2005 International 3300 Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CR8038CP.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 2005 International 3300 come from ELRING.

Listed part numbers: ELRING 832600 and ELRING 832570.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2005 International 3300 — MELLING V2180.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 High Pressure Diesel Injection Oil Pump (HPOP) parts are listed for the 2005 International 3300, from GB REMANUFACTURING and STANDARD MOTOR PRODUCTS.

Listed part numbers: GB REMANUFACTURING 739206 and STANDARD MOTOR PRODUCTS HPI7.

This table covers the High Pressure Oil Rail repair kits. Read more

One part is listed for the 2005 International 3300 — GB REMANUFACTURING 522037.

This table covers the seals at the High Pressure Oil Rail. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2005 International 3300 — STANDARD MOTOR PRODUCTS SK145.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2005 International 3300 — MELLING V2179.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

One part is listed for the 2005 International 3300 — STANDARD MOTOR PRODUCTS OCK1.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS OCG1.

This table covers the drain plugs in the oil pan. Read more

One part is listed for the 2005 International 3300 — DORMAN 090177.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts are listed for the 2005 International 3300, from VARIOUS MFR, HASTINGS / BALDWIN, WIX and 1 other brand. HASTINGS / BALDWIN LF632 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR supplies 2 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PG5526.

The Standard Replacement section lists 5 options from HASTINGS / BALDWIN, WIX and FEL-PRO — built to original-equipment specification. HASTINGS / BALDWIN LF632 is listed in this group.

Part numbers include HASTINGS / BALDWIN LF632, VARIOUS MFR PG5526 and VARIOUS MFR PG5526FC, among others listed above.

This table covers the Oil Filter covers. Read more

This group shows a single part: DORMAN 904204.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS SK142.

This table covers the Oil Stand pipes. Read more

One part is listed for the 2005 International 3300 — GB REMANUFACTURING 522073.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

This group shows a single part: MELLING MPR662.

This table covers the turbochargers that compress intake air. Read more

3 Turbocharger parts are listed for the 2005 International 3300, from GPD, ROTOMASTER and STANDARD MOTOR PRODUCTS.

Part numbers include GPD 2511850, ROTOMASTER A1360100N and STANDARD MOTOR PRODUCTS TBC593.

This table covers the fasteners that mount the turbocharger. Read more

2 Turbocharger Mounting Hardware parts for the 2005 International 3300 come from 2 brands — DORMAN and SKP.

Listed part numbers: DORMAN 904234 and SKP SK904234.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

3 Turbocharger Oil Line parts are listed for the 2005 International 3300, from GATES and SUNSONG.

This group includes GATES TL102, GATES TL100 and SUNSONG 5801033.

This table covers the Turbocharger Up pipes. Read more

4 Turbocharger Up Pipe parts for the 2005 International 3300 come from 2 brands — DORMAN and SKP.

This group includes DORMAN 679010, DORMAN 679023 and DORMAN 679024 and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts are listed for the 2005 International 3300, from DORMAN and GB REMANUFACTURING.

This group includes DORMAN 904401 and GB REMANUFACTURING 522031.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts for the 2005 International 3300 come from MELLING.

The High Performance section lists 1 option from MELLING — engineered beyond original-equipment specification. MELLING 466704 is listed in this group.

Standard Replacement: 1 part, from MELLING. A representative part number is MELLING VS1458.

Listed part numbers: MELLING 466704 and MELLING VS1458.