocharged | 9859 | 🇺🇸 US 🇨🇦 CA | Fits Front RightAWD | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.0L V6 Turbocharged | A4379 | 🇺🇸 US 🇲🇽 MX | Fits Front RightRWD | View on Amazon |
| PIONEER Fits: 3.0L V6 Turbocharged | 619859 | 🇺🇸 US 🇨🇦 CA | Fits Front LeftEssential Tech or Luxe Model or Pure Model or Red Sport I-Line or Red Sport I-Line ProACTIVE or Sensory or Signature Edition or Sport Tech | View on Amazon |
| PIONEER Fits: 3.0L V6 Turbocharged | 619774 | 🇺🇸 US 🇲🇽 MX | Fits Front LeftRWD | View on Amazon |
| WESTAR Fits: 3.0L V6 Turbocharged | EM7008 | 🇺🇸 US 🇲🇽 MX | FrontRWD | View on Amazon |
| WESTAR Fits: 3.0L V6 Turbocharged | EM7193 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIONEER Fits: 3.5L V6 ELECTRIC/GAS | 619774 | 🇲🇽 MX | Fits Front Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
10 Motor Mount parts are listed for the 2021 Infiniti Q50, from PIONEER, DEA / MARMON RIDE CONTROL, ANCHOR and 2 other brands. SKP SKM9774 carries the "Popular" badge.
In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKM9774.
The Standard Replacement section: 8 options from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. DEA / MARMON RIDE CONTROL A4370 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 3.0L V6 Turbocharged | 301058 | 🇺🇸 US 🇨🇦 CA | AWD | View on Amazon |
This table covers the Motor Mount kits.
One part is listed for the 2021 Infiniti Q50 — ANCHOR 301058.
Oil
Summary: Notes list SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE, LIQUI MOLY and MOBIL.
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: 3.0L V6 Turbocharged | 2208 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 0W-205 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: 3.0L V6 Turbocharged | 20438 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 0W-205 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: 3.0L V6 Turbocharged | 22046 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-205 Liter | View on Amazon |
| MOBIL Popular Fits: 3.0L V6 Turbocharged | 125197 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic 0W-20Mobil Full Synthetic | View on Amazon |
| MOBIL Popular Fits: 3.0L V6 Turbocharged | 124184 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0W-20Mobil 1 Advanced Fuel Economy | View on Amazon |
| VALVOLINE Popular Fits: 3.0L V6 Turbocharged | VV916 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| IDEMITSU Fits: 3.0L V6 Turbocharged | 30015203750 | 🇺🇸 US | IFG3 0W-20 SP/Motor Oil1 Quart | View on Amazon |
| IDEMITSU Fits: 3.0L V6 Turbocharged | 30016051750 | 🇺🇸 US | IFG3 0W-20 SQ/GF-7A1 Quart | View on Amazon |
| IDEMITSU Fits: 3.0L V6 Turbocharged | 30016051953 | 🇺🇸 US | IFG3 0W-20 SQ/GF-7A5 Quart | View on Amazon |
| LIQUI MOLY Fits: 3.0L V6 Turbocharged | 2207 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special TEC AA 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.0L V6 Turbocharged | 20436 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.0L V6 Turbocharged | 22044 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.0L V6 Turbocharged | 22190 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6610 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.0L V6 Turbocharged | 22048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-2020 Liter | View on Amazon |
| LUCAS OIL Fits: 3.0L V6 Turbocharged | 10564 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FULL SYNTHETIC MOTOR OIL SAE 0W-201 qt | View on Amazon |
| LUCAS OIL Fits: 3.0L V6 Turbocharged | 18003 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic Motor Oil SAE 0W-206 Gallon | View on Amazon |
| MOBIL Fits: 3.0L V6 Turbocharged | 120926 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance 0W-20Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: 3.0L V6 Turbocharged | 125386 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ESP X2 0W-20ESP X2 Full Synthetic Motor Oil 0W-20, 1 Quart | View on Amazon |
| PENTOSIN Fits: 3.0L V6 Turbocharged | 8044210 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0W-20-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: 3.0L V6 Turbocharged | 8044317 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pento Speed FESAE 0W-20 | View on Amazon |
| PENTOSIN Fits: 3.0L V6 Turbocharged | 8044212 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0W-20-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| PENTOSIN Fits: 3.0L V6 Turbocharged | 8044319 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pento Speed FESAE 0W-20 | View on Amazon |
| VALVOLINE Fits: 3.0L V6 Turbocharged | 904536 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.0L V6 Turbocharged | 891682 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.0L V6 Turbocharged | 904538 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 0W-205 Quart | View on Amazon |
| VALVOLINE Fits: 3.0L V6 Turbocharged | 881150 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 0W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.0L V6 Turbocharged | 898664 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hybrid Vehicle Full Synthetic SAE 0W-205 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Fits: 3.0L V6 Turbocharged | 125203 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage 0W-20Mobil Full Synthetic | View on Amazon |
| MOBIL Fits: 3.0L V6 Turbocharged | 122535 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Mileage 0W-20Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 3.0L V6 Turbocharged | 123836 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance High Mileage 0W-20Extended Performance High Mileage Synthetic Motor Oil 0W-20, 1 Quart | View on Amazon |
| VALVOLINE Fits: 3.0L V6 Turbocharged | 833002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.0L V6 Turbocharged | 852400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.0L V6 Turbocharged | 881168 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 0W-20Easy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
33 Oil parts are listed for the 2021 Infiniti Q50, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. LIQUI MOLY 2208 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 27 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.
Oil Cooler Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SUNSONG Fits: 3.0L V6 Turbocharged | 5801908 | 🇺🇸 US 🇲🇽 MX | RWDReturn - First Rubber Segment - Engine Bracket To pipe | View on Amazon |
| SUNSONG Fits: 3.0L V6 Turbocharged | 5801894 | 🇺🇸 US 🇲🇽 MX | RWDEngine to Oil Pipe | View on Amazon |
| SUNSONG Fits: all 2021 Q50 engines | 5801904 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Pressure Hose - Center Rubber Segment-pipe To pip | View on Amazon |
| SUNSONG Fits: 3.0L V6 Turbocharged | 5801899 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Return Hose Center Rubber Segment - pipe To pipe | View on Amazon |
This table covers the Oil Cooler lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
SUNSONG supplies the 4 Oil Cooler Line parts for the 2021 Infiniti Q50. 1 part fits every engine; the other 3 are engine-specific.
This group includes SUNSONG 5801908, SUNSONG 5801894 and SUNSONG 5801904 and the remaining parts above.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Fits: 3.0L V6 Turbocharged | 0160116 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Gasket | View on Amazon |
| DORMAN Fits: all 2021 Q50 engines | 090038 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | StandardM12-1.25 | View on Amazon |
| DORMAN Fits: all 2021 Q50 engines | 090049 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pilot PointM12-1.25 | View on Amazon |
| ENGINETECH Fits: 3.5L V6 ELECTRIC/GAS | DP7738X | 🇲🇽 MX | View on Amazon | |
| REIN Fits: all 2021 Q50 engines | HWU0112 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the drain plugs in the oil pan.
5 Oil Drain Plug parts are listed for the 2021 Infiniti Q50, from DORMAN, BECK/ARNLEY, ENGINETECH and 1 other brand. 3 parts fit every engine; the other 2 are engine-specific.
This group includes BECK/ARNLEY 0160116, DORMAN 090038 and DORMAN 090049 and the remaining parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 01140600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Original Equipment (OE) # 11026-BX000 | View on Amazon |
| DORMAN Fits: all 2021 Q50 engines | 097134 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SizeM10 | View on Amazon |
| DORMAN Fits: all 2021 Q50 engines | 997134CD | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 3.0L V6 Turbocharged | 73347 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0.500 (in) Inside Diameter x 0.750 (in) Outside DiameterCopper | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Drain Plug Gasket parts for the 2021 Infiniti Q50 come from 3 brands — DORMAN, AJUSA and FEL-PRO. 2 parts fit every engine; the other 2 are engine-specific.
This group includes AJUSA 01140600, DORMAN 097134 and DORMAN 997134CD and the remaining parts above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Fits: 3.0L V6 Turbocharged | 31115 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTORAD Fits: 3.0L V6 Turbocharged | MO107 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SKP Fits: 3.0L V6 Turbocharged | SKMO107 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the caps on the oil filler neck.
3 Oil Filler Cap parts are listed for the 2021 Infiniti Q50, from GATES, MOTORAD and SKP.
Listed part numbers: GATES 31115, MOTORAD MO107 and SKP SKMO107.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Fits: 3.0L V6 Turbocharged | 72230WS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Workshop Oil Filter | View on Amazon |
| FRAM Fits: 3.0L V6 Turbocharged | FE6607 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FVP Fits: 3.0L V6 Turbocharged | R1358 | 🇺🇸 US 🇨🇦 CA | OE# 15208-65F0E | View on Amazon |
| PRO-TEC Fits: 3.0L V6 Turbocharged | PXL51358 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VARIOUS MFR Fits: all 2021 Q50 engines | PG4612 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 3.5L V6 ELECTRIC/GAS | PO4612NS1 | 🇲🇽 MX | OE Style | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 3.0L V6 Turbocharged | M1108A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance | View on Amazon |
| WIX Fits: 3.0L V6 Turbocharged | 51358XP | 🇺🇸 US 🇨🇦 CA | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Popular Fits: 3.0L V6 Turbocharged | 3300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium Oil Filter | View on Amazon |
| WIX Popular Fits: 3.0L V6 Turbocharged | 51358 | 🇺🇸 US 🇨🇦 CA | Bypass Relief Valve Setting: 11-14 PSI | View on Amazon |
| BECK/ARNLEY Fits: 3.0L V6 Turbocharged | 0418136 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HASTINGS / BALDWIN Fits: 3.0L V6 Turbocharged | LF113 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Red Sport 400 or Red Sport I-Line or Red Sport I-Line ProACTIVE or Sport Plus | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L V6 Turbocharged | OC1566 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On | View on Amazon |
| MANN Fits: 3.0L V6 Turbocharged | MW64 | 🇺🇸 US 🇨🇦 CA | Height: 2.6 InStyle: Spin-On Lube Filter | View on Amazon |
| MOTORCRAFT Fits: 3.0L V6 Turbocharged | FL816 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Twin-TurboSynthetic Oil Application | View on Amazon |
| VARIOUS MFR Fits: all 2021 Q50 engines | PG4612EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
16 Oil Filter parts are listed for the 2021 Infiniti Q50, from VARIOUS MFR, BOSCH, WIX and 9 other brands. MOBIL M1108A carries the "Popular" badge. 2 parts fit every engine; the other 14 are engine-specific.
Economy: 6 parts, from VARIOUS MFR, BOSCH, FRAM and 2 other brands. A representative part number is BOSCH 72230WS.
In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1108A.
The Standard Replacement section: 8 options from BOSCH, WIX, BECK/ARNLEY and 5 other brands. BOSCH 3300 is listed in this group.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SPECTRA PREMIUM Fits: 3.0L V6 Turbocharged | NSP49A | 🇺🇸 US 🇨🇦 CA | LowerAWD | View on Amazon |
| SPECTRA PREMIUM Fits: 3.0L V6 Turbocharged | NSP48A | 🇺🇸 US 🇲🇽 MX | LowerRWD | View on Amazon |
| SPECTRA PREMIUM Fits: 3.5L V6 ELECTRIC/GAS | NSP31A | 🇲🇽 MX | LowerGasket and/or Sealant Not Included | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
3 Oil Pan parts for the 2021 Infiniti Q50 come from SPECTRA PREMIUM.
This group includes SPECTRA PREMIUM NSP49A, SPECTRA PREMIUM NSP48A and SPECTRA PREMIUM NSP31A.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 14123000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: 3.0L V6 Turbocharged | 703141410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RTV Silicone | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pan Gasket parts are listed for the 2021 Infiniti Q50, from AJUSA and VICTOR REINZ.
Part numbers include AJUSA 14123000 and VICTOR REINZ 703141410.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 3.0L V6 Turbocharged | 18857 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2021 Infiniti Q50 — SKF 18857.
Turbocharger
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GPD Popular Fits: 3.0L V6 Turbocharged | 2511596 | 🇺🇸 US | LeftRed Sport 400 | View on Amazon |
| GPD Popular Fits: 3.0L V6 Turbocharged | 2511605 | 🇺🇸 US | RightRed Sport 400 | View on Amazon |
| GPD Fits: 3.0L V6 Turbocharged | 2511589 | 🇺🇸 US 🇨🇦 CA | RightLuxe Model or Pure Model or Sensory or Signature Edition | View on Amazon |
| GPD Fits: 3.0L V6 Turbocharged | 2511624 | 🇺🇸 US 🇨🇦 CA | LeftLuxe Model or Pure Model or Signature Edition | View on Amazon |
| ROTOMASTER Fits: 3.0L V6 Turbocharged | A1140108N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightEssential Tech or Luxe Model or Pure Model or Sensory or Signature Edition or Sport Plus or Sport Tech | View on Amazon |
| ROTOMASTER Fits: 3.0L V6 Turbocharged | A1140109N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftEssential Tech or Luxe Model or Pure Model or Sensory or Signature Edition or Sport Plus or Sport Tech | View on Amazon |
This table covers the turbochargers that compress intake air.
6 Turbocharger parts are listed for the 2021 Infiniti Q50, from GPD and ROTOMASTER. GPD 2511596 carries the "Popular" badge.
Listed part numbers: GPD 2511596, GPD 2511605 and GPD 2511589, plus the other parts above.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | JTC12789 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA JTC12789.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | OP11415 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right SideSupply Tube | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | OP11465 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left SideSupply Tube | View on Amazon |
| GATES Fits: 3.0L V6 Turbocharged | TL285 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightSupply Line | View on Amazon |
| GATES Fits: 3.0L V6 Turbocharged | TL286 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftSupply Line | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
4 Turbocharger Oil Line parts are listed for the 2021 Infiniti Q50, from AJUSA and GATES.
Part numbers include AJUSA OP11415, AJUSA OP11465 and GATES TL285, among others listed above.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.5L V6 ELECTRIC/GAS | 264780 | 🇲🇽 MX | Right | View on Amazon |
| DORMAN Fits: 3.5L V6 ELECTRIC/GAS | 264779 | 🇲🇽 MX | Left | View on Amazon |
This table covers the Valve covers.
2 Valve Cover parts for the 2021 Infiniti Q50 come from DORMAN.
Listed part numbers: DORMAN 264780 and DORMAN 264779.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 11181700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 11181800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 56041300 | 🇲🇽 MX | Right | View on Amazon |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 56041200 | 🇲🇽 MX | Left | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
AJUSA supplies the 4 Valve Cover Gasket parts for the 2021 Infiniti Q50.
Listed part numbers: AJUSA 11181700, AJUSA 11181800 and AJUSA 56041300, plus the other parts above.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 3.0L V6 Turbocharged | VL730 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: 3.0L V6 Turbocharged | 345012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1 Round Groove | View on Amazon |
| SBI Fits: 3.0L V6 Turbocharged | 1211064 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2490 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
3 Valve Spring Retainer Keeper parts for the 2021 Infiniti Q50 come from 3 brands — MELLING, QUALCAST and SBI.
Listed part numbers: MELLING VL730, QUALCAST 345012 and SBI 1211064.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 Turbocharged | 12009100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 4.5 x 9.3 x 11.5 | View on Amazon |
| AJUSA Fits: 3.0L V6 Turbocharged | 57097900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 12012100 | 🇲🇽 MX | 5 x 9.7 x 11.5 | View on Amazon |
| AJUSA Fits: 3.5L V6 ELECTRIC/GAS | 57058800 | 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 3.0L V6 Turbocharged | SS72800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Valve Stem Seal parts are listed for the 2021 Infiniti Q50, from AJUSA and FEL-PRO.
Part numbers include AJUSA 12009100, AJUSA 57097900 and AJUSA 12012100, among others listed above.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Fits: 3.0L V6 Turbocharged | VVS247 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| HOLSTEIN Fits: 3.0L V6 Turbocharged | 2VTS0279 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HOLSTEIN Fits: 3.0L V6 Turbocharged | 2VTS0269 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Housing Material: Metal, Plastic | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Popular Fits: 3.0L V6 Turbocharged | A380327 | 🇺🇸 US 🇨🇦 CA | Luxe Model or Pure Model or Red Sport 400 or Sensory or Signature Editionwith OE No. 237963RC0A | View on Amazon |
| ASTEMO / HITACHI Popular Fits: 3.0L V6 Turbocharged | VTS0016 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| BECK/ARNLEY Fits: 3.0L V6 Turbocharged | 0242198 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| CLOYES Fits: 3.0L V6 Turbocharged | VTS204 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| NTK Fits: 3.0L V6 Turbocharged | VV0134 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 3.0L V6 Turbocharged | VVT250 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Shaft Diameter (In): 0.7 | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
9 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2021 Infiniti Q50, from HOLSTEIN, GATES, ACKOJA and 5 other brands. ACKOJA A380327 carries the "Popular" badge.
Economy: 3 parts, from HOLSTEIN and GATES. A representative part number is GATES VVS247.
The Standard Replacement section: 6 options from ACKOJA, ASTEMO / HITACHI, BECK/ARNLEY and 3 other brands. ACKOJA A380327 is listed in this group.
This group includes ACKOJA A380327, GATES VVS247 and HOLSTEIN 2VTS0279 and the remaining parts above.
Buying Engine Parts for a 2021 Infiniti Q50
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2021 Infiniti Q50?
Our catalog currently lists 153 engine parts for the 2021 Infiniti Q50 across 30 subcategories and 48 brands, covering both the 3.0L V6 Turbocharged and the 3.5L V6 ELECTRIC/GAS. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2021 Infiniti Q50 engines?
Some do. 16 parts fit every engine; the other 137 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2021 Infiniti Q50?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2021 Infiniti Q50?
Oil rows on this page include SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 Infiniti Q50 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2021 Infiniti Q50?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2021 Infiniti Q50
Engine Parts for Other Infiniti Q50 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.