2021 Infiniti QX60 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 69 engine parts for the 2021 Infiniti QX60, across 21 part types, covering both the 2.5L L4 ELECTRIC/GAS Supercharged and the 3.5L V6. Every part shows its brand, manufacturer part number and fitment notes.

On the 2021 Infiniti QX60, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Oil Filter (9 parts), Crankshaft Seal (7 parts) and Cylinder Head Gasket (6 parts). The other 18 part types cover the remaining 47 parts.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.5L L4 ELECTRIC/GAS Supercharged 54338000
🇲🇽 MX
View on
Amazon
AJUSA Fits: 3.5L V6 54211900
🇲🇽 MX
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.5L L4 ELECTRIC/GAS Supercharged 15045100
🇲🇽 MX
FrontClockwise
View on
Amazon
AJUSA Fits: 2.5L L4 ELECTRIC/GAS Supercharged 15127800
🇲🇽 MX
RearCounter Clockwise
View on
Amazon
AJUSA Fits: 3.5L V6 15092900
🇲🇽 MX
FrontClockwise
View on
Amazon
AJUSA Fits: 3.5L V6 71008800
🇲🇽 MX
Rear
View on
Amazon
ELRING Fits: 2.5L L4 ELECTRIC/GAS Supercharged 023530
🇲🇽 MX
Height [MM]: 7Inner Diameter [mm]: 46
Fitment notes — ELRING 023530
Height [MM]: 7Inner Diameter [mm]: 46Material: FPM (Fluoride Rubber)Swirl Type: Right-hand Twist
Body code: L50
View on
Amazon
ELRING Fits: 2.5L L4 ELECTRIC/GAS Supercharged 587460
🇲🇽 MX
Height [MM]: 8,5Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
Fitment notes — ELRING 587460
Height [MM]: 8,5Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
Body code: L50
View on
Amazon
ELRING Fits: 3.5L V6 576160
🇲🇽 MX
Height [MM]: 7Material: FPM (Fluoride Rubber)
Fitment notes — ELRING 576160
Height [MM]: 7Material: FPM (Fluoride Rubber)
Body code: L50
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA Fits: 3.5L V6 81047800
🇲🇽 MX
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.5L L4 ELECTRIC/GAS Supercharged 10226900
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10226900
Multi Layered Steel
89.5 Bore Diameter
View on
Amazon
AJUSA Fits: 3.5L V6 10181300
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10181300
Multi Layered Steel
Right96 Bore Diameter
View on
Amazon
AJUSA Fits: 3.5L V6 10181200
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10181200
Multi Layered Steel
Left96 Bore Diameter
View on
Amazon
AJUSA Fits: 3.5L V6 52407500
🇲🇽 MX
Right
View on
Amazon
AJUSA Fits: 3.5L V6 52407600
🇲🇽 MX
Left
View on
Amazon
ELRING Fits: 2.5L L4 ELECTRIC/GAS Supercharged 466490
🇲🇽 MX
Diameter [MM]: 89,7
Fitment notes — ELRING 466490
Diameter [MM]: 89,7
Body code: L50
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.5L L4 ELECTRIC/GAS Supercharged 52482100
🇲🇽 MX
View on
Amazon
AJUSA Fits: 3.5L V6 52407400
🇲🇽 MX
Complete Set
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.5L L4 ELECTRIC/GAS Supercharged 50581700
🇲🇽 MX
View on
Amazon
AJUSA Fits: 3.5L V6 50369600
🇲🇽 MX
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.5L L4 ELECTRIC/GAS Supercharged 13277400
🇲🇽 MX
View on
Amazon
AJUSA Fits: 3.5L V6 13261900
🇲🇽 MX
View on
Amazon
ELRING Fits: 2.5L L4 ELECTRIC/GAS Supercharged 466540
🇲🇽 MX
Body code: L50
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Manifold Runner Control Valve / Solenoid

Brand Part Number Markets Notes Buy
DORMAN Fits: 3.5L V6 911506
🇲🇽 MX
Fits Right
Fitment notes — DORMAN 911506
Fits:
Right
or:
Left
View on
Amazon

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.

Motor Mount

Brand Part Number Markets Notes Buy
WESTAR Popular Fits: 3.5L V6 EM5869
🇲🇽 MX
FrontFWD
View on
Amazon
WESTAR Fits: 3.5L V6 EM5866
🇲🇽 MX
Right
View on
Amazon
WESTAR Fits: 3.5L V6 EM7334
🇲🇽 MX
RearAWD
View on
Amazon
WESTAR Fits: 3.5L V6 EM7333
🇲🇽 MX
FrontAWD
View on
Amazon
WESTAR Fits: 3.5L V6 EM7175
🇲🇽 MX
RearFWD
View on
Amazon

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Oil Cooler

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 3.5L V6 OCK34
🇲🇽 MX
Port Quantity: Not Included
Fitment notes — STANDARD MOTOR PRODUCTS OCK34
Port Quantity: Not Included
4 Outlet Ports
View on
Amazon

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN Fits: all 2021 QX60 engines 090038
🇲🇽 MX
StandardM12-1.25
Fitment notes — DORMAN 090038
StandardM12-1.25Head Size 14MM
View on
Amazon
DORMAN Fits: all 2021 QX60 engines 090049
🇲🇽 MX
Pilot PointM12-1.25
Fitment notes — DORMAN 090049
Pilot PointM12-1.25Head Size 13MM
View on
Amazon
ELRING Fits: all 2021 QX60 engines 587290
🇲🇽 MX
without Seal RingBolt Head-/Nut Design: Male Hex
Fitment notes — ELRING 587290
without Seal RingBolt Head-/Nut Design: Male HexThread Size: M12X1,25x11
Body code: L50
View on
Amazon
REIN Fits: all 2021 QX60 engines HWU0112
🇲🇽 MX
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.5L L4 ELECTRIC/GAS Supercharged 01140600
🇲🇽 MX
with Original Equipment (OE) # 11026-BX000
View on
Amazon
DORMAN Fits: all 2021 QX60 engines 097134
🇲🇽 MX
SizeM10
Fitment notes — DORMAN 097134
SizeM10Inside Dia: 0.44"/11.2mmOutside Dia.: 0.69"/17.6mmThickness: 0.139"/3.55mm
View on
Amazon
DORMAN Fits: all 2021 QX60 engines 997134CD
🇲🇽 MX
View on
Amazon
ELRING Fits: all 2021 QX60 engines 776327
🇲🇽 MX
Material: CopperOuter Diameter [MM]: 17,5
Fitment notes — ELRING 776327
Material: CopperOuter Diameter [MM]: 17,5Shape: Angled
Body code: L50
View on
Amazon
FEL-PRO Fits: 3.5L V6 73347
🇲🇽 MX
0.500 (in) Inside Diameter x 0.750 (in) Outside DiameterCopper
Fitment notes — FEL-PRO 73347
0.500 (in) Inside Diameter x 0.750 (in) Outside DiameterCopperFlat Washer
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
FVP Fits: 3.5L V6 R1358
🇲🇽 MX
OE# 15208-65F0E
View on
Amazon
PRO-TEC Fits: 3.5L V6 PXL51358
🇲🇽 MX
View on
Amazon
VARIOUS MFR Fits: all 2021 QX60 engines PG4612
🇲🇽 MX
View on
Amazon
VARIOUS MFR Fits: all 2021 QX60 engines PO4612NS1
🇲🇽 MX
OE Style
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
WIX Popular Fits: 3.5L V6 51358XP
🇲🇽 MX
XP Extreme DutyBest for Synthetic Motor Oils
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WIX Popular Fits: 3.5L V6 51358
🇲🇽 MX
View on
Amazon
MAHLE / CLEVITE Fits: all 2021 QX60 engines OC1566
🇲🇽 MX
Spin-On
Fitment notes — MAHLE / CLEVITE OC1566
Spin-On
Powersports
View on
Amazon
MANN Fits: 3.5L V6 MW64
🇲🇽 MX
Height: 2.6 InStyle: Spin-On Lube Filter
View on
Amazon
VARIOUS MFR Fits: all 2021 QX60 engines PG4612EX
🇲🇽 MX
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan

Brand Part Number Markets Notes Buy
DORMAN Fits: 3.5L V6 264505
🇲🇽 MX
LowerOE Design
View on
Amazon
SPECTRA PREMIUM Fits: 3.5L V6 NSP47A
🇲🇽 MX
LowerGasket and/or Sealant Not Included
View on
Amazon

This table covers the oil pans that hold the engine's oil sump.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 3.5L V6 14063600
🇲🇽 MX
Upper
View on
Amazon
AJUSA Fits: 3.5L V6 14063700
🇲🇽 MX
Lower
View on
Amazon
ELRING Fits: 3.5L V6 572760
🇲🇽 MX
Body code: L50
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Chain & Component Kit

Brand Part Number Markets Notes Buy
INA Fits: 2.5L L4 ELECTRIC/GAS Supercharged ZC76322T
🇲🇽 MX
Includes 1 Chain, 1 Crank Sprocket, 1 Tensioner Arm, 1 Guide, 1 TensionerDoes Not Include Cam Sprocket
View on
Amazon

This table covers kits that group a timing chain with the related tensioners and guides.

Timing Cover Seal

Brand Part Number Markets Notes Buy
SKF Fits: 3.5L V6 18857
🇲🇽 MX
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Valve Cover

Brand Part Number Markets Notes Buy
DORMAN Fits: 2.5L L4 ELECTRIC/GAS Supercharged 263211
🇲🇽 MX
View on
Amazon
DORMAN Fits: 3.5L V6 264787
🇲🇽 MX
Rear
View on
Amazon
SKP Fits: 2.5L L4 ELECTRIC/GAS Supercharged SK260040
🇲🇽 MX
View on
Amazon

This table covers the Valve covers.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.5L L4 ELECTRIC/GAS Supercharged 11144400
🇲🇽 MX
View on
Amazon
AJUSA Fits: 3.5L V6 56058500
🇲🇽 MX
Right
View on
Amazon
AJUSA Fits: 3.5L V6 56058600
🇲🇽 MX
Left
View on
Amazon
ELRING Fits: 2.5L L4 ELECTRIC/GAS Supercharged 466500
🇲🇽 MX
Body code: L50
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Spring Retainer Keeper

Brand Part Number Markets Notes Buy
QUALCAST Fits: 3.5L V6 345012
🇲🇽 MX
1 Round Groove
View on
Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: all 2021 QX60 engines 12012100
🇲🇽 MX
5 x 9.7 x 11.5
View on
Amazon
AJUSA Fits: 2.5L L4 ELECTRIC/GAS Supercharged 57024800
🇲🇽 MX
View on
Amazon
AJUSA Fits: 3.5L V6 57058800
🇲🇽 MX
View on
Amazon
ELRING Fits: 2.5L L4 ELECTRIC/GAS Supercharged 012410
🇲🇽 MX
Height [MM]: 11,1Inner Diameter [MM]: 9,8
Fitment notes — ELRING 012410
Height [MM]: 11,1Inner Diameter [MM]: 9,8Material: ACM (Polyacrylate)Valve Stem Diameter [MM]: 6
Body code: L50
View on
Amazon
FEL-PRO Fits: 3.5L V6 SS72821
🇲🇽 MX
Set
Fitment notes — FEL-PRO SS72821
Set
Intake and Exhaust
View on
Amazon
QUALCAST Fits: 3.5L V6 3899455
🇲🇽 MX
Guide Inside Diameter (mm): 9.73Viton Metal Clad
Fitment notes — QUALCAST 3899455
Guide Inside Diameter (mm): 9.73Viton Metal Clad
Viton Metal Clad
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2021 Infiniti QX60

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Crankshaft Seal .

Frequently Asked Questions

How many engine parts fit the 2021 Infiniti QX60?

Our catalog currently lists 69 engine parts for the 2021 Infiniti QX60 across 21 subcategories and 18 brands, covering both the 2.5L L4 ELECTRIC/GAS Supercharged and the 3.5L V6. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2021 Infiniti QX60 engines?

Some do. 12 parts fit every engine; the other 57 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2021 Infiniti QX60?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 Infiniti QX60 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2021 Infiniti QX60?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2021 Infiniti QX60

Engine Parts for Other Infiniti QX60 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.